Non-maximal entanglement of photons from positron-electron annihilation demonstrated using a novel plastic PET scanner
P. Moskal, D. Kumar, S. Sharma, E.Y. Beyene, N. Chug, A. Coussat, C. Curceanu, E. Czerwinski, M. Das, K. Dulski, M. Gorgol, B. Jasinska, K. Kacprzak, T. Kaplanoglu, L. Kaplon, K. Klimaszewski, T. Kozik, E. Lisowski, F. Lisowski, W. Mryka, S. Niedzwiecki, S. Parzych, E.P. del Rio, L. Raczynski, M. Radler, R.Y. Shopa, M. Skurzok, E. L. Stepien, P. Tanty, K. Tayefi Ardebili, K. Valsan Eliyan, W. Wislicki
abstract
In the state-of-the-art Positron Emission Tomography (PET), information about the polarization of annihilation photons is not available. Current PET systems track molecules labeled with positron-emitting radioisotopes by detecting the propagation direction of two photons from positron-electron annihilation. However, annihilation photons carry more information than just the site where they originated. Here we present a novel J-PET scanner built from plastic scintillators, in which annihilation photons interact predominantly via the Compton effect, providing information about photon polarization in addition to information on photon direction of propagation. Theoretically, photons from the decay of positronium in a vacuum are maximally entangled in polarization. However, in matter, when the positron from positronium annihilates with the electron bound to the atom, the question arises whether the photons from such annihilation are maximally entangled. In this work, we determine the distribution of the relative angle between polarization orientations of two photons from positron-electron annihilation in a porous polymer. Contrary to prior results for positron annihilation in aluminum and copper, where the strength of observed correlations is as expected for maximally entangled photons, our results show a significant deviation. We demonstrate that in porous polymer, photon polarization correlation is weaker than for maximally entangled photons but stronger than for separable photons. The data indicate that more than 40% of annihilations in Amberlite resin lead to a non-maximally entangled state. Our result indicates the degree of correlation depends on the annihilation mechanism and the molecular arrangement. We anticipate that the introduced Compton interaction-based PET system opens a promising perspective for exploring polarization correlations in PET as a novel diagnostic indicator.
Realistic Total-Body J-PET Geometry Optimization--Monte Carlo Study
J. Baran, W. Krzemień, L. Raczyński, M. Bała, A. Coussat, S. Parzych, N. Chug, E. Czerwiński, C. Oana Curceanu, M. Dadgar, K. Dulski, K. Eliyan, J. Gajewski, A. Gajos, B. Hiesmayr, K. Kacprzak, Ł. Kapłon, K. Klimaszewski, G. Korcyl, T. Kozik, D. Kumar, S. Niedźwiecki, D. Panek, E. Perez del Rio, A. Ruciński, S. Sharma, Shivani, R.Y. Shopa, M. Skurzok, E. Stępień, F. Tayefiardebili, K. Tayefiardebili, W. Wiślicki, P. Moskal
abstract
Total-Body PET imaging is one of the most promising newly introduced modalities in the medical diagnostics. State-of-the-art PET scanners use inorganic scintillators such as L(Y)SO or BGO, however, those technologies are very expensive, prohibitng the broad total-body PET applications. We present the comparative studies of performance characteristics of the cost-effective Total-Body PET scanners using Jagiellonian PET (J-PET) technology that is based on plastic scintillators. Here, we investigated in silico five realistic Total-Body scanner geometries, varying the number of rings, scanner radius, and distance between the neighbouring rings. Monte Carlo simulations of two NEMA phantoms (2-meter sensitivity line source and image quality) and the anthropomorphic XCAT phantom, were used to assess the performance of the tested geometries. We compared the sensitivity profiles and we performed the quantitative analysis of the reconstructed images by using the quality metrics such as contrast recovery coefficient, background variability and root mean squared error. The optimal scanner design was selected for the first Total-Body J-PET scanner configuration.
Positron Emission Tomography Could Be Aided by Entanglement
P. Moskal
abstract
The quantum entanglement of photons used in positron emission tomography (PET) scans has been shown to be surprisingly robust, opening prospects for developing quantum-enhanced PET schemes.
Performance evaluation of the modular J-PET detector in conventional PET imaging
M. Das , R. Bayerlein , S. Parzych, S. Sharma, R. D. Badawi , E. Y. Beyene, E. Czerwiński, , A. Hubalewska-Dydejczyk , T. Kaplanoglu, G. Korcyl, W. Mryka, S. Niedźwiecki, M. Opalińska, M. Rädler, M. Skurzok, B. A Spencer, P. Tanty, K. Tayefi Ardebili, P. Moskal, E.Ł. Stepien
abstract
Positronium image of the human brain in vivo
P. Moskal, J. Baran, S. Bass, J. Choiński, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, M. Das, K. Dulski, K.V. Eliyan, K. Fronczewska, A. Gajos, K. Kacprzak, M. Kajetanowicz, T. Kaplanoglu, Ł. Kapłon, K. Klimaszewski, M. Kobylecka, G. Korcyl, T. Kozik, W. Krzemień, K. Kubat, D. Kumar, J. Kunikowska, J. Mączewska, W. Migdał, G. Moskal, W. Mryka, S. Niedźwiecki, S. Parzych, E. Perez del Rio, L. Raczyński, S. Sharma, Shivani, R.Y. Shopa, M. Silarski, M. Skurzok, F. Tayefi, K. Tayefi, P. Tanty, W. Wiślicki, L. Królicki, E. Ł. Stępień
abstract
Positronium is abundantly produced within the molecular voids of a patient?s body during positron emission tomography (PET). Its properties dynamically respond to the submolecular architecture of the tissue and the partial pressure of oxygen. Current PET systems record only two annihilation photons and cannot provide information about the positronium lifetime. This study presents the in vivo images of positronium lifetime in a human, for a patient with a glioblastoma brain tumor, by using the dedicated Jagiellonian PET system enabling simultaneous detection of annihilation photons and prompt gamma emitted by a radionuclide. The prompt gamma provides information on the time of positronium formation. The photons from positronium annihilation are used to reconstruct the place and time of its decay. In the presented case study, the determined positron and positronium lifetimes in glioblastoma cells are shorter than those in salivary glands and those in healthy brain tissues, indicating that positronium imaging could be used to diagnose disease in vivo.
Positronium lifetime validation measurements using a long-axial field-of-view positron emission tomography scanner
W. M. Steinberger, L. Mercolli, J. Breuer, H. Sari, S. Parzych, S. Niedzwiecki, G. Lapkiewicz, P. Moskal, E. Stepien, A. Rominger, K. Shi, M. Conti
abstract
Background: Positron emission tomography (PET) traditionally uses coincident
annihilation photons emitted from a positron interacting with an electron to localize
cancer within the body. The formation of positronium (Ps), a bonded electron-positron
pair, has not been utilized in clinical applications of PET due to the need to detect
either the emission of a prompt gamma ray or the decay of higher-order coincident
events. Assessment of the lifetime of the formed Ps, however, can potentially yield
additional diagnostic information of the surrounding tissue because Ps properties vary
due to void size and molecular composition. To assess the feasibility of measuring Ps
lifetimes with a PET scanner, experiments were performed in a Biograph Vision Quadra
(Siemens Healthineers). Quadra is a long-axial field-of-view (LA-FOV) PET scanner capable
of producing list-mode data from single interaction events.
Results: Ortho-Ps (o-Ps) lifetimes were measured for quartz-glass and polycarbonate
samples using a 22Na positron source. Results produced o-Ps lifetimes of 1.538 ? 0.036
ns for the quartz glass and 1.927 ? 0.042 ns for the polycarbonate. Both o-Ps lifetimes
were determined using a double-exponential fit to the time-difference distribution
between the emission of a prompt gamma ray and the annihilation of the correlated
positron. The measured values match within a single standard deviation of previously
published results. The quartz-glass samples were additional measured with 82Rb , 68 Ga
and 124I to validate the lifetime using clinically available sources. A double-exponential
fit was initially chosen as a similar methodology to previously published works, however,
an exponentially-modified Gaussian distribution fit to each lifetime more-accurately
models the data. A Bayesian method was used to estimate the variables of the fit
and o-Ps lifetime results are reported using this methodology for the three clinical
isotopes: 1.59 ? 0.03 ns for 82Rb , 1.58 ? 0.07 ns for 68Ga and 1.62 ? 0.01 ns for 124I . The
impact of scatter and attenuation on the o-Ps lifetime was also assessed by analyzing
a water-filled uniform cylinder (20 × 30 cm3 ) with an added 82Rb solution. Lifetimes
were extracted for various regions of the cylinder and while there is a shape difference
in the lifetime due to scatter, the extracted o-Ps lifetime of the water, 1.815 ? 0.013 ns,
agrees with previously published results.
Conclusion: Overall, the methodology presented in this manuscript demonstrates
the repeatability of Ps lifetime measurements with clinically available isotopes
in a commercially-available LA-FOV PET scanner. This validation work lays the foundation
for future in-vivo patient scans with Quadra.
Feasibility of the J-PET to monitor range oftherapeutic proton beams
J. Baran, D. Borys, K. Brzeziński, J. Gajewski, M. Silarski, N. Chug, A. Coussat, E. Czerwiński, M. Dadgar, K. Dulski, K.V. Eliyan, A. Gajos, K. Kacprzak, Ł. Kapłon, K. Klimaszewski, P. Konieczka, R. Kopeć, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, A.J. Lomax, K. McNamara, S. Niedźwiecki, P. Olko, D. Panek, S. Parzych, E. Perez del Rio, L. Raczyński, M. Simbarashe, S. Sharma, Shivani, R.Y. Shopa, T. Skóra, M. Skurzok, P. Stasica, E.Ł. Stępień, K. Tayefi, F. Tayefi, D.C. Weber, C. Winterhalter, W. Wiślicki, P. Moskal, A. Ruciński
abstract
Objective: The aim of this work is to investigate the feasibility of the JagiellonianPositron Emission Tomography (J-PET) scanner for intra-treatment proton beamrange monitoring. Approach: The Monte Carlo simulation studies with GATE and PET imagereconstruction with CASToR were performed in order to compare six J-PET scannergeometries (three dual-heads and three cylindrical). We simulated proton irradiationof a PMMA phantom with a Single Pencil Beam (SPB) and Spread-Out BraggPeak (SOBP) of various ranges. The sensitivity and precision of each scanner werecalculated, and considering the setup?s cost-effectiveness, we indicated potentiallyoptimal geometries for the J-PET scanner prototype dedicated to the proton beamrange assessment. Main results: The investigations indicate that the double-layer cylindrical andtriple-layer double-head configurations are the most promising for clinical application.We found that the scanner sensitivity is of the order of 10?5coincidences per primaryproton, while the precision of the range assessment for both SPB and SOBP irradiationplans was found below 1 mm. Among the scanners with the same number of detectormodules, the best results are found for the triple-layer dual-head geometry. Significance: We performed simulation studies demonstrating that the feasibilityof the J-PET detector for PET-based proton beam therapy range monitoring ispossible with reasonable sensitivity and precision enabling its pre-clinical tests in theclinical proton therapy environment. Considering the sensitivity, precision and cost-effectiveness, the double-layer cylindrical and triple-layer dual-head J-PET geometryconfigurations seem promising for the future clinical application. Experimental testsare needed to confirm these findings.
Feasibility studies for imaging e+e- annihilation with modular multi-strip detectors
S. Sharma, L. Povolo, S. Mariazzi, G. Korcyl, K. Kacprzak, D. Kumar, S. Niedzwiecki, J. Baran, E. Beyene, R. S. Brusa, R. Caravita, N. Chug, A. Coussat, C. Curceanu, E. Czerwinski, M. Dadgar, M. Das, K. Dulski, K. Eliyan, A. Gajos, N. Gupta, B. C. Hiesmayr, L. Kaplon, T. Kaplanoglu, K. Klimaszewski, P. Konieczka, T. Kozik, M. K. Kozani, W. Krzemien, S. Moyo, W. Mryka, L. Penasa, S. Parzych, E. Perez Del Rio, L. Raczynski, R. Y. Shopa, M. Skurzok, E. L. Stepien, P. Tanty, F. Tayefi, K. Tayefi, W. Wislicki, P. Moskal
abstract
Studies based on imaging the annihilation of the electron (e-) and its antiparticle positron (e+) open up several interesting applications in nuclear medicine and fundamental research. The annihilation process involves both the direct conversion of ee into photons and the formation of their atomically bound state, the positronium atom (Ps), which can be used as a probe for fundamental studies. With the ability to produce large quantities of Ps, manipulate them in long-lived Ps states, and image their annihilations after a free fall or after passing through atomic interferometers, this purely leptonic antimatter system can be used to perform inertial sensing studies in view of a direct test of Einstein equivalence principle. It is envisioned that modular multistrip detectors can be exploited as potential detection units for this kind of studies. In this work, we report the results of the first feasibility study performed on a e beamline using two detection modules to evaluate their reconstruction performance and spatial resolution for imaging ee annihilations and thus their applicability for gravitational studies of Ps.
SPLIT: Statistical Positronium Lifetime Image reconstruction via time-Thresholding
B. Huang, T. Li, G, Arino-Estrada, K. Dulski, R.Y. Shopa, P. Moskal, E. Stępień, J. Qi
abstract
Positron emission tomography (PET) is a widely utilized medical imaging modality that uses positron-emitting radiotracers to visualize biochemical processes in a living body. The spatiotemporal distribution of a radiotracer is estimated by detecting the coincidence photon pairs generated through positron annihilations. In human tissue, about 40% of the positrons form positroniums prior to the annihilation. The lifetime of these positroniums is influenced by the microenvironment in the tissue and could provide valuable information for better understanding of disease progression and treatment response. Currently, there are few methods available for reconstructing high-resolution lifetime images in practical applications. This paper presents an efficient statistical image reconstruction method for positronium lifetime imaging (PLI). We also analyze the random triple-coincidence events in PLI and propose a correction methodfor random events, which is essential for real applications. Both simulation andexperimental studies demonstrate that the proposed method can produce lifetime images with high numerical accuracy, low variance, and resolution comparable to that of the activity images generated by a PET scanner with currently available time-of-flight resolution.
Discrete symmetries tested at 10^-4 precision using linear polarization of photons from positronium annihilations
P. Moskal, E. Czerwiński, J. Raj, S. D. Bass, E. Beyene, N. Chug, A. Coussat, C. Curceanu, M. Dadgar, M. Das, K. Dulski, A. Gajos, M. Gorgol, B. C. Hiesmayr, B. Jasińska, K. Kacprzak, T. Kaplanoglu, Ł. Kapłon, K. Klimaszewski, P. Konieczka, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, S. Moyo, W. Mryka, S. Niedźwiecki, S. Parzych, E. Pérez del Río, L. Raczyński, S. Sharma, S. Choudhary, R. Y. Shopa, M. Silarski, M. Skurzok, E. Ł. Stępień, P. Tanty, F. T. Ardebili, K. T. Ardebili, K. V. Eliyan, W. Wiślicki
abstract
Discrete symmetries play an important role in particle physics with violation of CP connected to the matter-antimatter imbalance in the Universe. We report the most precise test of P, T and CP invariance in decays of ortho-positronium, performed with methodology involving polarization of photons from these decays. Positronium, the simplest bound state of an electron and positron, is of recent interest with discrepancies reported between measured hyperfine energy structure and theory at the level of 10^-4 signaling a need for better understanding of the positronium system at this level. We test discrete symmetries using photon polarizations determined via Compton scattering in the dedicated J-PET tomograph on an event-by-event basis and without the need to control the spin of the positronium with an external magnetic field, in contrast to previous experiments. Our result is consistent with QED expectations at the level of 0.0007 and one standard deviation.
Estimating influence of positron range in proton-therapy-beam monitoring with PET
W. Mryka, M. Das, E.Y. Beyene, P. Moskal, E. Stępień
abstract
The application of PET scanners to proton-beam-therapy monitoring is a promising solution to obtain the range of the beam and hence the positions of a Bragg peak - maximum dose deposition point. A proton beam induces nuclear reactions in the tissue, leading to the production of isotopes that emit beta+ radiation. This enables the imaging of the density distribution of beta+ isotopes produced in the body, allowing the reconstruction of the proton beam range. Moreover, PET detectors may open the possibility for in-beam monitoring, which would offer an opportunity to verify the range during irradiation. PET detectors may also allow positronium imaging, which would be the indicator of the tissue conditions. However, the image of annihilation points does not represent the range of the proton beam. There are several factors influencing the translation from annihilation points to obtain the Bragg peak position. One of them is the kinetic energy of the positron. This energy corresponds to some range of the positron within the tissue. In this manuscript we estimate positron energy and its range and discuss its influence on proton therapy monitoring.
Exploration of simultaneous dual-isotope imaging with multi-photon modular J-PET scanner
Ermias Yitayew Beyene, Manish Das, Martyna Durak-Kozica, Grzegorz Korcyl, Wiktor Mryka, Szymon Niedźwiecki, Szymon Parzych, Keyvan Tayefi Ardebili, Rafał Walczak, Kamil Wawrowicz, Ewa Stępień, Paweł Moskal
abstract
The modular J-PET scanner, comprising 24 compact and versatile modules, each consisting of 13 plastic strips with four SiPM detectors at the ends, represents a powerful tool for clinical applications in nuclear medical imaging. This study presents preliminary results from the exploration of simultaneous dual-isotope imaging using the modular J-PET system. Our approach involved two isotopes: 68Ge, characterized by a ringlike shape, and 22Na, exhibiting a point-like shape. The imaging was based on double-coincidence and triple-coincidence events. In the double coincidence case, both isotopes contributed comparably, whereas in the triple coincidence case 22Na dominated due to the prompt gamma being emitted with 100% of positron emissions, unlike 68Ga, where the prompt gamma was emitted in only 1.3% of cases after positron emission. In this work we present direct 2? images determined for two-signal events and images for three-signal events, with two signals from annihilation photons and one from a prompt gamma. These results showcase the preliminary findings from simultaneous dual-isotope imaging of 68Ga and 22Na isotopes using the modular J-PET scanner, which will be presented and discussed.
Estimating the efficiency and purity for detecting annihilation and prompt photons for positronium imaging with J-PET using toy Monte Carlo simulation
M. Das, W. Mryka, E.Y. Beyene, S. Parzych, S. Sharma, E. Stępień, P. Moskal
abstract
The positronium imaging technique represents a potential enhancement of the PET imaging method. Its core principle involves employing a beta+ radiation source that emits additional gamma quanta referred to as prompt gamma. Our aim is to evaluate the capability to differentiate between annihilation and prompt gamma emissions, a vital aspect of positronium imaging. For this purpose, the selected isotopes should enable high efficiency and purity in detecting both prompt gamma and annihilation gamma. The assessment of the efficiency in identifying prompt and annihilation photons for various isotopes, which are potentially superior candidates for beta++ gamma emitters, is conducted through toy Monte-Carlo simulation utilizing the cross-section formula for photon-electron scattering. In this article, we have performed calculations for efficiency and purity values across different isotopes under ideal conditions and examined how these values evolve as we incorporate the fractional energy resolution into the analysis. Ultimately, the primary goal is to determine the energy threshold that optimizes both efficiency and purity, striking a balance between accurately identifying and recording events of interest while minimizing contamination from undesired events.
A cross-staged gantry for total-body PET and CT imaging
M. Tevfik Kaplanoglu, P. Moskal
abstract
Total-body Positron Emission Tomography (PET) scanning is a promising new method for rapidly acquiring comprehensive wide-volume metabolic data with a lower radiation dosage compared to discrete whole-body PET imaging. PET scanners are generally used with Computed Tomography (CT) scanners to precisely understand tumor location and composition with the help of anatomical images. However, PET/CT sequential imaging methods for simultaneous total-body imaging are impractical for claustrophobic patients due to the enclosed gantry design and require large examination rooms because of the need for an exceptionally long patient table. To address this challenge, the Jagiellonian--PET Tomography (J-PET) Total-body scanner employs an innovative approach: utilizing both PET and CT devices on the same patient table but from different axes. The motion system of the J-PET Total Body scanner requires custom linear stages to move both PET and CT gantries. In this study, a novel cross-staged linear guiding solution is proposed by combining scanners on intersecting separable stages. The proposed sliding system is a combination of different machine elements and will be produced for the J-PET Total-body PET/CT Scanner. Concept designs are shown, and the proposed system is described. The application of the system for the J-PET total-body PET/CT scanner is discussed. The proposed solution is still in the development phase. The system holds the potential to achieve combining CT and PET scanners from different axes and enables motion artifact-free imaging for total-body imaging.
Evaluation of Modular J-PET sensitivity
F. Tayefi Ardebili, S. Niedźwiecki, P. Moskal
abstract
The Modular J-PET represents the latest advancement in the Jagiellonian-PET series, utilizing extended plastic scintillator strips. This prototype's modular design enables cost-effective imaging of multi-photon annihilation and positronium, allowing for easy assembly, portability, and versatility. Additionally, its lightweight construction facilitates static bed examinations with a mobile detection system that can be positioned conveniently alongside the patient, negating the requirement for spacious clinical settings. Comprising 24 modules arranged in regular 24- sided polygons circumscribing a 73.9 cm diameter circle, each module integrates 13 scintillator strips, measuring 50 cm in length and 6mm×24mm in cross-section. Scintillation light is captured at both ends through analog Silicon Photomultipliers (SiPMs). This research presents Sensitivity of the Modular J-PET tomograph, adhering to the NEMA_NU 2-2018 standards. Sensitivity measurement was performed with Ge line source inside the 5 sleeves aluminium phantom placed at center of the detector`s FOV and 10 cm offset from the center of detector. Analyzing the gathered data involved employing the specialized J-PET Framework software, developed within the C++ architecture. To validate the experimental findings, comparisons were made with GATE simulations, wherein the source and phantom were emulated in the same configuration as employed in the actual experiment. The system sensitivity of the Modular J-PET was assessed to be 1.03 ? 0.02 cps/kBq in the center of the detector`s FOV with the peak sensitivity of 2.1 cps/kBq. However, the simulations indicate that at the center of the detector's FOV, the Modular J-PET achieves a system sensitivity of 1.32 ? 0.03 cps/kBq, with a peak sensitivity of 2.9 cps/kBq.
Optimization of the WLS design for positron emission mammography and Total-Body J-PET systems
A. Georgadze, S. Shivani, K. Tayefi Ardebili, P. Moskal
abstract
Total body positron emission tomography (PET) instruments are medical imaging devices that detect and visualize metabolic activity in the entire body. The PET scanner has a ring-shaped detector that surrounds the patient, which detects the gamma rays emitted by the tracer as it decays. Usually, these detectors are made up of scintillation crystals coupled to photodetectors that convert the light produced by the scintillation crystal into electrical signals. The Jagiellonian Positron Emission Mammograph (J-PEM) is the first J-PET prototype module based on a novel idea with a plastic scintillator and wavelength shifter (WLS). At the same time, it is a prototype module for the total-body J-PET system. J-PEM can be an effective system for the detection and diagnosis of breast cancer in its early stage by improving sensitivity. This can be achieved using superior timing properties of plastic scintillators and combined with the WLS sheets readout. In this paper, we present an application of the Geant4 program for simulating optical photon transport in the J-PEM module. We aim to study the light transport within scintillator bars and WLS sheets to optimize gamma-ray hit position resolution. We simulated a pencil beam of 511 keV photons impinging the scintillator bar at different locations. For each condition, we calculated the value of the pulse height centroid and the spread of the photon distribution. Some free parameters of the simulation, like the reflectivity and the effective attenuation length in the sheet, were determined from a comparison to experimental data. Finally, we estimate the influence of the application of WLS layer in the total-body J-PET on the scatter fraction. To optimize the performance of the J-PEM module, we compared geometry with the number of WLS strips 50 and 83. It was found, that spatial resolution was 2.7 mm and 3.5 mm FWHM for 50 and 83 WLS strips respectively. Despite the better granularity, the 83-strip WLS geometry exhibits poorer resolution due to fewer photons being transmitted to the strip, resulting in large fluctuations of signal.
Optimization of positronium imaging performance of a simulated modular J-PET scanner using GATE software
S. Parzych
abstract
J-PET application as a Compton camera for proton beam range verification: A preliminary study
M. K. Kozani, A. Rucinski, P. Moskal
abstract
Hybrid in-beam PET/Compton camera imaging currently shows a promising approach to use of the quasi-real-time range verification technique in proton therapy. This work aims to assess the capability of utilizing a configuration of the Jagiellonian-positron emission tomography (J-PET) scanner made of plastic scintillator strips, so as to serve as a Compton camera for proton beam range verification. This work reports the production yield results obtained from the GATE/Geant4 simulations, focusing on an energy spectrum (4.2?4.6) MeV of prompt gamma (PG) produced from a clinical proton beam impinging on a water phantom. To investigate the feasibility of J-PET as a Compton camera, a geometrical optimisation was performed. This optimisation was conducted by a point spread function (PSF) study of an isotropic 4.44 MeV gamma source. Realistic statistics of 4.44 MeV PGs obtained from the prior step were employed, simulating interactions with the detector. A sufficient number of detected photons was obtained for the source position reconstruction after performing a geometry optimisation for the proposed J-PET detector. Furthermore, it was demonstrated that more precise calculation of the total deposited energy of coincident events plays a key role in improving the image quality of source distribution determination. A reasonable spatial resolution of 6.5 mm FWHM along the actual proton beam direction was achieved for the first imaging tests. This preliminary study has shown notable potential in using the J-PET application for in-beam PET/Compton camera imaging at quasi-real-time proton range monitoring in future clinical use.
Application of an ultra-high dose rate (FLASH) proton beam for the 3D cancer cell model - a proof of concept
M. Durak-Kozica, E. Stępień, J. Swakoń, P. Moskal
abstract
Ultra-high dose rate (FLASH) proton radiotherapy is a promising treatment method for cancer patients. In our research, we want to compare the FLASH method with a conventional radiation method to show what effect they have on the biochemical structure of the tumour (3D model ? spheroids) and the secretion of extracellular vesicles (EVs) and their cargo. The use of a modern method of creating spheroids will enable us to create conditions that are better able to mimic the tumour microenvironment.
Experimental and analytical procedures for the ToF-SIMS measurement data of membranous structures
M. Skalska, M. Durak-Kozica
abstract
Time-of-flight secondary ion mass spectrometry (ToF-SIMS) is a powerful analytical technique with great application potential in biomolecular matter research. SIMS measurements performed on biological samples, due to their complex structure and the content of many small and large atomic molecular compounds, suffer very rich and complex mass spectra of particles, which characterise the content and physio-chemical properties of examined samples. The proper description and understanding of features appearing in the spectra and, consequently, the final data confirming or rejecting the hypothesis put forward in the experiment, largely depend on the experimenter?s correct understanding of the technique itself and its limitations, knowledge of the tested material and its appropriate preparation. These issues mean that obtaining the right answer to the questions posed in the research hypothesis requires not only the correct conduct of experiments but also the appropriate processing of post-experimental data. This study aims to demonstrate the impact of various analytical and experimental procedures applied to reach proper conclusions from TOF-SIM measurements. These are different types of data normalization, the selection of a so-called region of interest (ROI), the selection of representative secondary ions and specific quantification methods, including a combination of experimental parameters. All these aspects were checked and discussed based on the results of the analysis of pancreatic ? cells placed in a PBS solution on silicon wafers.
Comparison of cell casted and 3D-printed plastic scintillators for dosimetry applications
D. Kulig, Ł. Kapłon, G. Moskal, S. Beddar, T. Fiutowski, W. Górska, J. Hajduga, P. Jurgielewicz, D. Kabat, K. Kalecińska, M. Kopeć, S. Koperny, B. Mindur, J. Moroń, S. Niedźwiecki, M. Silarski, F. Sobczuk, T. Szumlak, A. Ruciński
abstract
Currently, the most used methods of plastic scintillator (PS) manufacturing are cell casting and bulk polymerisation, extrusion, injection molding, whereas digital light processing (DLP) 3D printing technique has been recently introduced. For our research, we measured blue-emitting EJ-200, EJ-208, green-emitting EJ-260, EJ-262 cell cast and two types of blue-emitting DLP-printed PSs. The light output of the samples, with the same dimension of 10 mm × 10 mm × 10 mm, was compared. The light output of the samples, relative to the reference EJ-200 cell-cast scintillator, equals about 40?49 and 70?73% for two types of 3D-printed, and two green-emitting cell-casted PSs, respectively. Performance of the investigated scintillators is sufficient to use them in a plastic scintillation dosemeter operating in high fluence gamma radiation fields.
Comparative studies of the sensitivities of sparse and full geometries of Total-Body PET scanners built from crystals and plastic scintillators
M. Dadgar, S. Parzych, J. Baran, N. Chug, C. Curceanu, E. Czerwiński, K. Dulski, K. Elyan, A. Gajos, B.C. Hiesmayr, Ł. Kapłon, K. Klimaszewski, P. Konieczka, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, S. Niedźwiecki, D. Panek, E. Perez del Rio, L. Raczyński, S. Sharma, Shivani, R.Y. Shopa, M. Skurzok, E. L. Stępień, F. Tayefi Ardebili, K. Tayefi Ardebili, S. Vandenberghe, W. Wiślicki and P. Moskal
abstract
Background: Alongside the benefits of Total-Body imaging modalities, such as higher sensitivity, single-bed position, low dose imaging, etc., their final construction cost prevents worldwide utilization. The main aim of this study is to present a simulation-based comparison of the sensitivities of existing and currently developed tomographs to introduce a cost-efficient solution for
constructing a Total-Body PET scanner based on plastic scintillators.
Methods: For the case of this study, eight tomographs based on the uEXPLORER configuration with different scintillator materials (BGO, LYSO), axial field-of-view (97.4 cm and 194.8 cm), and detector configuration (full and sparse) were simulated. In addition, 8 J-PET scanners with different configurations, such as various axial field-of-view (200 cm and 250 cm), the different cross-sections of plastic scintillator, and the multiple numbers of the
plastic scintillator layers (2, 3, and 4), based on J-PET technology have been simulated by GATE software. Furthermore, Biograph Vision has been simulated to compare the results with standard PET scans. Two types of simulations have been performed. The first one with a centrally located source with a diameter of 1mm and a length of 250 cm, and the second one with the same source inside a water-filled cylindrical phantom with a diameter of 20 cm and a length of 183 cm.
Results: With regards to sensitivity, among all the proposed scanners, the ones constructed with BGO crystals give the best performance (? 350 cps/kBq at the center). The utilization of sparse geometry or LYSO crystals significantly lowers the achievable sensitivity of such systems. The J-PET design gives a similar sensitivity to the sparse LYSO crystal-based detectors while having full detector coverage over the body. Moreover, it provides uniform sensitivity over the body
with additional gain on its sides and provides the possibility for high-quality brain
imaging.
Conclusion: Taking into account not only the sensitivity but also the price of the Total-Body PET tomographs, which till now was one of the main obstacles in their widespread clinical availability, the J-PET tomography system based on plastic scintillators could be a cost-efficient alternative for Total-Body PET scanners.
Transformation of PET raw data into images for event classification using convolutional neural networks
P. Konieczka, L. Raczyński, W. Wiślicki, O. Fedoruk, K. Klimaszewski, P. Kopka, W. Krzemień, R.Y. Shopa, J. Baran, A. Coussat, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, A. Gajos, B.C. Hiesmayr, K. Kacprzak, Ł. Kapłon, G. Korcyl, T. Kozik, D. Kumar, S. Niedźwiecki, S. Parzych, E. Pérez del Río, S. Sharma, S. Shivani, M. Skurzok, E.Ł. Stępień, F. Tayefi, P. Moskal
abstract
In positron emission tomography (PET) studies, convolutional neural networks (CNNs) may be applied directly to the reconstructed distribution of radioactive tracers injected into the patient's body, as a pattern recognition tool. Nonetheless, unprocessed PET coincidence data exist in tabular format. This paper develops the transformation of tabular data into -dimensional matrices, as a preparation stage for classification based on CNNs. This method explicitly introduces a nonlinear transformation at the feature engineering stage and then uses principal component analysis to create the images. We apply the proposed methodology to the classification of simulated PET coincidence events originating from NEMA IEC and anthropomorphic XCAT phantom. Comparative studies of neural network architectures, including multilayer perceptron and convolutional networks, were conducted. The developed method increased the initial number of features from 6 to 209 and gave the best precision results (79.8) for all tested neural network architectures; it also showed the smallest decrease when changing the test data to another phantom.
Detection of range shifts in proton beam therapy using the J-PET scanner: a patient simulation study
K. Brzeziński, J. Baran, D. Borys, J. Gajewski, N. Chug, A. Coussat, E. Czerwiński, M. Dadgar, K. Dulski, K.V. Eliyan, A. Gajos, K. Kacprzak, Ł. Kapłon, K. Klimaszewski, P. Konieczka, R. Kopeć, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, A.J. Lomax, K. McNamara, S. Niedźwiecki, P. Olko, D. Panek, S. Parzych, E. Perez del Rio, L. Raczyński, S. Sharma, Shivani, R.Y. Shopa, T. Skóra, M. Skurzok, P. Stasica, E.Ł. Stępień, K. Tayefi, F. Tayefi, D.C. Weber, C. Winterhalter, W. Wiślicki, P. Moskal, A. Ruciński
abstract
Objective. The Jagiellonian positron emission tomography (J-PET) technology, based on plastic scintillators, has been proposed as a cost effective tool for detecting range deviations during proton therapy. This study investigates the feasibility of using J-PET for range monitoring by means of a detailed Monte Carlo simulation study of 95 patients who underwent proton therapy at the Cyclotron Centre Bronowice (CCB) in Krakow, Poland. Approach. Discrepancies between prescribed and delivered treatments were artificially introduced in the simulations by means of shifts in patient positioning and in the Hounsfield unit to the relative proton stopping power calibration curve. A dual-layer, cylindrical J-PET geometry was simulated in an in-room monitoring scenario and a triple-layer, dual-head geometry in an in-beam protocol. The distribution of range shifts in reconstructed PET activity was visualized in the beam's eye view. Linear prediction models were constructed from all patients in the cohort, using the mean shift in reconstructed PET activity as a predictor of the mean proton range deviation. Main results. Maps of deviations in the range of reconstructed PET distributions showed agreement with those of deviations in dose range in most patients. The linear prediction model showed a good fit, with coefficient of determination r2 = 0.84 (in-room) and 0.75 (in-beam). Residual standard error was below 1 mm: 0.33 mm (in-room) and 0.23 mm (in-beam). Significance. The precision of the proposed prediction models shows the sensitivity of the proposed J-PET scanners to shifts in proton range for a wide range of clinical treatment plans. Furthermore, it motivates the use of such models as a tool for predicting proton range deviations and opens up new prospects for investigations into the use of intra-treatment PET images for predicting clinical metrics that aid in the assessment of the quality of delivered treatment.
Comparative studies of plastic scintillator strips with high technical attenuation length for the total-body J-PET scanner
Ł. Kapłon, J. Baran, N. Chug, A. Coussat, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, J. Gajewski, A. Gajos, B. Hiesmayr, E. Kavya Valsan, K. Klimaszewski, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, G. Moskal, S. Niedźwiecki, D. Panek, S. Parzych, E. Pérez del Rio, L. Raczyński, A. Ruciński, S. Sharma, S. Shivani, R. Shopa, M. Silarski, M. Skurzok, E. Stępień, F. Tayefi Ardebili, K. Tayefi Ardebili, W. Wiślicki, P. Moskal
abstract
Plastic scintillator strips are considered as one of the promising solutions for the cost-effective construction of total-body positron emission tomography, (PET) system. The purpose of the performed measurements is to compare the transparency of long plastic scintillators with dimensions 6 mm x 24 mm x 1000 mm and with all surfaces polished. Six different types of commercial, general purpose, blue-emitting plastic scintillators with low attenuation of visible light were tested, namely: polyvinyl toluene-based BC-408, EJ-200, RP-408, and polystyrene-based Epic, SP32 and UPS-923A. For determination of the best type of plastic scintillator for total-body Jagiellonian positron emission tomograph (TB-J-PET) construction, emission and transmission spectra, and technical attenuation length (TAL) of blue light-emitting by the scintillators were measured and compared. The TAL values were determined with the use of UV lamp as excitation source, and photodiode as light detector. Emission spectra of investigated scintillators have maxima in the range from 420 nm to 429 nm. The BC-408 and EJ-200 have the highest transmittance values of about 90% at the maximum emission wavelength measured through a 6 mm thick scintillator strip and the highest technical attenuation length reaching about 2000 mm, allowing assembly of long detection modules for time-of-flight (TOF) J-PET scanners. Influence of the 6 mm × 6 mm, 12 mm × 6 mm, 24 mm × 6 mm cross-sections of the 1000 mm long EJ-200 plastic scintillator on the TAL and signal intensity was measured. The highest TAL value was determined for samples with 24 mm × 6 mm cross-section.
3D melanoma spheroid model for the development of positronium biomarker
H. Karimi, P. Moskal, E.Ł. Stępień
abstract
It was recently demonstrated that newly invented positronium imaging may be used for improving cancer diagnostics by providing additional information about tissue pathology with respect to the standardized uptake value currently available in positron emission tomography (PET). Positronium imaging utilizes properties of a positronium atoms, which are built from the electron and positron produced in the body during PET examinations.
We hypothesized whether positronium imaging would be sensitive to in vitro discrimination of tumour-like three-dimensional structures (spheroids) build of melanoma cell lines with different cancer activity and biological properties.
The lifetime of ortho-Positronium (o-Ps) was evaluated in melanoma spheroids from two cell lines (WM266-4 and WM115) differing in the stage of malignancy. Additionally, we considered such parameters: as cell size, proliferation rate and malignancy to evaluate their relationship with o-Ps lifetime. We demonstrate the pilot results for the o-Ps lifetime measurement in extracellular matrix free spheroids. With the statistical significance of two standard deviations, we demonstrated that the higher the degree of malignancy and the rate of proliferation of neoplastic cells the shorter the lifetime of ortho-positronium. In particular we observed following indications encouraging further research: (i) WM266-4 spheroids characterized with higher proliferation rate and malignancy showed shorter o-Ps lifetime compared to WM115 spheroids characterized by lower growth rate, (ii) Both cell lines showed a decrease in the lifetime of o-Ps after spheroid generation in 8th day comparing to 4th day in culture and the mean o-Ps lifetime is longer for spheroids formed from WM115 cells than these from WM266-4 cells, regardless spheroid age. The results of these study revealed that positronium is a promising biomarker that may be applied in PET diagnostics for the assessment of the degree of cancer malignancy.
Colloquium: Positronium physics and biomedical applications
S.D. Bass, S. Mariazzi, P. Moskal, E. Stępień
abstract
Positronium is the simplest bound state, built of an electron and a positron. Studies of positronium in vacuum and its decays in medium tell us about quantum electrodynamics (QED) and about the structure of matter and biological processes of living organisms at the nanoscale, respectively. Spectroscopic measurements constrain our understanding of QED bound state theory. Searches for rare decays and measurements of the effect of gravitation on positronium are used to look for new physics phenomena. In biological materials positronium decays are sensitive to the intermolecular and intramolecular structure and to the metabolism of living organisms ranging from single cells to human beings. This leads to new ideas of positronium imaging in medicine using the fact that during positron emission tomography (PET) as much as 40% of positron annihilation occurs through the production of positronium atoms inside the patient?s body. A new generation of the high sensitivity and multiphoton total-body PET systems opens perspectives for clinical applications of positronium as a biomarker of tissue pathology and the degree of tissue oxidation.
Extracellular vesicles in vascular pathophysiology: beyond their molecular content
E.Ł. Stępień, M. Durak-Kozica, P. Moskal
abstract
Extracellular vesicles (EVs) are released by all cells, both in physiological and pathological conditions. Their molecular charge and composition emerge as possible biomarkers, but EVs may also be considered for other clinical applications. This review discusses the role of other features of EVs, such as their lipid components or composition of glycans that form the EV corona and regulate EV biodistribution and uptake by target cells. The importance of EV electric charge has been discussed as a new insight into EV fate and destination.
Efficiency determination of J-PET: first plastic scintillators-based PET scanner
S. Sharma, J. Baran, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, K. Eliyan, A. Gajos, N. Gupta-Sharma, B. C. Hiesmayr, K. Kacprzak, Ł. Kapłon, K. Klimaszewski, P. Konieczka, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, Sz. Niedźwiecki, D. Panek, S. Parzych, E. Perez del Rio, L. Raczyński, Shivani, R. Y. Shopa, M. Skurzok, E. Ł. Stępień, F. Tayefi, K. Tayefi , W. Wiślicki and P. Moskal
abstract
Background:
The Jagiellonian Positron Emission Tomograph is the 3-layer prototype
of the first scanner based on plastic scintillators, consisting of 192 half-metre-long strips with readouts at both ends. Compared to crystal-based detectors, plastic scintillators
are several times cheaper and could be considered as a more economical alternative to crystal scintillators in future PETs. JPET is also a first multi-photon PET prototype. For the development of multi-photon detection, with photon characterized by the continuous energy spectrum, it is important to estimate the efficiency of J-PET as a function of energy deposition. The aim of this work is to determine the registration efficiency of the J-PET tomograph as a function of energy deposition by incident photons and the intrinsic efficiency of the J-PET scanner in detecting photons of different incident energies. In this study, 3-hit events are investigated, where 2-hits are caused by 511 keV
photons emitted in e+e- annihilations, while the third hit is caused by one of the scattered photons. The scattered photon is used to accurately measure the scattering angle and thus the energy deposition. Two hits by a primary and a scattered photon are sufficient to calculate the scattering angle of a photon, while the third hit ensures
the precise labeling of the 511 keV photons.
Results:
By comparing experimental and simulated energy distribution spectra, the registration efficiency of the J-PET scanner was determined in the energy deposition range of 70-270 keV, where it varies between 20 and 100%. In addition, the intrinsic efficiency of the J-PET was also determined as a function of the energy of the incident photons.
Conclusion:
A method for determining registration efficiency as a function of energy deposition and intrinsic efficiency as a function of incident photon energy of the J-PET scanner was demonstrated. This study is crucial for evaluating the performance of the scanner based on plastic scintillators and its applications as a standard and multi-photon PET systems. The method may be also used in the calibration of Compton-cameras developed for the ion-beam therapy monitoring and simultaneous multi-radionuclide imaging in nuclear medicine.
Developing a Novel Positronium Biomarker for Cardiac Myxoma Imaging
P. Moskal, E. Kubicz, G. Grudzień, E. Czerwiński, K. Dulski, B. Leszczyński, S. Niedźwiecki, E.Ł. Stępień
abstract
Purpose: Cardiac myxoma (CM), the most common cardiac tumor in adults, accounts for 50?75% of benign cardiac tumors. The diagnosis of CM is often elusive, especially in young stroke survivors and transthoracic echocardiography (TTE) is the initial technique for the differential diagnostics of CM. Less invasive cardiac computed tomography (CT) and magnetic resonance imaging (MRI) are not available for the majority of cardiac patients. Here, a robust imaging approach, ortho-Positronium (o-Ps) imaging, is presented to determine cardiac myxoma extracted from patients undergoing urgent cardiac surgery due to unexpected atrial masses. We aimed to assess if the o-Ps atom, produced copiously in intramolecular voids during the PET imaging, serves as a biomarker for CM diagnosing.
Methods: Six perioperative CM and normal (adipose) tissue samples from patients, with primary diagnosis confirmed by the histopathology examination, were examined using positron annihilation lifetime spectroscopy (PALS) and micro-CT. Additionally, cell cultures and confocal microscopy techniques were used to picture cell morphology and origin.
Results: We observed significant shortening in the mean o-Ps lifetime in tumor with compare to normal tissues: an average value of 1.92(02) ns and 2.72(05) ns for CM and the adipose tissue, respectively. Microscopic differences between tumor samples, confirmed in histopathology examination and micro-CT, did not influenced the major positronium imaging results.
Conclusions: Our findings, combined with o-Ps lifetime analysis, revealed the novel emerging positronium imaging marker (o-PS) for cardiovascular imaging. This method opens the new perspective to facilitate the quantitative in vivo assessment of intracardiac masses on a molecular (nanoscale) level.
J-PET detection modules based on plastic scintillators for performing studies with positron and positronium beams
S. Sharma, J. Baran, R.S. Brusa, R. Caravita, N. Chug, A. Coussat, C. Curceanu, E. Czerwinski, M. Dadgar, K. Dulski, K. Eliyan, A. Gajos, B.C. Hiesmayr, K. Kacprzak, L. Kaplon, K. Klimaszewski, P. Konieczka, G. Korcyl, T. Kozik, W. Krzemien D. Kumar, S. Mariazzi, S. Niedźwiecki, L. Panasa, S. Parzych, L. Povolo, E. Perez del Rio, L. Raczynski Shivani, R.Y. Shopa, M. Skurzok, E.L. Stepien, F. Tayefi, K. Tayefi, W. Wislicki and P. Moskal
abstract
The J-PET detector, which consists of inexpensive plastic scintillators, has demonstrated its potential in the study of fundamental physics. In recent years, a prototype with 192 plastic scintillators arranged in 3 layers has been optimized for the study of positronium decays. This allows performing precision tests of discrete symmetries (C, P, T) in the decays of positronium atoms. Moreover, thanks to the possibility of measuring the polarization direction of the photon based on Compton scattering, the predicted entanglement between the linear polarization of annihilation photons in positronium decays can also be studied. Recently, a new J-PET prototype was commissioned, based on a modular design of detection units. Each module consists of 13 plastic scintillators and can be used as a stand-alone, compact and portable detection unit. In this paper, the main features of the J-PET detector, the modular prototype and their applications for possible studies with positron and positronium beams are discussed. Preliminary results of the first test experiment performed on two detection units in the continuous positron beam recently developed at the Antimatter Laboratory (AML) of Trento are also reported.
TOF MLEM Adaptation for the Total-Body J-PET with a Realistic Analytical System Response Matrix
R.Y. Shopa, J. Baran, K. Klimaszewski, W. Krzemień, L. Raczyński, W. Wiślicki, K. Brzeziński, N. Chug, A. Coussat, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, J. Gajewski, A. Gajos, B.C. Hiesmayr, E. Kavya Valsan, G. Korcyl, T. Kozik, D. Kumar, Ł. Kapłon, G. Moskal, S. Niedźwiecki, D. Panek, S. Parzych, E. Pérez del Rio, A. Ruciński, S. Sharma, Shivani, M. Silarski, M. Skurzok, E. Stepień, F. Tayefi Ardebili, K. Tayefi Ardebili, P. Moskal
abstract
We report a study of the original image reconstruction algorithm based on the time-of-flight maximum likelihood expectation maximisation (TOF MLEM), developed for the total-body (TB) Jagiellonian PET (J-PET) scanners. The method is applicable to generic cylindrical or modular multi-layer layouts and is extendable to multi-photon imaging. The system response matrix (SRM) is represented as a set of analytical functions, uniquely defined for each pair of plastic scintillator strips used for the detection. A realistic resolution model (RM) in detector space is derived from fitting the Monte Carlo simulated emissions and detections of annihilation photons on oblique transverse planes. Additional kernels embedded in SRM account for TOF, parallax effect and axial smearing. The algorithm was tested on datasets, simulated in GATE for the NEMA IEC and static XCAT phantoms inside a 24-module 2-layer TB J-PET. Compared to the reference TOF MLEM with none or a shift-invariant RM, an improvement was observed, as evaluated by the analysis of image quality, difference images and ground truth metrics. We also reconstructed the data with additive contributions, pre-filtered geometrically and with non-TOF scatter correction applied. Despite some deterioration, the obtained results still capitalise on the realistic RM with better edge preservation and superior ground truth metrics. The envisioned prospects of the TOF MLEM with analytical SRM include its application in multi-photon imaging and further upgrade to account for the non-collinearity, positron range and other factors.
Investigation of novel preclinical Total Body PET designed with J-PET technology: A simulation study
M. Dadgar, S. Parzych, F. Tayefi Ardebili, J. Baran, N. Chug, C. Curceanu, E. Czerwiński, K. Dulski, K. Eliyan, A. Gajos, B.C. Hiesmayr, K. Kacprzak, K. Klimaszewski, P. Konieczka, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, S. Niedźwiecki, D. Panek, E. Perez del Rio, L. Raczyński, S. Sharma, R.Y. Shopa, M. Skurzok, K. Tayefi Ardebili, S. Vandenberghe, W. Wiślicki, E.Ł. Stępień, P. Moskal
abstract
The growing interest in human-grade Total Body PET systems has also application in small animal research. Due to the existing limitations in human-based studies involving drug development and novel treatment monitoring, animalbased research became a necessary step for testing and protocol preparation. In this simulation-based study two unconventional, cost effective small animal Total Body PET scanners (for mouse and rat studies) have been investigated in order to inspect their feasibility for preclinical research. They were designed with the novel technology explored by the Jagiellonian PET Collaboration (J-PET). Two main PET characteristics: sensitivity and spatial resolution were mainly inspected to evaluate their performance. Moreover, the impact of the scintillator dimension and time-offlight on the latter parameter were examined in order to design the most efficient tomographs. The presented results show that for mouse TB J-PET the achievable system sensitivity is equal to 2.35% and volumetric spatial resolution to 9.46 +- 0.54 mm3, while for rat TB J-PET they are equal to 2.6% and 14.11 ? 0.80 mm3, respectively. Furthermore, it was shown that the designed tomographs are almost parallax-free systems, hence they resolve the problem of the acceptance criterion trade-off between enhancing spatial resolution and reducing sensitivity.
Experience and new prospects of PET imaging for ion beam therapy monitoring
K. Parodi, T. Yamaya, P. Moskal
abstract
Pioneering investigations on the usage of positron-emission-tomography (PET) for the monitoring of ion beam therapy with light (protons, helium) and heavier (stable and radioactive neon, carbon and oxygen) ions started shortly after the first realization of planar and tomographic imaging systems, which were able to visualize the annihilation of positrons resulting from irradiation induced or implanted positron emitting nuclei. And while the first clinical experience was challenged by the utilization of instrumentation directly adapted from nuclear medicine applications, new detectors optimized for this unconventional application of PET imaging are currently entering the phase of (pre)clinical testing for more reliable monitoring of treatment delivery during irradiation. Moreover, recent advances in detector technologies and beam production open several new exciting opportunities which will not only improve the performance of PET imaging under the challenging conditions of in-beam applications in ion beam therapy, but will also likely expand its field of application. In particular, the combination of PET and Compton imaging can enable the most efficient utilization of all possible radiative emissions for both stable and radioactive ion beams, while positronium lifetime imaging may enable probing new features of the underlying tumour and normal tissue environment. Thereby, PET imaging will not only provide means for volumetric reconstruction of the delivered treatment and in-vivo verification of the beam range, but can also shed new insights for biological optimization of the treatment or treatment response assessment.
A modular data acquisition system for reconstruction of radiation dose spatial distribution in radiotherapy treatment planning
P. Jurgielewicz, M. Filipek, T. Fiutowski, D. Kabat, K. Kalecińska, Ł. Kapłon, M. Kopeć, S. Koperny, D. Kulig, J. Moroń, G. Moskal, A. Ruciński, P. Wiącek, T. Szumlak, B. Mindur
abstract
In this work we propose the complete Data Acquisition (DAQ) system for measurement of volumetric radiotherapeutic dose deposition in tissue-like phantoms based on 3D printed plastic scintillators. The DAQ is easily extensible thanks to the modular architecture of its hardware and software components. We show results from the full measurement chain indicating proper operation of the system.
A reconfigurable detector for measuring the spatial distribution of radiation dose for applications in the preparation of individual patient treatment plans
M. Kopeć, T. Fiutowski, P. Jurgielewicz, D. Kabat, K. Kalecińska, Ł. Kapłon, S. Koperny, D. Kulig, J. Moroń, G. Moskal, A. Ruciński, P. Wiącek, T. Szumlak, B. Mindur
abstract
In this work, a novel reconfigurable Dose-3D detector intended for a full spatial therapeutic dose measurement to improve radiotherapy treatment planning is presented. The device is composed of a reconfigurable detection phantom allowing patient-centric adjustments to its geometry, a scalable data acquisition system (including hardware, firmware, and low-level software) designed to change with the phantom?s configuration seamlessly, and a high-level software package for tumour geometry extraction based on computer tomography scans. Extracted geometry will be used in the Monte Carlo simulations and the configuration of the phantom. Each of the components to be used in the measurement system has been assessed obtaining the following results. The scintillating voxels? light output is sufficient. The data acquisition system with its hardware and software has been tested using artificial testing signals and laser light proving a reliable and robust means of physics data reconstruction.
Medical imaging data analysis using 3D deep learning models towards improving the individual treatment plans
K. Kalecińska, T. Fiutowski, P. Jurgielewicz, D. Kabat, B. Rachwał, Ł. Kapłon, M. Kopeć, S. Koperny, D. Kulig, J. Moroń, G. Moskal, A. Ruciński, P. Wiącek, B. Mindur, T. Szumlak
abstract
This work is a part of a research project aiming at delivering the next generation active medical phantom, Dose-3D, with high spatial granulation for quasi-real time measurement of the volumetric radiotherapeutic dose deposited during photon therapy. The preliminary results, discussed here, pertain to the intelligent medical data augmentation using Generative Adversarial Networks (GANs) technique implemented inside MONAI framework. However, in the scope of the project, we perform a broad search for the most efficient and advanced Deep Learning (DL) models to create tools for 3D Computed Tomography (CT) images segmentation and cancer diagnosis improvement that will be an integral part of the custom designed software platform for processing data collected with Dose-3D phantom. Apart from the innovative detection system the software itself may prove to be disruptive in the context of the currently available tools by offering open-source high quality toolkit for wide use in everyday clinical applications.
Transcriptomic data analysis of melanocytes and melanoma cell lines of LAT transporter genes for precise medicine
M. Szczepanek, D. Panek, M. Przybyło, P. Moskal, E. Stępień
abstract
Background: Boron Neutron Capture Therapy (BNCT) is a two-step treatment that can be used in some types of cancers. It involves administering a compound containing boron atoms to the patient and irradiating the affected area of the body with a neutron beam. The success of the therapy depends mainly on the delivery of the boron isotope (10B) to the tumor using an appropriate boron carrier. One of the boron carriers used is boronophenylalanine (BPA). Therefore, in research on the use of boron carriers, it is also important to know the mechanisms of its uptake by cells. Aim: To study the expression of LAT family genes in two melanoma (high melanotic WM115 and low melanotic WM266-4) cell lines and melanocytes (HEMa-Lp) which are responsible for the transport the BPA into cells. Methods: To normalize data from the transcriptomic analysis, the ratio of the median method was used. This allowed the samples to be compared with each other. Comparison metrics included log-fold change (LFC) values. The heatmap of LFC values and the cluster map were created. These graphs show the similarities and differences between the samples. Results: Transcriptomic data show that in melanocytes, LFC for SLC7A5 (LAT1) and SLC3A2 (4Fhc) was higher than in melanoma cell lines, which corresponded with their melanin content. Conclusion: Our results indicate overexpression of BPA transporter genes in normal cells (melanocytes), which may suggest the highest level of these proteins in melanocytes compared to less melanotic melanoma. Therefore, for BNCT, the use of BPA as the 10B carrier will require additional qualifying tests of amino acid transporter expression for patients and specific tumors to develop a personalized BNCT.
Feasibility study of positronium application for blood clots structural characteristics
S. Moyo, P. Moskal, E. Stępień
abstract
Positron-electron annihilation in living organisms occurs in about 30% via the formation of a metastable ortho-positronium atom that annihilates into two 511 keV photons in tissues because of the pick-off and conversion processes. Positronium (Ps) annihilation lifetime and intensities can be used to determine the size and quantity of defects in a material's microstructure, such as voids or pores in the range of nanometers. This is particularly true for blood clots. Here we present pilot investigations of positronium properties in fibrin clots. The studies are complemented by the use of SEM Edax and micro-computed tomography (microCT) to evaluate the extracted thrombotic material's properties. microCT is a versatile characterization method offering in situ and in operando possibilities and is a qualitative diagnostic tool. With microCT the presence of pores, cracks, and structural errors can be verified, and hence the 3D inner structure of samples can be investigated.
Multi-photon time-of-flight MLEM application for the positronium imaging in J-PET
R. Shopa, K. Dulski
abstract
We develop a positronium imaging method for the Jagiellonian PET (J-PET) scanners based on the time-of-flight maximum likelihood expectation maximisation (TOF MLEM). The system matrix elements are calculated on-the-fly for the coincidences comprising two annihilation and one de-excitation photons that originate from the ortho-positronium (o-Ps) decay. Using the Geant4 library, a Monte Carlo simulation was conducted for four cylindrical 22Na sources of ?+ decay with diverse o-Ps mean lifetimes, placed symmetrically inside the two JPET prototypes. The estimated time differences between the annihilation and the positron emission were aggregated into histograms (one per voxel), updated by the weights of the activities reconstructed by TOF MLEM. The simulations were restricted to include only the o-Ps decays into back-to-back photons, allowing a linear fitting model to be employed for the estimation of the mean lifetime from each histogram built in the log scale. To suppress the noise, the exclusion of voxels with activity below 2% ? 10% of the peak was studied. The estimated o-Ps mean lifetimes were consistent with the simulation and distributed quasi-uniformly at high MLEM iterations. The proposed positronium imaging technique can be further upgraded to include various correction factors, as well as be modified according to realistic o-Ps decay models.
ProTheRaMon - a GATE simulation framework for proton therapy range monitoring using PET imaging
D. Borys, J. Baran, K.W. Brzezinski, J. Gajewski, N. Chug, A. Coussat, E. Czerwiński, M. Dadgar, K. Dulski, K. Valsan Eliyan, A. Gajos, K. Kacprzak, Ł. Kapłon, K. Klimaszewski, P. Konieczka, R. Kopec, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, A. John Lomax, K. McNamara, S. Niedźwiecki, P. Olko, D. Panek, S. Parzych, E. Pérez del Río, L. Raczyński, S. Sharma, S. Shivani, R.Y. Shopa, T. Skóra, M. Skurzok, P. Stasica, E. Stępień, K. Tayefi Ardebili, F. Tayefi, D. Charles Weber, C. Winterhalter, W. Wiślicki, P. Moskal, A. Rucinski
abstract
Objective: This paper reports on the implementation and shows examples of the use of the ProTheRaMon framework for simulating the delivery of proton therapy treatment plans and range monitoring using positron emission tomography (PET). ProTheRaMon offers complete processing of proton therapy treatment plans, patient CT geometries, and intra-treatment PET imaging, taking into account therapy and imaging coordinate systems and activity decay during the PET imaging protocol specific to a given proton therapy facility. We present the ProTheRaMon framework and illustrate its potential use case and data processing steps for a patient treated at the Cyclotron Centre Bronowice (CCB) proton therapy center in Krakow, Poland. Approach: The ProTheRaMon framework is based on GATE Monte Carlo software, the CASToR reconstruction package and in-house developed Python and bash scripts. The framework consists of five separated simulation and data processing steps, that can be further optimized according to the user's needs and specific settings of a given proton therapy facility and PET scanner design. Main results: ProTheRaMon is presented using example data from a patient treated at CCB and the J-PET scanner to demonstrate the application of the framework for proton therapy range monitoring. The output of each simulation and data processing stage is described and visualized. Significance: We demonstrate that the ProTheRaMon simulation platform is a high-performance tool, capable of running on a computational cluster and suitable for multi-parameter studies, with databases consisting of large number of patients, as well as different PET scanner geometries and settings for range monitoring in a clinical environment. Due to its modular structure, the ProTheRaMon framework can be adjusted for different proton therapy centers and/or different PET detector geometries. It is available to the community via github.
Investigation of the light output of 3D-printed plastic scintillators for dosimetry applications
Ł. Kapłon, D. Kulig, S. Beddar, T. Fiutowski, W. Górska, J. Hajduga, P. Jurgielewicz, D. Kabat, K. Kalecińska, M. Kopeć, S. Koperny, B. Mindur, J. Moroń, G. Moskal, S. Niedźwiecki, M. Silarski, F. Sobczuk, T. Szumlak, A. Ruciński
abstract
Three-dimensional (3D) printing, specifically digital light processing (DLP) technique, can be used to manufacture plastic scintillators of any shape. The purpose of this study was to determine the light output of DLP 3Dprinted scintillators for dosimetry applications. Two types of plastic scintillators with dimensions 10 mm × 10 mm × 10 mm were fabricated using DLP 3D-printing at Hanyang University, South Korea. The light output of these DLP 3D-printed samples was measured and compared to that of a commercial plastic scintillator of the same dimensions, RP-408, produced by casting. The 3D-printed scintillators emitting violet and blue light had a lower relative light output by 49% and 43%, respectively, compared to the RP-408 reference scintillator. We also investigated three types of scintillator surface finishing methods: the original surface made by the 3D printer, a sanded surface, and a polished surface. Furthermore, three wrapping configurations were tested: bare scintillator, diffuse-type polytetrafluoroethylene tape, and specular-type enhanced specular reflector foil. Both reflector types, diffuse and specular, reflected blue light with comparable efficiency. Additionally, emission and transmission spectra of the samples were measured. Emission maxima were located at 430 nm for RP-408, and 438 and 475 nm for two 3D-printed samples. Transmittance at the wavelength of maximum emission was equal to 89% for RP-408, and 73% and 66% for the two DLP-printed samples. Although the light output of the 3D-printed scintillators was about 50% lower than that of the commercial plastic scintillator, due to characteristics of 3Dprinted plastic scintillators, i.e. fast, low-cost production, and easy customization of the printed shape, they are promising as an active part of dosimeters for use in high intensity gamma radiation fields produced by medical linear accelerators with acceptable signal-to-noise ratio level.
Radiovesicolomics - new approach in medical imaging
E.Ł. Stępień, C. Rząca, P. Moskal
abstract
This review introduce extracellular vesicles (EVs) to a molecular imaging field. The idea of modern analyses based on the use of omics studies, using highthroughput methods to characterize the molecular content of a single biological system, vesicolomics seems to be the new approach to collect molecular data about EV content, to find novel biomarkers or therapeutic targets. The use of various imaging techniques, including those based on radionuclides as positron emission tomography (PET) or single photon
emission computed tomography (SPECT), combining molecular data on EVs, opens up the new space for radiovesicolomics?a new approach to be used in theranostics.
Study of the influence of hyperglycemia on the abundance of amino acids, fatty acids, and selected lipids in extracellular vesicles using TOF-SIMS
M. E. Marzec, C. Rząca, P. Moskal, E. Ł. Stępień
abstract
Time-of-flight secondary ion mass spectrometry (TOF-SIMS) with the Bi3+ liquid metal ion gun was used to investigate the content of lipids and amino acids (AAs) in extracellular vesicles (EVs). We induced metabolic changes in human pancreatic beta-cells by stimulation with high glucose concentrations (35 mM) and tested the hypothesis of hyperglycemia (HG) has a detrimental effect on lipids and AAs in released EV subpopulations: ectosomes and exosomes. As a result of HG treatment, selected fatty acids (FAs) such as arachidonic, myristic and palmitic acids, changed their abundance in ectosomes and exosomes. Also, intensities of the characteristic peaks for cholesterol (m/z 95.09; 147.07; 161.11; 369.45) along with the molecular ion m/z 386.37 [C27H46O+] under HG conditions, both for ectosomes and exosomes, have changed significantly. Comparative analysis of HG EVs and normoglycemic (NG) ones showed statistically significant differences in the signal intensities of four AAs: valine (m/z 72.08 and 83.05), isoleucine (m/z 86.10), phenylalanine (m/z 120.08 and 132.05) and tyrosine (m/z 107.05 and 136.09). We confirmed that ToF-SIMS is a useful technique to study selected AAs and lipid profiles in various EV subpopulations. Our study is the first demonstration of changes in FAs and AAs in exosomes and ectosomes derived from ?-cells under the influence of HG.
Perspectives on translation of positronium imaging into clinics
P. Moskal, E.Ł. Stępień
abstract
The image of positronium properties created in the patient?s body during PET examination tells about the inter- and intra-molecular structure of the tissue and the concentration of bio-active molecules in the tissue [2?4]. In this article, we advocate the opinion that total-body PET systems, thanks to their high imaging sensitivity and high time resolution, open up the prospect of translating
positronium imaging into clinics.
Decoherence Puzzle in Measurements of Photons Originating from Electron-Positron Annihilation
S. Sharma, D. Kumar, P. Moskal
abstract
The entanglement of photons originating from electron-positron annihilation has not been experimentally proven. owever, the independent experiments performed so far unanimously confirm that the correlation between the linear polarizations of back-to-back photons from electron?positron annihilation is
consistent with the assumption that these photons are entangled in the polarization. Yet, unexpectedly,
recent experiments differ as regards the correlation of polarization direction of back-to-back photons
after the decoherence induced by the scattering of one of these photons on the electron in the scattering
material. In one of the experiments, the correlation before and after the decoherence of the photon state
is the same, and in the other experiment, the scattering of one photon leads to a significant decrease
in this correlation. Here we discuss this puzzle. Decoherent states were ensured provided by forcing
one of the annihilation photons to scatter earlier before measuring the polarization correlation based
on Compton kinematics. The comparison is made between the experimental setups used for the different measurements, and the results obtained are briefly discussed, highlighting the parameters that are
important in performing such measurements. Finally, the main features of the J-PET detector are presented, along with the schemes for performing similar studies, so that the conclusive results can be used
as remarks to solve the puzzle in question. Solving the decoherence puzzle will have crucial consequences
for basic studies of entanglement, as well as for the proposed application of the photon polarization in
positron emission tomography. If the correlation of the polarization of back-to-back photons from the
electron?positron annihilation is the same before and after the scattering of these photons, then it will
not be useful for the reduction of scatter fraction in positron emission tomography diagnostics.
Mirror Matter Searches with the J-PET Detector
E. Pérez del Río, W. Krzemień, B. Kłósek
abstract
The positronium system ? a bound state of an electron and a positron ? is suitable for testing the
predictions of quantum electrodynamics, since its properties can be perturbatively calculated to high
accuracy and, unlike the hydrogen system, it is not affected by the finite size or quantum chromodynamics effects at the current level of experimental precision. Experiments searching for invisible decays
of the positronium triplet state ? the ortho-positronium ? which mainly decays to three photons, are
being conducted since they are sensitive to new physics scenarios, e.g., mirror matter, milli-charged
particles, and extra space-time dimensions. The particular case of mirror matter and its search with
the novel total-body positron emission tomography scanner at the Jagiellonian University is presented.
This J-PET is a large, high precision medical imaging tool based on plastic scintillators.
Development of the Normalization Method for the Jagiellonian PET Scanner
A. Coussat, W. Krzemien, J. Baran, S. Parzych
abstract
This work aims at applying the theory of the component-based normalization to the Jagiellonian PET
scanner, currently under development at the Jagiellonian University. In any positron emission tomography acquisition, efficiency along a line-of-response can vary due to several physical and geometrical
effects, leading to severe artifacts in the reconstructed image. To mitigate these effects, a normalization
coefficient is applied to each line-of-response, defined as the product of several components. The specificity of the Jagiellonian PET scanner geometry is taken into account. The results obtained from the
GATE simulations are compared with the preliminary results obtained from the experimental data.
Positronium as a biomarker of hypoxia
P. Moskal and E.Ł. Stępień
abstract
In this review article, we present arguments demonstrating that the advent of high sensitivity total-body PET systems and the invention of the method of positronium imaging, open realistic perspectives for the application of positronium as a biomarker forin-vivo assessment of the degree of hypoxia. Hypoxia is a state or condition, in which the availability of oxygen is not sufficient to support physiological processes in tissue and organs. Positronium is a meta-stable atom formed from electron and positron which is copiously produced in the intramolecular spaces in the living organisms undergoing positron emission tomography (PET). Properties of positronium, such as e.g., lifetime, depend on the size of intramolecular spaces and the concentration in them of oxygen molecules. Therefore, information on the partial pressure of oxygen (pO2) in the tissue may be derived from the positronium lifetime measurement. The partial pressure of oxygen differs between healthy and cancer tissues in the range from 10 to 50 mmHg. Such differences of pO2 result in the change of ortho-positronium lifetime e.g., in water by about 2?7 ps. Thus, the application of positronium as a biomarker of hypoxia requires the determination of the mean positronium lifetime with the resolution in the order of2 ps. We argue that such resolution is in principle achievable for organ-wise positronium imaging with the total-body PET systems.
New trends in theranostics
P. Moskal, E.Ł. Stępień
abstract
Novel biomarker and drug delivery systems for theranostics-extracellular vesicles
E.Ł. Stępień, C. Rząca, P. Moskal
abstract
Extracellular vesicles (EVs) are nano- and micro-sized double-layered membrane entities derivedfrom most cell types and released into biological fluids. Biological properties (cell-uptake, biocompatibility), and chemical (composition, structure) or physical (size, density) characteristics make EVs a good candidate for drug delivery systems (DDS). Recent advances in the field of EVs (e.g., scaling-up production, purification) and developments of new imaging methods (total-body positron emission tomography [PET]) revealed benefits ofradio labeled EVs in diagnostic and interventional medicine as a potential DDs in theranostics.
Unparalleled and revolutionary impact of PET imaging on research and day to day practice of medicine
A. Alavi, T.J. Werner, E.Ł. Stępień, P. Moskal
abstract
Positron emission tomography (PET) imaging is the most quantitative modality for assessing diseaseactivity at the molecular and cellular levels, and therefore, it allows monitoring its course and determining the efficacy of various therapeutic interventions. In this scientific communication, we describe the unparalleled and revolutionary impact of PET imaging on researchand day to day practice of medicine. We emphasize thecritical importance of the development and synthesis of novel radiotracers (starting from the enormous impactof F-Fluorodeouxyglucose (FDG) introduced by investigators at the University of Pennsylvania (PENN)) and PET instrumentation. These innovations have led to the total-body PET systems enabling dynamic and parametric molecular imaging of all organs in the body simultaneously. We also present our perspectives for future development of molecular imaging by multiphoton PET systems that will enable users to extract substantial information (owing to the evolving role of positronium imaging) about the related molecular and biological bases of various disorders, which are unachievable by the current PET imaging techniques.
Positronium imaging with the novel multiphoton PET scanner
P. Moskal, K. Dulski, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, J. Gajewski, A. Gajos, G. Grudzień, B.C. Hiesmayr, K. Kacprzak, Ł. Kapłon, H. Karimi, K. Klimaszewski, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, P. Małczak, S. Niedźwiecki, M. Pawlik-Niedźwiecka, M. Pędziwiatr, L. Raczyński, J. Raj, A. Ruciński, S. Sharma, Shivani, R.Y. Shopa, M. Silarski, M. Skurzok, E.Ł. Stępień, M. Szczepanek, F. Tayefi, W. Wiślicki
abstract
In vivo assessment of cancer and precise location of altered tissues at initial stages of molecular disorders are important diagnostic challenges. Positronium is copiously formed in the free molecular spaces in the patient?s body during positron emission tomography (PET). The positronium properties vary according to the size of inter- and intramolecular voids and the concentration of molecules in them such as, e.g., molecular oxygen, O2; therefore, positronium imaging may provide information about disease progression during the initial stages of molecular alterations. Current PET systems do not allow acquisition of positronium images. This study presents a new method that enables positronium imaging by simultaneous registration of annihilation photons and deexcitation photons from pharmaceuticals labeled with radionuclides. The first positronium imaging of a phantom built from cardiac myxoma and adipose tissue is demonstrated. It is anticipated that positronium imaging will substantially
enhance the specificity of PET diagnostics.
Optimisation of the event-based TOF filtered back-projection for online imaging in total-body J-PET
R.Y. Shopa, K. Klimaszewski, P. Kopka, P. Kowalski, W. Krzemień, L. Raczyński, W. Wiślicki, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, A. Gajos, B.C. Hiesmayr, K. Kacprzak, Ł. Kapłon, D. Kisielewska, G. Korcyl, N. Krawczyk, E. Kubicz, Sz. Niedźwiecki, J. Raj, S. Sharma, Shivani, E.Ł. Stępień, F. Tayefi, P. Moskal
abstract
We perform a parametric study of the newly developed time-of-flight (TOF) image reconstruction algorithm, proposed for the real-time imaging in total-body Jagiellonian PET (J-PET) scanners. The asymmetric 3D filtering kernel is applied at each most likely position of electron-positron annihilation, estimated from the emissions of back-to-back gamma-photons. The optimisation of its parameters is studied using Monte Carlo simulations of a 1-mm spherical source, NEMA IEC and XCAT phantoms inside the ideal J-PET scan- ner. The combination of high-pass filters which included the TOF filtered back-projection (FBP), resulted in spatial resolution, 1.5 times higher in the axial direction than for the conventional 3D FBP. For real- istic 10-minute scans of NEMA IEC and XCAT, which require a trade-offbetween the noise and spatial resolution, the need for Gaussian TOF kernel components, coupled with median post-filtering, is demon- strated. The best sets of 3D filter parameters were obtained by the Nelder-Mead minimisation of the mean squared error between the resulting and reference images. The approach allows training the recon- struction algorithm for custom scans, using the IEC phantom, when the temporal resolution is below 50 ps. The image quality parameters, estimated for the best outcomes, were systematically better than for the non-TOF FBP.
Testing CPT symmetry in ortho-positronium decays with positronium annihilation tomography
P. Moskal, A. Gajos, M. Mohammed, J. Chhokar, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, M. Gorgol, J. Goworek, B. Hiesmayr, B. Jasińska, K. Kacprzak, Ł. Kapłon, H. Karimi, D. Kisielewska, K. Klimaszewski, G. Korcyl, P. Kowalski, N. Krawczyk, W. Krzemień, T. Kozik, E. Kubicz, S. Niedźwiecki, S. Parzych, M. Pawlik-Niedźwiecka, L. Raczyński, J. Raj, S. Sharma, S. Choudhary, R. Shopa, A. Sienkiewicz, M. Silarski, M. Skurzok, E. Stepien, F. Tayefi, W. Wiślicki
abstract
Charged lepton system symmetry under combined charge, parity, and time-reversal transformation (CPT) remain scarcely tested. Despite stringent quantum-electrodynamic limits, discrepancies in predictions for the electron-positron bound state (positronium atom) motivate further investigation, including fundamental symmetry tests. While CPT noninvariance effects could be manifested in non-vanishing angular correlations between final-state photons and spin of annihilating positronium, measurements were previously limited by the knowledge of the latter. Here, we demonstrate tomographic reconstruction techniques applied to three-photon annihilations of ortho-positronium atoms to estimate their spin polarisation without a magnetic field or polarised positronium source. We use a plastic-scintillator-based positron-emission-tomography scanner to record ortho-positronium (o-Ps) annihilations with a single-event estimation of o-Ps spin and determine the complete spectrum of an angular correlation operator sensitive to CPT-violating effects. We find no violation at the precision level of 10^{-4}, with an over threefold improvement on the previous measurement.
Blue-emitting polystyrene scintillators for plastic scintillation dosimetry
Ł. Kapłon, G. Moskal
abstract
Objectives: Purpose of this research was to find the best blue-emitting fluorescent substance for plastic scintillator used for gamma radiation dosimetry. Scintillator should convert gamma radiation into blue light with high efficiency.
Methods: Plastic scintillators with fixed concentration of various fluorescent additives, called wavelength shifters, absorbing ultraviolet light and emitting blue light were manufactured by radical bulk polymerization of styrene. Light output were measured and compared to the light output of commercial plastic scintillator.
Results: Performed measurements of charge Compton spectra confirmed usefulness of majority of researched substances as wavelength shifters in plastic scintillators with emission maximum at blue range of visible light.
Conclusions: Plastic scintillation dosimeter may be constructed from manufactured polystyrene-based scintillators. Performance of synthesized scintillators is close to commercial polystyrene scintillators.
Simulating NEMA characteristics of the modular total-body J-PET scanner - an economic total-body PET from plastic scintillators
P. Moskal, P. Kowalski, R.Y. Shopa, L. Raczyński, J. Baran, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, A. Gajos, B.C. Hiesmayr, K. Kacprzak, Ł. Kapłon, D. Kisielewska, K. Klimaszewski, P. Kopka, G. Korcyl, N. Krawczyk, W. Krzemień, E. Kubicz, Sz. Niedźwiecki, Sz. Parzych, J. Raj, S. Sharma, S. Shivani, E. Stępień, F. Tayefi, W. Wiślicki
abstract
The purpose of the presented research is the estimation of the performance characteristics of the economic total-body Jagiellonian-PET system (TB-J-PET) constructed from plastic scintillators. The characteristics are estimated according to the NEMANU-2-2018 standards utilizing the GATE package. The simulated detector consists of 24 modules, each built out of 32 plastic scintillator strips
(each with a cross-section of 6 mm times 30 mm and length of 140 or 200 cm) arranged in two layers in regular 24-sided polygon circumscribing a circle with a diameter of 78.6 cm. For the TB-J-PET with an axial field-of-view (AFOV) of 200 cm, a spatial resolution (SRs) of 3.7mm (transversal) and 4.9mm (axial) are achieved. The noise equivalent count rate (NECR) peak of 630 kcps is expected at 30 kBq cc^-1. Activity concentration and the sensitivity at the center amount to 38 cps kBq^-1. The scatter fraction (SF) is estimated to 36.2 %. The values of SF and SR are comparable to those obtained for the state-of-the-art clinical PET scanners and the first total-body tomographs: uExplorer and PennPET.With respect to the standard PET systemswithAFOVin the range from16 to 26 cm, the TBJ-PET is characterized by an increase inNECRapproximately by a factor of 4 and by the increase of the whole-body sensitivity by a factor of 12.6 to 38. The time-of-flight resolution for the TB-J-PETis expected to be at the level ofCRT=240 ps fullwidth at half-maximum. For the TB-J-PETwith an AFOVof 140 cm, an image quality of the reconstructed images of a NEMAIEC phantom was presented with a contrast recovery coefficient and a background variability parameters. The increase of the whole-body sensitivity andNECRestimated for the TB-J-PET with respect to current commercial PETsystems makes the TB-J-PET a promising cost-effective solution for the broad clinical applications of total-body PET scanners. TB-J-PETmay constitutes an economic alternative for the crystal TB-PET scanners, since plastic scintillators are much cheaper than BGO or LYSO crystals and the axial arrangement of the strips significantly reduces the costs of readout electronics and SiPMs.
The J-PET detector - a tool for precision studies of ortho-positronium decays
K. Dulski, S.D. Bass, J. Chhokar, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, J. Gajewski, A. Gajos, M. Gorgol, R. Del Grande, B.C. Hiesmayr, B. Jasińska, K. Kacprzak, Ł. Kapłon, H. Karimi, D. Kisielewska, K. Klimaszewski, P. Kopka, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, P. Małczak, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, M. Pędziwiatr, L. Raczyński7, J. Raj, A. Ruciński, S. Sharma, Shivani, R.Y. Shopa, M. Silarski, M. Skurzok, E. Ł. Stępień, F. Tayefi, W. Wiślicki, B. Zgardzińska, P. Moskal
abstract
The J-PET tomograph is constructed from plastic scintillator strips arranged axially in concentric cylindrical layers. It enables investigations of positronium decays by measurement of the time, position, polarization and energy deposited by photons in the scintillators, in contrast to studies conducted so far with crystal and semiconductor based detection systems where the key selection of events is based on the measurement of the photons energies. In this article we show that the J-PET tomography system constructed solely from plastic scintillator detectors is capable of exclusive measurements of the decays of ortho-positronium atoms. We present the first positronium production results and its lifetime distribution measurements. The obtained results prove the capability of the J-PET tomograph for (i) fundamental studies of positronium decays (in particular test of discrete symmetries in purely leptonic systems), (ii) positron annihilation lifetime spectroscopy, as well as (iii) molecular imaging diagnostics and (iv) observation of entanglement
A Simulation Study to Estimate Optimum LOR Angular Acceptance for the Image Reconstruction with the Total-Body J-PET
M. Dadgar, S. Parzych and F. Tayefi Ardebili
abstract
One of the directions in today's development of PET scanners is to increase their axial field of view (AFOV). Currently limited to several centimeters, AFOV of the clinically available PET tomographs results in a very low sensitivity (~1%) and requires an extended time for a scan of a whole human body. While these drawbacks are addressed in the so-called, Total Body PET concept (scanner with a significantly elongated field of view), it creates new challenges not only in the mechanical construction but also in image reconstruction and event selection. The possibility of taking into account of large-angle variety of lines of responses (LORs) contributes positively to the sensitivity of the tomograph. However, at the same time, the most oblique LORs have an unfavorable influence on the spatial resolution due to the parallax error and large contribution to the scatter fraction. This forces to determine a new factor -acceptance angle - which is a maximum azimuthal angle for which the LORs are still taken into image reconstruction. Correct determination of such factors is imperative to maximize the performance of a Total Body PET system since it introduces a trade-off between the two main characteristics of scanners: sensitivity and spatial resolution.
This work has been dedicated to the estimation of the optimal acceptance angle for the proposed by the Jagiellonian PET (J-PET) Collaboration Total Body tomograph. J-PET Collaboration introduces a novel, cost-effective approach to PET systems development with the use of organic scintillators. This simulation study provides evidence that the 45-degree acceptance angle cut can be an appropriate choice for the investigated scanner.
Advanced Monte Carlo simulations of emission tomography imaging systems with GATE
D. Sarrut, M. Bała, M. Bardies, J. Bert, M. Chauvin, K. Chatzipapas, M. Dupont, A. Etxebeste, L.M. Fanchon, S. Jan, G. Kayal, A.S. Kirov, P. Kowalski, W. Krzemien, J. Labour, M. Lenz, G. Loudos, B. Mehadji, L. Ménard, C. Morel, P. Papadimitroulas, M. Rafecas, J. Salvadori, D. Seiter, M. Stockhoff, E. Testa, C. Trigila, U. Pietrzyk, S. Vandenberghe, M.A. Verdier, D. Visvikis, K. Ziemons, M. Zvolský, E. Roncali
abstract
Built on top of the Geant4 toolkit, GATE is collaboratively developed for more than 15 years to design Monte Carlo simulations of nuclear-based imaging systems. It is, in particular, used by researchers and industrials to design, optimize, understand and create innovative emission tomography systems. In this paper, we reviewed the recent developments that have been proposed to simulate modern detectors and provide a comprehensive report on imaging systems that have been simulated and evaluated in GATE. Additionally, some methodological developments that are not specific for imaging but that can improve detector modeling and provide computation time gains, such as Variance Reduction Techniques and Artificial Intelligence integration, are described and discussed.
3D TOF-PET image reconstruction using total variation regularization
L. Raczyński, W. Wiślicki, K. Klimaszewski, W. Krzemień, P. Kopka, P. Kowalski, R. Y. Shopa, M. Bała, J. Chhokar, C. Curceanu, E. Czerwinski, K. Dulski, J. Gajewski, A. Gajos, M. Gorgol, R. Del Grande, B. Hiesmayr, B. Jasińska, K. Kacprzak, L. Kapłon, D. Kisielewska, G. Korcyl, T. Kozik, N. Krawczyk, E. Kubicz, M. Mohammed, S. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, J. Raj, K. Rakoczy, A. Ruciński, S. Sharma, S. Shivani, M. Silarski, M. Skurzok, E.Ł. Stepień, B. Zgardzińska, P. Moskal
abstract
In this paper we introduce a semi-analytic algorithm for 3-dimensional image reconstruction for positron emission tomography (PET). The method consists of the back-projection of the acquired data into the most likely image voxel according to time-of-flight (TOF) information, followed by the filtering step in the image space using an iterative optimization algorithm with a total variation (TV) regularization. TV regularization in image space is more computationally efficient than usual iterative optimization methods for PET reconstruction with a full system matrix that uses TV regularization. The efficiency comes from the one-time TOF back-projection step that might also be described as a reformatting of the acquired data. An important aspect of our work concerns the evaluation of the filter operator of the linear transform mapping an original radioactive tracer distribution into the TOF back-projected image. We obtain concise, closed-form analytical formula for the filter operator. The proposed method is validated with the Monte Carlo simulations of the NEMA IEC phantom using a one-layer, 50 cm-long cylindrical device called Jagiellonian PET scanner. The results show a better image quality compared with the reference TOF maximum likelihood expectation maximization algorithm.
A simple approach for experimental characterization and validation of proton pencil beam profiles
P. Stasica, J. Baran, C. Granja, N. Krah, G. Korcyl, C. Oancea, M. Pawlik-Niedźwiecka, Sz. Niedźwiecki, M. Rydygier, A. Schavi, A. Rucinski, J. Gajewski
abstract
A precise characterization of therapeutic proton pencil beams is essential for commissioning of any treatment planning system (TPS). The dose profile characterization includes measurement of the beam lateral dose profile in the beam core and far from the beam core, in the so called low-dose envelope, and requires a sophisticated detection system with a few orders of magnitude dynamic range. We propose to use a single-quantum sensitive MINIPIX TIMEPIX detector, along with an in-house designed holder to perform measurements of the pencil beam dose profile in air and in water. We validated the manufacturer calibration of the MINIPIX TIMEPIX detector in proton beams of various energies and compared the deposited energy spectra to Monte Carlo (MC) simulations. The precision of the lateral dose profile measurements has been systematically validated against Krakow proton facility commissioning data and dose profile simulations performed with MC codes GATE/Geant4 and FRED. We obtained an excellent agreement between MINIPIX TIMEPIX measurements and simulations demonstrating the feasibility of the system for a simple characterization and validation of proton pencil beams. The proposed approach can be implemented at any proton therapy facility to acquire experimental data needed to commission and validate analytical and MC based TPS.
Synchronisation and calibration of the 24-modules J-PET prototype with 300 mm axial field of view
P. Moskal, T. Bednarski, Sz. Niedźwiecki, M. Silarski, E. Czerwiński, T. Kozik, J. Chhokar, M. Bała, C. Curceanu, R. Del Grande, M. Dadgar, K. Dulski, A. Gajos, M. Gorgol, N. Gupta-Sharma, B. C. Hiesmayr, B. Jasińska, K. Kacprzak, Ł. Kapłon, H. Karimi, D. Kisielewska, K.Klimaszewski, G. Korcyl, P. Kowalski, N. Krawczyk, W. Krzemień, E. Kubicz, M. Mohammed, M. Pawlik-Niedźwiecka, L. Raczyński, S. Sharma, Shivani, R. Y. Shopa, M. Skurzok, E. Stępień, W. Wiślicki, B. Zgardzińska
abstract
Research conducted in the framework of the J-PET project aims to develop a cost-effective total-body positron emission tomography scanner. As a first step on the way to construct a full-scale J-PET tomograph from long strips of plastic scintillators, a 24-strip prototype was built and tested. The prototype consists of detection modules arranged axially forming a cylindrical diagnostic chamber with an inner diameter of 360 mm and an axial field-of-view of 300 mm. Promising perspectives for a low-cost construction of a total-body PET scanner are opened due to an axial arrangement of strips of plastic scintillators, which have a small light attenuation, superior timing properties, and the possibility of cost-effective increase of the axial field-of-view. The presented prototype comprises dedicated solely digital front-end electronic circuits and a triggerless data acquisition system which required development of new calibration methods including time, thresholds and gain synchronization. The system and elaborated calibration methods including first results of the 24-module J-PET prototype are presented and discussed. The achieved coincidence resolving time equals to CRT = 490 +- 9 ps. This value can be translated to the position reconstruction accuracy s(Dl) = 18 mm which is fairly position-independent Keywords: positron emission tomography, plastic scintillators, J-PET.
Sensitivity of discrete symmetry tests in the positronium system with the J-PET detector
A. Gajos
abstract
Study of certain angular correlations in the three-photon annihilations of the triplet state of positronium, the electron?positron bound state, may be used as a probe of potential CP and CPT-violating effects in the leptonic sector. We present the perspectives of CP and CPT tests using this process recorded with a novel detection system for photons in the positron annihilation energy range, the Jagiellonian Positron Emission Tomography (J-PET). We demonstrate the capability of this system to register three-photon annihilations with an unprecedented range of kinematical configurations and to measure the CPT-odd correlation between positronium spin and annihilation plane orientation with a precision improved by at least an order of magnitude with respect to present results. We also discuss the means to control and reduce detector asymmetries in order to allow J-PET to set the first measurement of the correlation between positronium spin and momentum of the most energetic annihilation photon which has never been studied to date.
Prospects and clinical perspectives of total-body PET imaging using plastic scintillators
P. Moskal, E. Ł. Stępień
abstract
Total-body PET opens new diagnostic paradigm with prospects for personalized disease treatment, yet the high cost of the current crystal-based PET technology limits dissemination of total-body PET in hospitals and even in the research
clinics.
The J-PET tomography system is based on axially arranged low-cost plastic scintillator strips. It constitutes a realistic cost-effective solution of a total-body PET for broad clinical applications.
High sensitivity of total-body J-PET and trigger-less data acquisition enable multi-photon imaging, opening possibilities for multi-tracer and positronium imaging, thus promising quantitative enhancement of specificity in cancer and inflammatory diseases assessment.
An example of dual tracer analysis, becoming possible with total-body J-PET system, could be a concurrent application of FDA-approved 82Rb-Chloride and [18F]FDG, allowing simultaneous assessment of myocardium metabolic rate and perfusion of the cardiovascular system.
Technical Attenuation Length Measurement of Plastic Scintillator Strips for the Total-Body J-PET Scanner
Ł. Kapłon
abstract
The aim of the performed technical attenuation length measurement is to compare light attenuation of a few commercially available plastic scintillator strips and to select the best scintillator type for the total-body Jagiellonian Positron Emission Tomograph (J-PET) construction. Few models of plastic scintillators obtained from different manufacturers were tested. All strips had the same rectangular cross section and dimensions 6 mm x 24 mm x 1000 mm with all surfaces polished. The light attenuation length was measured by exciting the scintillator strip at different positions with an ultraviolet lamp emitting at 365 nm and reading light signal collected at one side of the strip by a silicon photodiode. Among measured plastic scintillators, EJ-200 possesses the highest technical light attenuation length and is suitable for construction of total-body J-PET scanner.
X-ray microtomography as a new approach for imaging and analysis of tumor spheroids
H. Karimi, B. Leszczyński, T. Kołodziej, E. Kubicz, M. Przybyło, E. Stępień
abstract
Three-dimensional (3D) spheroids mimic important properties of tumors and may soon become a reasonable
substitute for animal models and human tissue, eliminating numerous problems related to in vivo and ex vivo
experiments and pre-clinical drug trials. Currently, various imaging methods including X-ray microtomography
(micro-CT), exist but their spatial resolution is limited. Here, we visualized and provided a morphological
analysis of spheroid cell cultures using micro-CT and compared it to that of confocal microscopy. An approach is
proposed that can potentially open new diagnostic opportunities to determine the morphology of cancer cells
cultured in 3D structures instead of using actual tumors.
Spheroids were formed from human melanoma cell lines WM266-4 and WM115 seeded at different cell
densities using the hanging drop method. Micro-CT analysis of spheroid showed that spheroid size and shape
differed depending on the cell line, initial cell number, and duration of culture.
The melanoma cell lines used in this study can successfully be cultured as 3D spheroids and used to substitute
human and animal models in pre-clinical studies. The micro-CT allows for high-resolution visualization of the
spheroids structure.
State of the art in total body PET
S. Vandenberghe, P. Moskal and J.S. Karp
abstract
The idea of a very sensitive positron emission tomography (PET) system covering a large portion of the body of a patient already dates back to the early 1990s. In the period 2000-2010, only some prototypes with long axial field of view (FOV) have been built, which never resulted in systems used for clinical research. One of the reasons was the limitations in the available detector technology, which did not yet have sufficient energy resolution, timing resolution or countrate capabilities for fully exploiting the benefits of a long axial FOV design. PET was also not yet as widespread as it is today: the growth in oncology, which has become the major application of PET, appeared only after the introduction of PET-CT (early 2000).The detector technology used in most clinical PET systems today has a combination of good energy and timing resolution with higher countrate capabilities and has now been used since more than a decade to build time-of-flight (TOF) PET systems with fully 3D acquisitions. Based on this technology, one can construct total body PET systems and the remaining challenges (data handling, fast image reconstruction, detector cooling) are mostly related to engineering. The direct benefits of long axial FOV systems are mostly related to the higher sensitivity. For single organ imaging, the gain is close to the point source sensitivity which increases linearly with the axial length until it is limited by solid angle and attenuation of the body. The gains for single organ (compared to a fully 3D PET 20-cm axial FOV) are limited to a factor 3-4. But for long objects (like body scans), it increases quadratically with scanner length and factors of 10?40 × higher sensitivity are predicted for the long axial FOV scanner. This application of PET has seen a major increase (mostly in oncology) during the last 2 decades and is now the main type of study in a PET centre. As the technology is available and the full body concept also seems to match with existing applications, the old concept of a total body PET scanner is seeing a clear revival. Several research groups are working on this concept and after showing the potential via extensive simulations; construction of these systems has started about 2 years ago. In the first phase, two PET systems with long axial FOV suitable for large animal imaging were constructed to explore the potential in more experimental settings. Recently, the first completed total body PET systems for human use, a 70-cm-long system, called PennPET Explorer, and a 2-m-long system, called uExplorer, have become reality and first clinical studies have been shown. These results illustrate the large potential of this concept with regard to low-dose imaging, faster scanning, whole-body dynamic imaging and follow-up of tracers over longer periods. This large range of possible technical improvements seems to have the potential to change the current clinical routine and to expand the number of clinical applications of molecular imaging. The J-PET prototype is a prototype system with a long axial FOV built from axially arranged plastic scintillator strips.This paper gives an overview of the recent technical developments with regard to PET scanners with a long axial FOV covering at least the majority of the body (so called total body PET systems). After explaining the benefits and challenges of total body PET systems, the different total body PET system designs proposed for large animal and clinical imaging are described in detail. The axial length is one of the major factors determining the total cost of the system, but there are also other options in detector technology, design and processing for reducing the cost these systems. The limitations and advantages of different designs for research and clinical use are discussed taking into account potential applications and the increased cost of these systems.
Performance assessment of the 2gamma positronium imaging with the total-body PET scanners
P. Moskal, D. Kisielewska, Z. Bura, C. Chhokar, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, J. Gajewski, A. Gajos, M. Gorgol, R. Del Grande, B. C. Hiesmayr, B. Jasińska, K. Kacprzak, A. Kamińska, Ł. Kapłon, H. Karimi, G. Korcyl, P. Kowalski, N. Krawczyk, W. Krzemień, T. Kozik, E. Kubicz, P. Małczak, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, M. Pędziwiatr, L. Raczyński, J. Raj, A. Ruciński, S. Sharma, Shivani, R. Y. Shopa, M. Silarski, M. Skurzok, E. Ł. Stępień, S. Vandenberghe, W. Wiślicki, B. Zgardzińska
abstract
In living organisms the positron-electron annihilation (occurring during the PET imaging) proceeds in about 30% via creation of a metastable ortho-positronium atom. In the tissue, due to the pick-off and conversion processes, over 98% of ortho-positronia annihilate into two 511~keV photons. In this article we assess the feasibility for reconstruction of the mean ortho-positronium lifetime image based on annihilations into two photons. The main objectives of this work include: (i) estimation of the sensitivity of the total-body PET scanners for the ortho-positronium mean lifetime imaging using 2gamma annihilations, and (ii) estimation of the spatial and time resolution of the ortho-positronium image as a function of the coincidence resolving time (CRT) of the scanner. Simulations are conducted assuming that radiopharmaceutical is labelled with 44Sc isotope emitting one positron and one prompt gamma. The image is reconstructed on the basis of triple coincidence events. The ortho-positronium lifetime spectrum is determined for each voxel of the image. Calculations were performed for cases of total-body detectors build of (i) LYSO scintillators as used in the EXPLORER PET, and (ii) plastic scintillators as anticipated for the cost-effective total-body J-PET scanner. To assess the spatial and time resolution the three cases were considered assuming that CRT is equal to 140ps, 50ps and 10ps. The estimated total-body PET sensitivity for the registration and selection of image forming triple coincidences is larger by a factor of 12.2 (for LYSO PET) and by factor of 4.7 (for plastic PET) with respect to the sensitivity for the standard 2gamma imaging by LYSO PET scanners with AFOV=20cm.
Estimating relationship between the Time Over Threshold and energy loss by photons in plastic scintillators used in the J-PET scanner
S. Sharma, J. Chhokar, C. Curceanu, E. Czerwinski, M. Dadgar, K. Dulski, J. Gajewski, A. Gajos, M. Gorgol, N. Gupta-Sharma, R. Del Grande, B. C. Hiesmayr, B. Jasinska, K. Kacprzak, L. Kaplon, H. Karimi, D. Kisielewska, K. Klimaszewski, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemien, E. Kubicz, M. Mohammed, Sz. Niedzwiecki, M. Palka, M. Pawlik-Niedzwiecka, L. Raczynski, J. Raj, A. Rucinski, Shivani, R. Y. Shopa, M. Silarski, M. Skurzok, E. L. Stepien, W. Wislicki, B. Zgardzinska, P. Moskal
abstract
Time-Over-Threshold (TOT) technique is being used widely due to its implications in developing the multi channel readouts mainly when fast signal processing is required. Using TOT technique as a measure of energy loss instead of charge integration methods significantly reduces the signals readout cost by combining the time and energy information. Therefore, this approach can potentially be used in J-PET tomograph which is build from plastic scintillators characterized by fast light signals. The drawback in adopting this technique is lying in the non-linear correlation between input energy loss and TOT of the signal. The main motivation behind this work is to develop the relationship between TOT and energy loss and validate it with the J-PET tomograph.
The experiment was performed using the 22Na beta emitter source placed in the center of the J-PET tomograph. One can obtain primary photons of two different energies: 511 keV photon from the annihilation of positron (direct annihilation or through the formation of para-Positronim atom or pick-off process of ortho-Positronium atoms), and 1275 keV prompt photon. This allows to study the correlation between TOT values and energy loss for energy range up to 1000 keV. As the photon interacts dominantly via Compton scattering inside the plastic scintillator, there is no direct information of primary photon energy. However, using the J-PET geometry one can measure the scattering angle of the interacting photon. Since, 22Na source emits photons of two different energies, it is required to know unambiguously the energy of incident photons and its corresponding scattering angle for the estimation of energy deposition. In this work, the relationship between Time Over Threshold and energy loss by interacting photons inside the plastic scintillators used in J-PET scanner is established for a energy deposited range 100-1000 keV.
Hit-time and hit-position reconstruction in strips of plastic scintillators using multi-threshold readouts
N. G. Sharma, M. Silarski, J. Chhokar, E. Czerwinski, C. Curceanu, K. Dulski, K. Farbaniec, A. Gajos, R. Del Grande, M. Gorgol, B. C. Hiesmayr, B. Jasinska, K. Kacprzak, L. Kaplon, D. Kisielewska, K. Klimaszewski, G. Korcyl, P. Kowalski, N. Krawczyk, W. Krzemien, T. Kozik, E. Kubicz, M. Mohammed, Sz. Niedzwiecki, M. Palka, M. Pawlik-Niedzwiecka, L. Raczynski, J. Raj, S. Sharma, S. Shivani, R. Y. Shopa, M. Skurzok, W. Wislicki, B. Zgardzinska, P. Moskal
abstract
In this article a new method for the reconstruction of hit-position and hit-time of photons in long scintillator detectors is investigated. This research is motivated by the recent development of the positron emission tomography scanners based on plastic scintillators. The proposed method constitutes a new way of signal processing in Multi-Voltage-Technique. It is based on the determination of the degree of similarity between the registered signals and the synchronized model signals stored in a library. The library was established for a set of well defined hit-positions along the length of the scintillator. The Mahalanobis distance was used as a measure of similarity between the two compared signals. The method was validated on the experimental data measured using two-strips J-PET prototype with dimensions of 5x9x300 mm. The obtained Time-of-Flight (TOF) and spatial resolutions amount to 325 ps (FWHM) and 25 mm (FWHM), respectively. The TOF resolution was also compared to the results of an analogous study done using Linear Fitting method. The best TOF resolution was obtained with this method at four pre-defined threshold levels which was comparable to the resolution achieved from the Mahalanobis distance at two pre-defined threshold levels. Although the algorithm of Linear Fitting method is much simpler to apply than the Mahalanobis method, the application of the Mahalanobis distance requires a lower number of applied threshold levels and, hence, decreases the costs of electronics used in PET scanner.
J-PET Framework: Software platform for PET tomography data reconstruction and analysis
W. Krzemień, A. Gajos, K. Kacprzak, K. Rakoczy, G. Korcyl
abstract
J-PET Framework is an open-source software platform for data analysis, written in C++ and based on the ROOT package. It provides a common environment for implementation of reconstruction, calibration and filtering procedures, as well as for user-level analyses of Positron Emission Tomography data. The library contains a set of building blocks that can be combined by users with even little programming experience, into chains of processing tasks through a convenient, simple and well-documented API. The generic input-output interface allows processing the data from various sources: low-level data from the tomography acquisition system or from diagnostic setups such as digital oscilloscopes, as well as high-level tomography structures e.g. sinograms or a list of lines-of-response. Moreover, the environment can be interfaced with Monte Carlo simulation packages such as GEANT and GATE, which are commonly used in the medical scientific community.
Towards Lattice Quantum Chromodynamics on FPGA devices
G. Korcyl, P. Korcyl
abstract
In this paper we describe a single-node, double precision Field Programmable Gate Array (FPGA) implementation of the Conjugate Gradient algorithm in the context of Lattice Quantum Chromodynamics. As a benchmark of our proposal we invert numerically the Dirac-Wilson operator on a 4-dimensional grid on three Xilinx hardware solutions: Zynq Ultrascale+ evaluation board, the Alveo U250 accelerator and the largest device available on the market, the VU13P device. In our implementation we separate software/hardware parts in such a way that the entire multiplication by the Dirac operator is performed in hardware, and the rest of the algorithm runs on the host. We find out that the FPGA implementation can offer a performance comparable with that obtained using current CPU or Intel?s many core Xeon Phi accelerators. A possible multiple node FPGA-based system is discussed and we argue that power-efficient High Performance Computing (HPC) systems can be implemented using FPGA devices only.
Studies of Ortho-Positronium Decays into Three Photons with the J-PET Detector
A. Gajos on behalf of the J-PET collaboration
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) setup, besides being the first PET scanner built with plastic scintillators is currently used to conduct a broad range of experiments involving ortho-positronium (o-Ps) decays into three photons. We present results of studies of o-Ps->3g decays performed in J-PET with a view to search for angular correlations between the photons' momenta and positronium spin direction which would violate the combined CPT symmetry, scarcely tested in leptonic systems. To date, the most precise CPT test using ortho-positronium decays reached the precision of 3×10-3 whereas effects limiting the sensitivity are only expected at the level of 10-9. In the discussed J-PET measurement, ortho-positronium atoms are created by positrons from a 22Na source thermalizing in an extensive-size cylindrical target of mesoporous silica and decay positions are reconstructed using a trilateration-based technique. Decay photons are recorded by 192 strips of plastic scintillators with high timing resolution. Such a setup allows for registration of an unprecedented spectrum of geometrical configurations of o-Ps->3g decays including also correlations with positronium spin. With an angular resolution and o-Ps polarization control improved with respect to previous measurements, J-PET aims at achieving the sensitivity of CPT test at a precision level of at least 10-4.
Synthesis and Characterization of Plastic Scintillators for the Total-body J-PET Scanner
Ł. Kapłon
abstract
The aim of the research was to develop polystyrene scintillator for use in the novel time-of-flight Jagiellonian Positron Emission Tomography (J-PET) scanner being elaborated for the whole-body imaging. To achieve this goal, polystyrene based plastic scintillators with the different chemical compositions were produced and characterized. Light output, decay time and emission spectra were measured to develop best composition of polystyrene scintillator.
Simulation of Positronium Decays in View of Charge Conjugation Symmetry Test with the J-PET Detector
J. Chhokar on behalf of the J-PET Collaboration
abstract
We present search of the C-forbidden decays of positronium with the J-PET detector. J-PET is a first
tomograph based on plastic scintillators and, due to large acceptance and high angular resolution, it is suitable for
studies of various phenomena such as: discrete symmetries in decays of positronium atom or entangled states of
photons as well as the medical imaging. In view of the C-symmetry test, the J-PET is used inter alia to determine
the angular distribution of the three annihilation photons from positronium decay.
Development of J-PEM for Breast Cancer Detection
Shivani, E. Łuczynska, S. Heinze and P. Moskal
abstract
A detection system of the conventional PET tomograph is set-up to record data from e+e- annihilation
into two photons, each with energy of 511 keV, and to give information about the spatial density distribution of
a radiopharmaceutical in the patients body. Dedicated positron emission mammography (PEM) systems provide
a potentially high sensitivity, high-resolution, low attenuation, and lower cost alternative to whole body PET.
We have designed, built, and performed initial evaluation of a large field-of-view Jagiellonian Positron Emission
Mammography (J-PEM) system. This 3D system is based on novel idea of applying plastic scintillators to detect
annihilation photons and improving spatial resolution by utilization of wavelength shifters (WLS). In addition,
this device is being developed in view of classification of malignancy based on the possibility of positronium mean
lifetime imaging. Here we present the first results from the simulations as motivation for our investigation.
J-PET Monte Carlo Simulations for Time-Reversal Symmetry Test in Ortho-Positronium Decay
J. Raj, D. Kisielewska and E. Czerwiński
abstract
This article reports the development of Monte Carlo simulations of the J-PET detector using the Geant4 toolkit
aimed at serving as a foundation for testing the time-reversal symmetry in the decay of ortho-Positronium (o-Ps)
atoms. In order to observe asymmetries in time-reversal, it is important to understand the physical proper-
ties of the signal candidates (o-Ps->3g) recorded by the detector setup. The simulations aim at replicating
the experimental procedure of producing meta-stable triplet states of positronium and testing the T-symmetry
using symmetry-odd operators with the Jagiellonian-Positron Emission Tomograph (J-PET) detector.
TOT Method for the Disentanglement of Photons in Positron Annihilation Lifetime Spectroscopy
S. Sharma on behalf of J-PET collaboration
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is a multidisciplinary device aiming to perform studies in medical field as well as to test the fundamental symmetries. The plastic scintillators offer very good time resolution. Although, due to the low atomic number of the plastic material, the incident photons interact mainly via the Compton effect. Thus instead of full energy deposition by the photon, there is a range of energy depositions depending on its scattering angle. For the positron annihilation lifetime spectroscopy studies, it is necessary to distinguish the photons emitted from different processes. Therefore, it becomes crucial to find a method to disentangle the photons of different energies. In the present work, the control spectra are discussed which can unambiguously categorize the photons of different energies and origins, which are essential for the studies based on the positronium lifetime
PALS Avalanche - A New PAL Spectra Analysis Software
K. Dulski
abstract
A novel concept for tomography of the human body developed by the Jagiellonian Positronium EmissionTomography (J-PET) project provides the possibility to combine metabolic information collected by standardPET with structural information obtained from positronium lifetime. This results in a morphometric image. Tothis end, there is a need to develop software compatible with the J-PET Framework for fast online analysis duringimaging. PALS Avalanche is a software developed on UNIX system and based on ROOT software, which allows oneto decompose positronium annihilation lifetime spectra in the form of a set of single time differences and histogram.Performance of the PALS Avalanche will be tested by analysing simulated PAL spectra.
Studies of the ortho-Positronium lifetime for cancer diagnostics
Z. Bura, K. Dulski, E. Kubicz, P. Małczak, M. Pędziwiatr, M. Szczepanek, E.Ł. Stępień, P. Moskal
abstract
Positron Annihilation Lifetime Spectroscopy (PALS) is a technique based on the analysis of the lifetime of positronium emitted from implanted or delivered positronium donors. This technique employs the lifetime and intensity dependence on the structure of analyzed material. Due to this specific features, PALS might be used in further research protocols and clinical studies for cancer diagnostic purposes. This article reports the progress in the study design, main objectives of the study, protocols of measurement sand data analysis and further perspective of this study. The main goal of this work was to show the effectiveness of this method and progress in its development. For this purpose, colorectal cancer was examined.
Application of silicon-polymer composite varistors to protect sensitive medical imaging circuits and performing better voltage bias for SiPMs
F. Tayefi Ardebili, M. Ghafouri
abstract
Nowadays, Silicon photomultipliers (SiPM) become a reasonable choice
for Time-of-Flight Positron Emission Tomography (TOF-PET). To achieve
the best performance of SiPMs, it is necessary to adjust a suitable voltage
bias. In this article, we are using varistors which protect SiPM from voltage
fluctuations. The silicon-polymer composite varistors prepared using hot
press method have been investigated. Research on (current-voltage) characteristics of samples shows that by increasing silicon content in the mixture, the breakdown voltage decreases from 110 V to 70 V. The results also
show that increasing silicon content decreases the potential barrier height
from 0.29 eV to 0.26 eV, however, leakage current increases. Increasing
silicon content increases nonlinear coefficient from 4.1 to 4.8. Using these
techniques gives us ability to produce suitable surge protector for medical
imaging modalities.
Gate simulation study of the 24-module J-PET scanner: data analysis and image reconstruction
M. Dadgar, P. Kowalski, for the J-PET Collaboration
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is a novel PET
device that, in contrast to commercial PET scanners, is based on plastic
scintillator strips. Modular J-PET is the latest prototype that consists
of 24 modules arranged in a cylinder. In this study, 6 point-like sources
defined in the NEMA spatial resolution standard were simulated twice with
total activities of 60 kBq and 60 MBq, respectively. Results of simulations
were processed with the GOJA software and reconstructed with the QETIR
package
A Method for Time Calibration of PET Systems Using Fixed beta+ Radioactive Source
K. Dulski, M. Silarski, P. Moskal
abstract
The Positron Emission Tomography (PET) is one of the most popular imaging techniques of the human body. During the PET scans, a positron from the beta+ emitter given to the patient, directly or after forming a positronium, annihilates with an electron from the patient, with emission of photons. Registration of produced photons allows one to reconstruct the distribution of radioisotopes in the patient's body, further interpreted as the metabolic image. The imaging of metabolism can be improved by measurement of the time difference between registration of the two photons in coincidence (Time-of-Flight (TOF))[1]. In the case of the TOF-PET scanners, the time resolution of the detection system and its calibration is crucial. The Jagiellonian Positron Emission Tomograph (J-PET) detector is an example of the TOF-PET system, constructed at the Jagiellonian University in Kraków, which is based on plastic scintillators and very fast electronics
Melanoma spheroids as a model for cancer imaging study
E. Ł. Stępień, H. Karimi, B. Leszczyński, M. Szczepanek
abstract
In contrast to standard 2D cell cultures, spheroids are three-dimensional (3D) models which can mimic natural conditions of cancer growth and metabolism. Their complex structure can be investigated and analyzed using fluorescence microscopy and micro-tomographic imaging (micro-CT) as a new technique. In this study, we show application of two different melanoma cell lines (WM115 and WM266) with different biological characteristics to form spheroids by a hanging drop method.
Construction of the Vacuum Chambers for J-PET Experiments with Positron Annihilation
Marek Gorgol, Bożena Jasińska, Marek Kosior, Eugeniusz Stępień, Paweł Moskal
abstract
Vacuum chambers are necessary for the physics experiments planned to be carried out with the use of the J-PET detector. Two chambers manufactured and used for particular runs of experiments had generally cylindrical shapes, while the radioactive source was placed in the center of each chamber. The highly porous material, used as a target in which positrons positronium atoms annihilate, was placed in the immediate vicinity of the source. Such orientation ensures the axially symmetrical response of J-PET scintillators and allows to carry out correct calibration. The variation of material used for manufacturing of the chambers (aluminum/plastic), allows to observe the detector response with various rates of absorption and scattering of annihilation quanta. Such determination is necessary for proper analysis of multi-quanta annihilation, which will be needed for planned experiments.
Search for the charge symmetry forbidden decays of electron-positron bound state using the J-PET detector
J. Chhokar on behalf J-PET collaboration
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is a multi-purpose device built out of plastic scintillators. With large acceptance and high angular resolution, it is suitable for the studies of various phenomena such as discrete symmetries in decay of positronium atom or entangled states of photons as well as medical imaging. J-PET enables the measurement of momenta together with photon polarization related observables. Large acceptance and high granularity of the J-PET detector enables measurement of ortho-positronium decays into three photons in the whole phase space. In this paper, we present the search of the C-forbidden decays of positronium with the J-PET detector.
Investigations on physical and biological range uncertainties in Krakow proton beam therapy centre
A. Rucinski, J. Baran, G. Battistoni, A. Chrostowska, M. Durante, J. Gajewski, M. Garbacz, K. Kisielewicz, N. Krah, V. Patera, M. Pawlik-Niedźwiecka, I. Rinaldi, B. Rozwadowska-Bogusz, E. Scifoni, A. Skrzypek, F. Tommasino, A. Schiavi, P. Moskal
abstract
Physical and biological range uncertainties limit the clinical potential of Proton Beam Therapy (PBT). In this proceedings, we report on two research projects, which we are conducting in parallel and which both tackle the problem of range uncertainties. One aims at developing software tools and the other at developing detector instrumentation. Regarding the first, we report on our development and pre-clinical application of a GPU-accelerated Monte Carlo (MC) simulation toolkit Fred. Concerning the letter, we report on our investigations of plastic scintillator based PET detectors for particle therapy delivery monitoring. We study the feasibility of Jagiellonian-PET detector technology for proton beam therapy range monitoring by means of MC simulations of the beta+ activity induced in a phantom by proton beams and present preliminary results of PET image reconstruction. Using a GPU-accelerated Monte Carlo simulation toolkit Fred and plastic scintillator based PET detectors we aim to improve patient treatment quality with protons.
Development of J-PEM for breast cancer detection and diagnosis using positronium imaging
Shivani, E. Łuczyńska, S. Heinze, P. Moskal
abstract
The purpose of the presented investigations is to design, construct and establish the characteristic performance of the Jagiellonian Positron Emission Mammography(J-PEM), being designed for the detection and diagnosis of breast cancer. Its construction is based on a novel idea of PET tomography based on plastic scintillators and wavelength shifter (WLS) and a new concept of positronium imaging. We have prepared a simulation program based on Monte Carlo methods for optimizing the geometry and material of the J-PEM prototype. Here we present the first results from the simulations and a brief review of the state of art of breast imaging modalities and their characteristics motivating our investigation.
Towards time reversal symmetry test with o-PS decays using the J-PET detector
J. Raj, K. Dulski, E. Czerwiński
abstract
One of the features of the triplet state of positronium (ortho-positronium) atoms is its relatively longer lifetime when compared to the singlet states of positronium (para-positronium) atoms. The most probable decay of orthopositronium is into three annihilation photons. In order to test the discrete symmetry using the time-reversal symmetry odd-operator, it is important to identify ortho-positronium decay. Identification of the decay of orthopositronium atoms by measuring the positronium annihilation lifetime with the Jagiellonian-Positron Emission Tomograph (J-PET) is presented in this article.
Feasibility of Ortho-positronium Lifetime Studies with the J-PET Detector in Context of Mirror Matter Models
W. Krzemien, E. Pérez del Río, K. Kacprzak
abstract
We discuss the possibility to perform the experimental searches for invisible decays in the ortho-positronium system with the J-PET detector.
Feasibility study of the positronium imaging with the J-PET tomograph
P. Moskal, D. Kisielewska, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, M. Gorgol, B. Hiesmayr, B. Jasińska, K. Kacprzak, Ł. Kapłon, G. Korcyl, P. Kowalski, W. Krzemień, T. Kozik, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczyński, J. Raj, S. Sharma, Shivani, R.Y. Shopa, M. Silarski, M. Skurzok, E. Stępień, W. Wiślicki, B. Zgardzińska
abstract
A detection system of the conventional PET tomograph is set-up to record data from e+ e- annihilation into two photons with energy of 511 keV, and it gives information on the density distribution of a radiopharmaceutical in the body of the object. In this paper we explore the possibility of performing the three gamma photons imaging based on ortho- positronium annihilation, as well as the possibility of positronium average lifetime imaging with the J-PET tomograph constructed from plastic scintillators. For this purposes simulations of the ortho-positronium formation and its annihilation into three photons were performed taking into account distributions of photons' momenta as predicted by the theory of quantum electrodynamics and the response of the J-PET tomograph. In order to test the proposed ortho-positronium lifetime image reconstruction method, we concentrate on the decay of the ortho-positronium into three photons and applications of radiopharmaceuticals labeled with isotopes emitting a prompt gamma quantum. The proposed method of imaging is based on the determination of hit-times and hit-positions of registered photons which enables the reconstruction of the time and position of the annihilation point as well as the lifetime of the ortho-positronium on an event-by-event basis. We have simulated the production of the positronium in a cylindrical phantom composed of a set of different materials in which the ortho-positronium lifetime varied from 2 ns to ~2.9 ns, as expected for ortho-positronium created in the human body. The presented reconstruction method for total-body J-PET like detector allows to achieve a mean lifetime resolution of about 40 ps. Recent Positron Annihilation Lifetime Spectroscopy measurements of cancerous and healthy uterine tissues show that this sensitivity may allow to study the morphological changes in cell structures.
Simulation studies of annihilation-photon's polarisation via Compton scattering with the J-PET tomograph
N. Krawczyk, B.C. Hiesmayr, J. Chhokar, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, M. Gorgol, N. Gupta-Sharma, B. Jasińska, D. Kisielewska, G. Korcyl, P. Kowalski, W. Krzemień, T. Kozik, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczyński, J. Raj, K. Rakoczy, Z. Rudy, S. Sharma, Shivani, R.Y. Shopa, M. Silarski, M. Skurzok, W. Wiślicki, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
J-PET is the first positron-emission tomograph (PET) constructed from plastic scintillators. It was optimized for the detection of photons from electron-positron annihilation. Such photons, having an energy of 511 keV, interact with electrons in plastic scintillators predominantly via the Compton effect. Compton scattering is at most probable at an angle orthogonal to the electric field vector of the interacting photon. Thus registration of multiple photon scatterings with J-PET enables to determine the polarization of the annihilation photons. In this contribution we present estimates on the physical limitation in the accuracy of the polarization determination of 511 keV photons with the J-PET detector.
Investigating the Dirac Operator Evaluation with FPGAs
G. Korcyl, P. Korcyl
abstract
In recent years, computational capacity of single Field Programmable Gate Array (FPGA) devices as well as their versatility have increased signifcantly. Adding to that fact, the High Level Synthesis frameworks allowing to program such processors in a high-level language like C++, makes modern FPGA devices a serious candidate as building blocks of a general-purpose High Performance Computing solution. In this contribution we describe benchmarks which we performed using a kernel from the Lattice QCD code, a highly compute-demanding HPC academic code for elementary particle simulations on the newest device from Xilinx, the U250 accelerator card. We describe the architecture of our solution and benchmark its performance on a single FPGA device running in two modes: using either external or embedded memory. We discuss both approaches in detail and provide assessment for the necessary memory throughput and the minimal amount of resources needed to deliver optimal performance depending on the available hardware. Our considerations can be used as guidelines for estimating the performance of some larger, manynode systems.
Positronium in medicine and biology
P. Moskal, B. Jasińska, E. Ł. Stępień, S. D. Bass
abstract
In positron emission tomography, as much as 40% of positron annihilation occurs through the production of positronium atoms inside the patient's body. The decay of these positronium atoms is sensitive to metabolism and could provide information about disease progression. New research is needed to take full advantage of what positronium decays reveal.
Witnessing Entanglement In Compton Scattering Processes Via Mutually Unbiased Bases
B.C. Hiesmayr, P. Moskal
abstract
We present a quantum information theoretic version of the Klein-Nishina formula. This formulation
singles out the quantity, the a priori visibility, that quantifies the ability to deduce the polarisation
property of single photons. The Kraus-type structure allows a straightforward generalisation to the
multiphoton cases, relevant in the decay of positronium which is utilized e.g. for metabolic PETimaging
(Positron- Emission- Tomograph). Predicted by theory but never experimentally proven, the
two- or three-photon states should be entangled. We provide an experimentally feasible method to
witness entanglement for these processes via MUBs (Mutually Unbiased Bases), exploiting Bohr?s
complementarity. Last but not least we present explicit cases exemplifying the interrelation of
geometry and entanglement including relations to its potentiality for teleportation schemes or Bell
inequality violations or in future for detecting cancer in human beings.
QED and Fundamental Symmetries in Positronium Decays
Steven D. Bass
abstract
We discuss positronium decays with emphasis on tests of fundamental symmetries and the constraints from measurements of other precision observables involving electrons and photons.
Feasibility studies of the polarization of photons beyond the optical wavelength regime with the J-PET detector
P. Moskal, N. Krawczyk, B. C. Hiesmayr, M. Bała, C. Curceanu, E. Czerwinski, K. Dulski, A. Gajos, M. Gorgol, R. Del Grande, B. Jasinska, K. Kacprzak, L. Kapłon, D. Kisielewska, K. Klimaszewski, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemien, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczynski, J. Raj, Z. Rudy, S. Sharma, M. Silarski, Shivani, R. Y. Shopa, M. Skurzok, W. Wislicki, B. Zgardzinska
abstract
J-PET is a detector optimized for registration of photons from the electron-positron annihilation via plastic scintillators where photons interact predominantly via Compton scattering. Registration of both primary and scattered photons enables to determinate the linear polarization of the primary photon on the event by event basis with a certain probability. Here we present quantitative results on the feasibility of such polarization measurements of photons from the decay of positronium with the J-PET and explore the physical limitations for the resolution of the polarization determination of 511keV photons via Compton scattering. For scattering angles of about 82 degree (where the best contrast for polarization measurement is theoretically predicted) we find
that the single event resolution for the determination of the polarization is about 40 degree (predominantly due to properties
of the Compton effect). However, for samples larger than ten thousand events the J-PET is capable of determining relative average polarization of these photons with the precision of about few degrees. The obtained results open new perspectives for studies of various physics phenomena such as quantum entanglement and tests of discrete symmetries in decays of positronium and extend the energy range of polarization measurements by five orders of magnitude beyond the optical wavelength regime.
Evaluation of Single-Chip, Real-Time Tomographic Data Processing on FPGA - SoC Devices
G. Korcyl, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, B. Flak, A. Gajos, B. Głowacz, M. Gorgol, B. C. Hiesmayr, B. Jasińska, K. Kacprzak, M. Kajetanowicz, D. Kisielewska, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pawlik- Niedźwiecka, M. Pałka, L. Raczyński, P. Rajda, Z. Rudy, P. Salabura, N. G. Sharma, S. Sharma, R. Y. Shopa, M. Skurzok, M. Silarski, P. Strzempek, A. Wieczorek, W. Wiślicki, R. Zaleski, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
A novel approach to tomographic data processing
has been developed and evaluated using the Jagiellonian PET (J-
PET) scanner as an example. We propose a system in which there
is no need for powerful, local to the scanner processing facility,
capable to reconstruct images on the fly. Instead we introduce a
Field Programmable Gate Array (FPGA) System-on-Chip (SoC)
platform connected directly to data streams coming from the
scanner, which can perform event building, filtering, coincidence
search and Region-Of-Response (ROR) reconstruction by the
programmable logic and visualization by the integrated
processors. The platform significantly reduces data volume
converting raw data to a list-mode representation, while
generating visualization on the fly.
A feasibility study of the time reversal violation test based on polarization of annihilation photons from the decay of ortho-Positronium with the J-PET detector
J. Raj, A. Gajos, C. Curceanu, E. Czerwiński, K. Dulski, M. Gorgol, N. Gupta-Sharma, B. C. Hiesmayr, B. Jasińska, K. Kacprzak, Ł. Kapłon, D. Kisielewska, K. Klimaszewski, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczyński, K. Rakoczy, Z. Rudy, S. Sharma, Shivani, R.Y. Shopa, M. Silarski, M. Skurzok, W. Wiślicki, B. Zgardzińska, P. Moskal
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is a novel device being developed at Jagiellonian University in Krakow, Poland based on organic scintillators. J-PET is an axially symmetric and high acceptance scanner that can be used as a multi-purpose detector system. It is well suited to pursue tests of discrete symmetries in decays of positronium in addition to medical
imaging. J-PET enables the measurement of both momenta and the polarization vectors of annihilation photons. The latter is a unique feature of the J-PET detector which allows the study of time reversal symmetry violation operator which can be constructed solely from the annihilation photons momenta before and after the scattering in the detector.
Commissioning of the J-PET detector in view of the positron annihilation lifetime spectroscopy
K. Dulski, C. Curceanu, E. Czerwiński, A. Gajos, M. Gorgol, N. Gupta-Sharma, B. C. Hiesmayr, B. Jasińska, K. Kacprzak, Ł. Kapłon, D. Kisielewska, K. Klimaszewski, G. Korcyl, P. Kowalski, N. Krawczyk, W. Krzemień, T. Kozik, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczyński, J. Raj, K. Rakoczy, Z. Rudy, S. Sharma, Shivani, R. Y. Shopa, M. Silarski, M. Skurzok, W. Wiślicki, B. Zgardzińska, P. Moskal
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is the first PET device built from plastic scintillators. It is a multi-purpose detector designed for medical imaging and for studies of properties of positronium atoms in porous matter and in living organisms. In this article we report on the commissioning of the J-PET detector in view of studies of positronium decays. We present results of analysis of the positron lifetime measured in the porous polymer. The obtained results prove that J-PET is capable of performing simultaneous imaging of the density distribution of annihilation points as well as positron annihilation lifetime spectroscopy.
Feasibility study of the time reversal symmetry tests in decay of metastable positronium atoms with the J-PET detector
A. Gajos, C. Curceanu, E. Czerwinski, K. Dulski, M. Gorgol, N. Gupta-Sharma, B.C. Hiesmayr, B. Jasinska, K. Kacprzak, L. Kaplon, D. Kisielewska, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemien, E. Kubicz, M. Mohammed, Sz Niedzwiecki, M. Paalka, M. Pawlik-Niedzwiecka, L. Raczynski, J. Raj, Z. Rudy, S. Sharma, Shivani, R. Shopa, M. Silarski, M. Skurzok, W. Wislicki, B. Zgardzinska, M. Zielinski, P. Moskal
abstract
This article reports on the feasibility of testing of the symmetry under reversal in time in a purely leptonic system constituted by positronium atoms using the J-PET detector. The present state of T symmetry tests is discussed with an emphasis on the scarcely explored sector of leptonic systems. Two possible strategies of searching for manifestations of T violation in non-vanishing angular correlations of final state observables in the decays of metastable triplet states of positronium available with J-PET are proposed and discussed. Results of a pilot measurement with J-PET and assessment of its performance in reconstruction of three-photon decays are shown along with an analysis of its impact on the sensitivity of the detector for the determination of T -violation sensitive observables.
Estimating the NEMA characteristics of the J-PET tomograph using the GATE package
P. Kowalski, W. Wiślicki, R.Y. Shopa, L. Raczyński, K. Klimaszewski, C. Curcenau, E. Czerwiński, K. Dulski, A. Gajos, M. Gorgol, N. Gupta-Sharma, B. Hiesmayr, B. Jasińska, Ł. Kapłon, D. Kisielewska-Kamińska, G. Korcyl, T. Kozik, W. Krzemień, E. Kubicz, M. Mohammed, S. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, J. Raj, K. Rakoczy, Z. Rudy, S. Sharma, S. Shivani, M. Silarski, M. Skurzok, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
A novel whole-body positron emission tomography (PET) system based on plastic scintillators is
developed by the J-PET Collaboration. It consists of plastic scintillator strips arranged axially in the
form of a cylinder, allowing the cost-effective construction of the total-body PET system. In order to
determine the properties of the scanner prototype and optimize its geometry, advanced computer
simulations were performed using the GATE (Geant4 application for tomographic emission)
software.
The spatial resolution, sensitivity, scatter fraction and noise equivalent count rate were estimated
according to the National Electrical Manufacturers Association norm, as a function of the length
of the tomograph, the number of detection layers, the diameter of the tomographic chamber and
for various types of applied readout. For the single-layer geometry with a diameter of 85 cm, a strip
length of 100 cm, a cross-section of 4 mm × 20 mm and silicon photomultipliers with an additional
layer of wavelength shifter as the readout, the spatial resolution (full width at half maximum) in
the centre of the scanner is equal to 3 mm (radial, tangential) and 6 mm (axial). For the analogous
double-layer geometry with the same readout, diameter and scintillator length, with a strip crosssection
of 7 mm × 20 mm, a noise equivalent count rate peak of 300 kcps was reached at 40 kBq cc?1
activity concentration, the scatter fraction is estimated to be about 35% and the sensitivity at the
centre amounts to 14.9 cps kBq?1. Sensitivity profiles were also determined.
A Method to Produce Linearly Polarized Positrons and Positronium Atoms with the J-PET Detector
M. Mohammed, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, M. Gorgol, B.C. Hiesmayr, B. Jasińska, D. Kisielewska, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, M. Pawlik-Niedźwiecka, S. Niedźwiecki, M. Pałka, L. Raczyński, J. Raj, Z. Rudy, N.G. Sharma, S. Sharma, Shivani, M. Skurzok, M. Silarski, A. Wieczorek, W. Wiślicki, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
A method for creating linearly polarized positrons and ortho-positronium (o-Ps) atoms with the J-PET detector is presented. The unique geometry and properties of the J-PET tomography enable one to design a positron source such that the quantization axis for the estimation of the linear polarization of produced o-Ps can be determined on the event by event basis in a direction of the positron motion. We intend to use 22Na or other beta+ decay isotopes as a source of polarized positrons. Due to the parity violation in the beta decay, the emitted positrons are longitudinally polarized. The choice of the quantization axis is based on the known position of the positron emitter and the reconstructed position of the positronium annihilation. We show that the J-PET tomography is equipped with all needed components.
Human Tissue Investigations Using PALS Technique - Free Radicals Influence
B. Jasińska, B. Zgardzińska, G. Chołubek, M. Pietrow, M. Gorgol, K. Wiktor, K. Wysogląd, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, B.C. Hiesmayr, B. Jodłowska-Jędrych, D. Kamińska, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, M. Mohammed, M. Pawlik-Niedźwiecka, S. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, N.G. Sharma, S. Sharma, R. Shopa, M. Silarski, M. Skurzok, A. Wieczorek, H. Wiktor, W. Wiślicki, M. Zieliński, P. Moskal
abstract
The positron annihilation lifetime spectroscopy was applied to the samples of the human uterine leiomyomas and the normal myometrium tissues taken from the selected place of the uterus during a surgery. The method indicated differences in values of the measured positron annihilation lifetime spectroscopy parameters (lifetimes and intensities) between healthy and diseased tissue samples. The additional measurements were performed either in darkness or in presence of visible light which influenced the free radicals present in both kind of tissues and, as a result, made changes in free annihilation and o-Ps decay lifetime and intensity values.
Preliminary Studies of J-PET Detector Spatial Resolution
M. Pawlik-Niedźwiecka, S. Niedźwiecki, D. Alfs, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, M. Gorgol, B. C. Hiesmayr, B. Jasińska, D. Kisielewska, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, M. Mohammed, M. Pałka, L. Raczyński, J. Raj, Z. Rudy, Shivani, M. Silarski, M. Skurzok, N.G. Sharma, S. Sharma, R.Y. Shopa, A. Strzelecki, A. Wieczorek, W. Wiślicki, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
The J-PET detector, based on long plastic scintillator strips, was recently constructed at the Jagiellonian University. It consists of 192 modules axially arranged into three layers, read out from both sides by digital constant-threshold front-end electronics. This work presents preliminary results of measurements of the spatial resolution of the J-PET tomograph performed with 22Na source placed at selected position inside the detector chamber.
Genuine Multipartite Entanglement in the 3-Photon Decay of Positronium
B.C. Hiesmayr, P. Moskal
abstract
Analysis procedure of the positronium lifetime spectra for the J-PET detector
K. Dulski , B. Zgardzińska , P. Białas , C. Curceanu E. Czerwiński , A. Gajos , B. Głowacz , M. Gorgol , B. C. Hiesmayr , B. Jasińska , D. Kisielewska-Kamińska , G. Korcyl , P. Kowalski , T. Kozik , N. Krawczyk , W. Krzemień , E. Kubicz , M. Mohammed , M. Pawlik-Niedźwiecka, S. Niedźwiecki , M. Pałka , L. Raczyński , J. Raj , Z. Rudy , N. G. Sharma, S. Sharma, Shivani, R. Y. Shopa, M. Silarski , M. Skurzok , A. Wieczorek , W. Wiślicki , M. Zieliński , P. Moskal
abstract
Positron Annihilation Lifetime Spectroscopy (PALS) has shown to be a powerful tool to study the nanostructures of porous materials. Positron Emissions Tomography (PET) are devices allowing imaging of metabolic processes e.g. in human bodies. A newly developed device, the J-PET (Jagiellonian PET), will allow PALS in addition to imaging, thus combining both analyses providing new methods for physics and medicine. In this contribution we present a computer program that is compatible with the J-PET software. We compare its performance with the standard program LT 9.0 by using PALS data from hexane measurements at different temperatures. Our program is based on an iterative procedure, and our fits prove that it performs as good as LT 9.0.
Introduction of total variation regularization into filtered backprojection algorithm
L. Raczyński, W. Wiślicki, K. Klimaszewski, W. Krzemień, P. Kowalski, R. Shopa, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski A. Gajos, B. Głowacz, M. Gorgol, B. Hiesmayr, B. Jasińska, D. Kisielewska-Kamińska, G. Korcyl, T. Kozik, N. Krawczyk, E. Kubicz, M. Mohammed, M. Pawlik-Niedźwiecka, S. Niedźwiecki, M. Pałka, Z. Rudy, N.G. Sharma, S. Sharma, M. Silarski, M. Skurzok, A. Wieczorek, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
In this paper we extend the state-of-the-art filtered backprojection (FBP) method with application of the concept of Total Variation regularization. We compare the performance of the new algorithm with the most common form of regularizing in the FBP image reconstruction via apodizing functions. The methods are validated in terms of cross-correlation coefficient between reconstructed and real image of radioactive tracer distribution using standard Derenzo-type phantom. We demonstrate that the proposed approach results in higher cross-correlation values with respect
to the standard FBP method.
Time calibration of the J-PET detector
M. Skurzok, M. Silarski, D. Alfs, P. Bialas, Shivani, C. Curceanu , E. Czerwinski , K. Dulski , A. Gajos, B. G lowacz , M. Gorgol, B. C. Hiesmayr, B. Jasinska, D. Kisielewska, G. Korcyl, P. Kowalski, T. Kozik , N. Krawczyk, W. Krzemien, E. Kubicz , M. Mohammed, M. Pawlik-Niedzwiecka, S. Niedzwiecki, M. Palka, L. Raczynski , J. Raj, Z. Rudy, N. G. Sharma, S. Sharma , R. Y. Shopa , A. Wieczorek, W. Wislicki , B. Zgardzinska, M. Zielinski, P. Moskal
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) project carried out in the Institute of Physics of the Jagiellonian University is focused on construction and tests of the first prototype of PET scanner for medical diagnostic which allows for the simultaneous 3D imaging of the whole human body using organic scintillators. The J-PET prototype consists of 192 scintillator strips forming three cylindrical layers which are optimized for the detection of photons from the electron-positron annihilation with high time- and high angular-resolutions. In this article we present time calibration and synchronization of the whole J-PET detection system by irradiating each single detection module with a 22Na source and a small detector providing common reference time for synchronization of all the modules.
Novel scintillating material 2-(4-styrylphenyl)benzoxazole for the fully digital and MRI compatible J-PET tomograph based on plastic scintillators
A. Wieczorek, K. Dulski, Sz. Niedźwiecki, D. Alfs, P. Białas, C. Curceanu, E. Czerwiński, A. Danel, A. Gajos, B. Głowacz, M. Gorgol, B. Hiesmayr, B. Jasińska, K. Kacprzak, D. Kamińska, Ł. Kapłon, A. Kochanowski, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, M. Kucharek, M. Mohammed, M. Pawlik-Niedźwiecka, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, N. G. Sharma, M. Silarski, T. Uchacz, W. Wiślicki, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
A novel
plastic
scintillator
is developed
for
the
application
in the
digital
positron
emission
tomography
(PET).
The
novelty
of the
concept
lies
in application
of the
2-(4-styrylphenyl)
benzoxazole
as
a wavelength
shifter.
The
substance
has
not
been
used
as
scintillator
dop-
ant
before.
A dopant
shifts
the
scintillation
spectrum
towards
longer
wavelengths
making
it
more
suitable
for
applications
in scintillators
of long
strips
geometry
and
light
detection
with
digital
silicon
photomultipliers.
These
features
open
perspectives
for
the
construction
of the
cost-effective
and
MRI-compatib
le PET
scanner
with
the
large
field
of view.
In this
article
we
present
the
synthesis
method
and
characterize
performance
of the
elaborated
scintillator
by
determining
its
light
emission
spectrum,
light
emission
efficiency,
rising
and
decay
time
of
the
scintillation
pulses
and
resulting
timing
resolution
when
applied
in the
positron
emission
tomography.
The
optimal
concentratio
n of the
novel
wavelength
shifter
was
established
by
maximizing
the
light
output
and
it was
found
to be
0.05
?
for
cuboidal
scintillator
with
dimen-
sions
of 14
mm
x 14
mm
x 20
mm.
Commissioning of the J-PET Detector for Studies of Decays of Positronium Atoms
E. Czerwiński, K. Dulski, P. Białas, C. Curceanu, A. Gajos, B. Głowacz, M. Gorgol, B.C. Hiesmayr, B. Jasińska, D. Kisielewska, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, N.G. Sharma, S. Sharma, R.Y. Shopa, M. Silarski, M. Skurzok, A. Wieczorek, W. Wiślicki, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is a detector for medical imaging of the whole human body as well as for physics studies involving detection of electron?positron annihilation into photons. J-PET has high angular and time resolution, and allows for measurement of spin of the positronium and the momenta and polarization vectors of annihilation quanta. In this article, we present the potential of the J-PET system for the background rejection in the decays of positronium atoms.
A New PET Diagnostic Indicator Based on the Ratio of 3gamma/2gamma Positron Annihilation
B. Jasińska, P. Moskal
abstract
The idea of applying the ratio of 3g and 2g positron annihilation rate as a diagnostic indicator in the PET imaging is proposed. It is based on the fact that the 3g annihilation is related to the decay rate of triplet state of positronium atoms produced inside the human body during the PET imaging, and it reflects the size and the concentration of free volumes present in the investigated tissues. The tissues deformation related to the cancerous changes are expected to influence the local value of the 3g fraction.
J-PET: A New Technology for the Whole-body PET Imaging
S. Niedźwiecki, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, M. Gorgol, B.C. Hiesmayr, B. Jasińska, Ł. Kapłon, D. Kisielewska-Kamińska, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, M. Mohammed, M. Pawlik-Niedźwiecka, M. Pałka, L. Raczyński, Z. Rudy, N.G. Sharma, S. Sharma, R.Y. Shopa, M. Silarski, M. Skurzok, A. Wieczorek, W. Wiślicki, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is the first PET built from plastic scintillators. J-PET prototype consists of 192 detection modules arranged axially in three layers forming a cylindrical diagnostic chamber with the inner diameter of 85 cm and the axial field-of-view of 50 cm. An axial arrangement of long strips of plastic scintillators, their small light attenuation, superior timing properties, and relative ease of the increase of the axial field-of-view opens promising perspectives for the cost effective construction of the whole-body PET scanner, as well as construction of MR and CT compatible PET inserts. Present status of the development of the J-PET tomograph will be presented and discussed.
Three-dimensional Image Reconstruction in J-PET Using Filtered Back-projection Method
R.Y. Shopa, K. Klimaszewski, P. Kowalski, W. Krzemień, L. Raczyński, W. Wiślicki, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, M. Gorgol, B. Hiesmayr, B. Jasińska, D. Kisielewska-Kamińska, G. Korcyl, T. Kozik, N. Krawczyk, E. Kubicz, M. Mohammed, M. Pawlik-Niedźwiecka, S. Niedźwiecki, M. Pałka, Z. Rudy, N.G. Sharma, S. Sharma, M. Silarski, M. Skurzok, A. Wieczorek, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
We present a method and preliminary results of the image reconstruction in the Jagiellonian PET tomograph. Using GATE (Geant4 Application for Tomographic Emission), interactions of the 511 keV photons with a cylindrical detector were generated. Pairs of such photons, flying back-to-back, originate from e+e? annihilations inside a 1 mm spherical source. Spatial and temporal coordinates of hits were smeared using experimental resolutions of the detector. We incorporated the algorithm of the 3D Filtered Back Projection, implemented in the STIR and TomoPy software packages, which differ in approximation methods. Consistent results for the Point Spread Functions of ? 5 ÷ 7 mm and ? 9 ÷ 20 mm were obtained, using STIR, for transverse and longitudinal directions, respectively, with no time-of-flight information included.
Human Tissues Investigation Using PALS Technique
B. Jasińska, B. Zgardzińska, G. Chołubek, M. Gorgol, K. Wiktor, K. Wysogląd, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, B. Hiesmayr, B. Jodłowska-Jędrych, D. Kamińska, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, M. Mohammed, M. Pawlik-Niedźwiecka, S. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, N.G. Sharma, S. Sharma, R. Shopa, M. Silarski, M. Skurzok, A. Wieczorek, H. Wiktor, W. Wiślicki, M. Zieliński, P. Moskal
abstract
Samples of uterine leiomyomatis and normal tissues taken from patients after surgery were investigated using the Positron Annihilation Lifetime Spectroscopy (PALS). Significant differences in all PALS parameters between normal and diseased tissues were observed. For all studied patients, it was found that the values of the free annihilation and ortho-positronium lifetime are larger for the tumorous tissues than for the healthy ones. For most of the patients, the intensity of the free annihilation and ortho-positronium annihilation was smaller for the tumorous than for the healthy tissues. For the first time, in this kind of studies, the 3? fraction of positron annihilation was determined to describe changes in the tissue porosity during morphologic alteration.
Human Tissues Investigation Using PALS Technique
B. Jasińska, B. Zgardzińska, G. Chołubek, M. Gorgol, K. Wiktor, K. Wysogląd, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, B.C. Hiesmayr, B. Jodłowska-Jędrych, D. Kamińska, G. Korcyl, P. Kowalski, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, M. Mohammed, M. Pawlik-Niedźwiecka, S. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, N.G. Sharma, S. Sharma, R. Shopa, M. Silarski, M. Skurzok, A. Wieczorek, H. Wiktor, W. Wiślicki, M. Zieliński, P. Moskal
abstract
Samples of uterine leiomyomatis and normal tissues taken from patients
after surgery were investigated using the Positron Annihilation Lifetime
Spectroscopy (PALS). Significant differences in all PALS parameters
between normal and diseased tissues were observed. For all studied patients,
it was found that the values of the free annihilation and orthopositronium
lifetime are larger for the tumorous tissues than for the healthy
ones. For most of the patients, the intensity of the free annihilation and
ortho-positronium annihilation was smaller for the tumorous than for the
healthy tissues. For the first time, in this kind of studies, the 3gamma fraction
of positron annihilation was determined to describe changes in the tissue
porosity during morphologic alteration.
Multichannel FPGA based MVT system for high precision time (20 ps RMS) and charge measurement
M. Palka, P. Strzempek, G. Korcyl, T. Bednarski, S. Niedzwiecki, P. Bialas, E. Czerwinski, K. Dulski, A. Gajos, B. Glowacz, M. Gorgol, B. Jasinska, D. Kaminska, M. Kajetanowicz, P. Kowalski, T. Kozik, W. Krzemien, E. Kubicz, M. Mohhamed, L. Raczynski, Z. Rudy, O. Rundel, P. Salabura, NG. Sharma, M. Silarski, J. Smyrski, A. Strzelecki, A. Wieczorek, W. Wislicki, M. Zielinski, B. Zgardzinska, P. Moskal
abstract
In this article it is presented an FPGA based Multi-Voltage Threshold (MVT) system which allows of sampling fast signals (1-2 ns rising and falling edge) in both voltage and time domain. It is possible to achieve a precision of time measurement of 20 ps RMS and reconstruct charge of signals, using a simple approach, with deviation from real value smaller than 10%. Utilization of the differential inputs of an FPGA chip as comparators together with an implementation of a TDC inside an FPGA allowed us to achieve a compact multi-channel system characterized by low power consumption and low production costs. This paper describes realization and functioning of the system comprising 192-channel TDC board and a four mezzanine cards which split incoming signals and discriminate them. The boards have been used to validate a newly developed Time-of-Flight Positron Emission Tomography system based on plastic scintillators. The achieved full system time resolution of sigma (TOF) approximate to 68 ps is by factor of two better with respect to the current TOF-PET systems.
Calculation of the time resolution of the J-PET tomograph using kernel density estimation
L. Raczyński, W. Wiślicki, W. Krzemień, P. Kowalski, D. Alfs, T. Bednarski, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, M. Gorgol, B. Hiesmayr, B. Jasińska, D. Kamińska, G. Korcyl, T. Kozik, N. Krawczyk, E. Kubicz, M. Mohammed, M. Pawlik-Niedźwiecka, S. Niedźwiecki, M. Pałka, Z. Rudy, O. Rundel, N. Gupta-Sharma, M. Silarski, J. Smyrski, A. Strzelecki, A. Wieczorek, B. Zgardzińska, M. Zieliński and P. Moskal
abstract
In this paper we estimate the time resolution of the J-PET scanner built from plastic scintillators. We incorporate the method of signal processing using the Tikhonov regularization framework and the kernel density estimation method. We obtain simple, closed-form analytical formulae for time resolution. The proposed method is validated using signals registered by means of the single detection unit of the J-PET tomograph built from a 30?cm long plastic scintillator strip. It is shown that the experimental and theoretical results obtained for the J-PET scanner equipped with vacuum tube photomultipliers are consistent.
Measurement of gamma quantum interaction point in plastic scintillator with WLS strips
J. Smyrski, D. Alfs, T. Bednarski, P. Białas, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, N. Gupta-Sharma, M. Gorgol, B. Jasińska, M. Kajetanowicz, D. Kamińska, G. Korcyl, P. Kowalski, W. Krzemień, N. Krawczyk, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, P. Salabura, M. Silarski, A. Strzelecki, A. Wieczorek, W. Wiślicki, J. Wojnarska, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
The feasibility of measuring the aśxial coordinate of a gamma quantum interaction point in a plastic scintillator
bar via the detection of scintillation photons escaping from the scintillator with an array of wavelength-shifting
(WLS) strips is demonstrated. Using a test set-up comprising a BC-420 scintillator bar and an array of sixteen
BC-482A WLS strips we achieved a spatial resolution of 5 mm (?) for annihilation photons from a 22Na isotope.
The studied method can be used to improve the spatial resolution of a plastic-scintillator-based PET scanner
which is being developed by the J-PET collaboration.
J-PET: A Novel TOF -PET scanner using Organic Scintillators
N.G. Sharma, M. Silarski, D. Alfs, T. Bednarski, P. Białas, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, M. Gorgol, B. Jasińska, D. Kamińska, G. Korcyl, P. Kowalski, W. Krzemień, N. Krawczyk, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, O. Rundel, A. Wieczorek, W. Wislicki, M. Zieliński, B. Zgardzińska, P. Moskal
abstract
Positron Emission Tomography (PET) is one of the most advanced nuclear medicine imaging techniques that
have potential to identify many diseases (like cancers, heart diseases, neurological disorders and other abnormalities) in vivo in the earliest stages. However, production of PET modalities for covering the whole human body is economically unrealistic when applying the current technologies. In order to achieve a goal of more economical PET scanner with large geometrical acceptance and improved time resolution, the Jagiellonian Positron Emission Tomography (J-PET) Collaboration is realizing a new project aiming at construction of TOF-PET detector using plastic scintillators instead of crystals. Novelty of the J-PET scanner lies in: (i) application of plastic scintillators as well as in (ii) its front-end electronics which allows signal sampling in voltage domain, (iii) a trigger-less data acquisition system, and (iv) the new time and hit-position reconstruction methods. Moreover, the proposed solution enables to increase the axial field-of-view of the tomograph by extending the length of the plastic scintillator strips without changing the number of photomultipliers and electronic channels.
A feasibility study of ortho-positronium decays measurement with the J-PET scanner based on plastic scintillators
D. Kamińska, A. Gajos, E. Czerwiński, D. Alfs, T. Bednarski, P. Białas, C. Curceanu, K. Dulski, B. Głowacz, N. Gupta-Sharma, M. Gorgol, B. C. Hiesmayr, B. Jasińska, G. Korcyl, P. Kowalski, W. Krzemień, N. Krawczyk, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, M. Silarski, A. Wieczorek, W. Wiślicki, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
We present a study of the application of the Jagiellonian Positron Emission Tomograph (J-PET) for the registration of gamma quanta from decays of ortho-positronium (o-Ps). The J-PET is the first positron emission tomography scanner based on organic scintillators in contrast to all current PET scanners based on inorganic crystals. Monte Carlo simulations show that the J-PET as an axially symmetric and high acceptance scanner can be used as a multi-purpose detector well suited to pursue research including e.g. tests of discrete symmetries in decays of ortho-positronium in addition
to the medical imaging. The gamma quanta originating from o-Ps decay interact in the plastic scintillators predominantly via the Compton effect, making the direct measurement of their energy impossible. Nevertheless, it is shown in this paper that the J-PET scanner will enable studies of the o-Ps->3g decays with angular and energy resolution equal to sigma(theta) = 0.4^{circ} and sigma(E) = 4.1 keV, respectively. An order of magnitude shorter decay time of signals from plastic scintillators with respect to the inorganic crystals results not only in better timing properties crucial for the reduction of physical and instrumental background, but also suppresses significantly the pileups, thus enabling compensation of the lower efficiency of the plastic scintillators by performing measurements with higher positron source activities.
Determination of the 3gamma Fraction from Positron Annihilation in Mesoporous Materials for Symmetry Violation Experiment with J-PET Scanner
B. Jasińska, M. Gorgol, M. Wiertel, R. Zaleski, D. Alfs, T. Bednarski, P. Białas, E. Czerwiński, K. Dulski, A. Gajos B. Głowacz, D. Kamińska, Ł. Kapłon, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, N.G. Sharma, M. Silarski, A. Słomski, A. Strzelecki, A. Wieczorek, W. Wiślicki, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
Various mesoporous materials were investigated to choose the best material for experiments requiring high yield of long-lived positronium. We found that the fraction of 3? annihilation determined using ?-ray energy spectra and positron annihilation lifetime spectra (PAL) changed from 20% to 25%. The 3? fraction and o-Ps formation probability in the polymer XAD-4 is found to be the largest. Elemental analysis performed using scanning electron microscope (SEM) equipped with energy-dispersive X-ray spectroscope EDS shows high purity of the investigated materials.
Sampling FEE and Trigger-less DAQ for the J-PET Scanner
G. Korcyl, D. Alfs, T. Bednarski, P. Białas, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, B. Jasińska, D. Kamińska Ł. Kapłon, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, O. Rundel, N.G. Sharma, M. Silarski, A. Słomski, K. Stoła, A. Strzelecki, A. Wieczorek, W. Wiślicki, B.K. Zgardzińska, M. Zieliński, P. Moskal
abstract
In this paper, we present a complete Data Acquisition System (DAQ) together with the readout mechanisms for the J-PET tomography scanner. In general, detector readout chain is constructed out of Front-End Electronics (FEE) measurement devices such as Time-to-Digital or Analog-to-Digital Converters (TDCs or ADCs), data collectors and storage. We have developed a system capable for maintaining continuous readout of digitized data without preliminary selection. Such operation mode results in up to 8 Gbps data stream, therefore, it is required to introduce a dedicated module for on-line event building and feature extraction. The Central Controller Module, equipped with Xilinx Zynq SoC and 16 optical transceivers, serves as such true real time computing facility. Our solution for the continuous data recording (trigger-less) is a novel approach in such detector systems and assures that most of the information is preserved on the storage for further, high-level processing. Signal discrimination applies a unique method of using LVDS buffers located in the FPGA fabric.
Beam Profile Investigation of the New Collimator System for the J-PET Detector
E. Kubicz, M. Silarski, A. Wieczorek, D. Alfs, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, B. Głowacz, B. Jasińska D. Kamińska, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, M. Mohammed, I. Moskal, S. Niedźwiecki, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, A. Strzelecki, W. Wiślicki, M. Zieliński, B. Zgardzińska, P. Moskal
abstract
Jagiellonian Positron Emission Tomograph (J-PET) is a multi-purpose detector which will be used for search for discrete symmetries violations in the decays of positronium atoms and for investigations with positronium atoms in life-sciences and medical diagnostics. In this article, we present three methods for determination of the beam profile of collimated annihilation gamma quanta. Precise monitoring of this profile is essential for time and energy calibration of the J-PET detector and for the determination of the library of model signals used in the hit-time and hit-position reconstruction. We have shown that usage of two lead bricks with dimensions of 5 × 10 × 20 cm3 enables to form a beam of annihilation quanta with Gaussian profile characterized by 1 mm FWHM. Determination of this characteristic is essential for designing and construction the collimator system for the 24-module J-PET prototype. Simulations of the beam profile for different collimator dimensions were performed. This allowed us to choose optimal collimation system in terms of the beam profile parameters, dimensions and weight of the collimator taking into account the design of the 24-module J-PET detector.
Scatter Fraction of the J-PET Tomography Scanner
P. Kowalski, W. Wiślicki, L. Raczyński, D. Alfs, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, B. Głowacz, J. Jasińska D. Kamińska, G. Korcyl, T. Kozik, W. Krzemień, E. Kubicz, M. Mohammad, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, Z. Rudy, M. Silarski, A. Wieczorek, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
A novel Positron Emission Tomography system, based on plastic scintillators, is being developed by the J-PET Collaboration. In this article, we present the simulation results of the scatter fraction, representing one of the parameters crucial for background studies defined in the NEMA-NU-2-2012 norm. We elaborate an event selection methods allowing to suppress events in which gamma quanta were scattered in the phantom or underwent the multiple scattering in the detector. The estimated scatter fraction for the single-layer J-PET scanner varies from 37% to 53% depending on the applied energy threshold.
Application of the compress sensing theory for improvement of the TOF resolution in a novel J-PET instrument
L. Raczyński, P. Moskal, P. Kowalski, W. Wiślicki, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, T. Kozik, W. Krzemień, E. Kubicz, Sz. Niedźwiecki, M. Pałka, Z. Rudy, P. Salabura, N. Gupta-Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, A. Wieczorek, M. Zieliński, N. Zoń
abstract
Trilateration-based reconstruction of ortho-positronium decays into three photons with the J-PET detector
A. Gajos, D. Kamińska, E. Czerwiński, D. Alfs, T. Bednarski, P. Białas, B. Głowacz, M. Gorgol, B. Jasińska, Ł. Kapłon, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, O. Rundel, N.G. Sharma, M. Silarski, A. Słomski, A. Strzelecki, A. Wieczorek, W. Wiślicki, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
This work reports on a new reconstruction algorithm allowing us to reconstruct the decays of ortho-positronium atoms into three photons using the places and times of photons recorded in the detector. The method is based on trilateration and allows for a simultaneous reconstruction of both location and time of the decay. Results of resolution tests of the new reconstruction in the J-PET detector based on Monte Carlo simulations are presented, which yield a spatial resolution at the level of 2 cm (FWHM) for X and Y and at the level of 1 cm (FWHM) for Z available with the present resolution of J-PET after application of a kinematic fit. Prospects of employment of this method for studying angular correlations of photons in decays of polarized ortho-positronia for the needs of tests of CP and CPT discrete symmetries are also discussed. The new reconstruction method allows for discrimination of background from random three-photon coincidences as well as for application of a novel method for determination of the linear polarization of ortho-positronium atoms, which is also introduced in this work.
Time resolution of the plastic scintillator strips with matrix photomultiplier readout for J-PET tomograph
P. Moskal, O. Rundel, D. Alfs, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, K. Giergiel, M. Gorgol, B. Jasińska, D. Kamińska, Ł. Kapłon, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, Sz. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, N.G. Sharma, A. Słomski, M. Silarski, A. Strzelecki, A. Wieczorek, W. Wiślicki, P. Witkowski, M. Zieliński, N. Zoń
abstract
Recent tests of a single module of the Jagiellonian Positron Emission
Tomography system (J-PET) consisting of 30 cm long plastic scintillator
strips have proven its applicability for the detection of annihilation quanta
(0.511 MeV) with a coincidence resolving time (CRT) of 0.266 ns. The
achieved resolution is almost by a factor of two better with respect to the
current TOF-PET detectors and it can still be improved since, as it is shown
in this article, the intrinsic limit of time resolution for the determination of
time of the interaction of 0.511 MeV gamma quanta in plastic scintillators
is much lower. As the major point of the article, a method allowing to
record timestamps of several photons, at two ends of the scintillator strip,
by means of matrix of silicon photomultipliers (SiPM) is introduced. As a
result of simulations, conducted with the number of SiPM varying from 4 to 42, it is shown that the improvement of timing resolution saturates with
the growing number of photomultipliers, and that the 2×5 configuration at
two ends allowing to read twenty timestamps, constitutes an optimal solution.
The conducted simulations accounted for the emission time distribution,
photon transport and absorption inside the scintillator, as well as quantum
efficiency and transit time spread of photosensors, and were checked based on
the experimental results. Application of the 2×5 matrix of SiPM allows for
achieving the coincidence resolving time in positron emission tomography of
0.170 ns for 15 cm axial field-of-view (AFOV) and 0.365 ns for 100 cm
AFOV. The results open perspectives for construction of a cost-effective TOFPET
scanner with significantly better TOF resolution and larger AFOV with
respect to the current TOF-PET modalities.
Overview of the software architecture and data flow for the J-PET tomography device
W. Krzemień, D. Alfs, P. Białas, E. Czerwiński, A. Gajos, B. Głowacz, B. Jasińska, D. Kamińska, G. Korcyl, P. Kowalski, T. Kozik, E. Kubicz, Sz. Niedźwiecki, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, M. Silarski, A. Strzelecki, A. Wieczorek, W. Wiślicki, M. Zieliński, P. Moskal
abstract
Modern TOF-PET scanner systems require high-speed computing resources for efficient data processing, monitoring and image reconstruction. In this article we present the data flow and software architecture for the novel TOF-PET scanner developed by the J-PET collaboration. We discuss the data acquisition system, reconstruction framework and some image reconstruction issues. Also, the concept of computing outside hospitals in the remote centers such as 'Swierk Computing Centre in Poland is presented
Potential of the J-PET Detector for Studies of Discrete Symmetries in Decays of Positronium Atom - a Purely Leptonic System
P. Moskal, D. Alfs, T. Bednarski, P. Białas, E. Czerwinski, C. Curceanu, A. Gajos, B. Głowacz, M. Gorgol, B.C. Hiesmayr, B. Jasinska, D. Kaminska, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemien , N. Krawczyk, E. Kubicz, M. Mohammed, Sz. Niedzwiecki, M. Pawlik-Niedzwiecka, L. Raczynski, Z. Rudy, M. Silarski, A. Wieczorek, W. Wislicki, M. Zielinski
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) was constructed
as a prototype of the cost-effective scanner for the simultaneous
metabolic imaging of the whole human body. Being optimized for the detection
of photons from the electron?positron annihilation with high timeand
high angular-resolution, it constitutes a multi-purpose detector providing
new opportunities for studying the decays of positronium atoms.
Positronium is the lightest purely leptonic object decaying into photons.
As an atom bound by a central potential, it is a parity eigenstate, and
as an atom built out of an electron and an anti-electron, it is an eigenstate
of the charge conjugation operator. Therefore, the positronium is
a unique laboratory to study discrete symmetries whose precision is limited,
in principle, by the effects due to the weak interactions expected at the level of (10????14) and photon?photon interactions expected at the
level of (10????9). The J-PET detector enables to perform tests of discrete
symmetries in the leptonic sector via the determination of the expectation
values of the discrete-symmetries-odd operators, which may be constructed
from the spin of ortho-positronium atom and the momenta and polarization
vectors of photons originating from its annihilation. In this article, we
present the potential of the J-PET detector to test the C, CP, T and CPT
symmetries in the decays of positronium atoms.
Searches for discrete symmetries violation in ortho-positronium decay using the J-PET detector
D. Kamińska, A. Gajos, E. Czerwiński, T. Bednarski, P. Białas, M. Gorgol, B. Jasińska, Ł. Kapłon, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, S. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, N. Gupta-Sharma, M. Silarski, A. Słomski, A. Strzelecki, A. Wieczorek, W. Wiślicki, M. Zieliński, B. Zgardzińska, P. Moskal
abstract
In this paper, we present prospects for using the Jagiellonian positron emission tomograph (J-PET)
detector to search for discrete symmetries violations in a purely leptonic system of the positronium atom. We
discuss tests of CP and CPT symmetries by means of ortho-positronium decays into three photons. No zero
expectation values for chosen correlations between ortho-positronium spin and momentum vectors of photons
would imply the existence of physics phenomena beyond the standard model. Previous measurements resulted
in violation amplitude parameters for CP and CPT symmetries consistent with zero, with an uncertainty of
about 10?3. The J-PET detector allows to determine those values with better precision, thanks to the unique
time and angular resolution combined with a high geometrical acceptance. Achieving the aforementioned is possible
because of the application of polymer scintillators instead of crystals as detectors of annihilation quanta.
Studies of unicellular microorganisms Saccharomyces cerevisiae by means of positron annihilation lifetime spectroscopy
E. Kubicz, B. Jasińska, B. Zgardzińska, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, M. Gorgol, D. Kamińska, Ł. Kapłon, A. Kochanowski, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, S. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rajfur, Z. Rudy, O. Rundel, N. Gupta-Sharma, M. Silarski, A. Słomski, A. Strzelecki, A. Wieczorek, W. Wiślicki, M. Zieliński, P. Moskal
abstract
Results of positron annihilation lifetime spectroscopy (PALS) and microscopic studies on simple microorganisms,
brewing yeasts, are presented. Lifetime of ortho-positronium (o-Ps) were found to change from 2.4 to 2.9 ns
(longer-lived component) for lyophilized and aqueous yeasts, respectively. Also hygroscopicity of yeasts in time was
examined, allowing to check how water ? the main component of the cell ? affects PALS parameters, thus lifetime
of o-Ps were found to change from 1.2 to 1.4 ns (shorter-lived component) for the dried yeasts. The time suffi cient
to hydrate the cells was found below 10 hours. In the presence of liquid water, an indication of reorganization of
yeast in the molecular scale was observed. Microscopic images of the lyophilized, dried, and wet yeasts with best
possible resolution were obtained using inverted microscopy (IM) and environmental scanning electron microscopy
(ESEM) methods. As a result, visible changes to the surface of the cell me mbrane were observed in ESEM images.
Reconstruction of hit time and hit position of annihilation quanta in the J-PET detector usi ng the Mahalanobis distance
N. G. Sharma, M. Silarski, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, M. Gorgol, B. Jasińska, D. Kamińska, Ł. Kapłon, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, Sz. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, A. Słomski, A. Strzelecki, A. Wieczorek, W. Wiślicki, M. Zieliński, B. Zgardzińska, P. Moskal
abstract
The J-PET detector being developed at Jagiellonian University, is a Positron Emission Tomograph composed of the long strips of polymer scintillators. At the same time it is a detector system which will be used for studies of the decays of positronium atoms. The shape of photomultiplier signals depends on the hit-time and hit-position of the gamma quantum. In order to take advantage of this fact a dedicated sampling front-end electronics which enables to sample signals in voltage domain with the time precision of about 20 ps and novel reconstruction method based on the comparison of examined signal with the model signals stored in the library has been developed. As a measure of the similarity we use the Mahalanobis distance. The achievable position and time-resolution depends on number and values of the threshold levels at which the signal is sampled. A reconstruction method, as well as preliminary results are presented and discussed.
PALS investigations of free volumes thermal expansion of J-PET plastic scintillator synthesized in polystyrene matrix
A. Wieczorek, B. Zgardzińska, B. Jasińska, M. Gorgol, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, D. Kamińska, Ł. Kapłon, A. Kochanowski, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, Sz. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, N.G. Sharma, M. Silarski, A. Słomski, A. Strzelecki, W. Wiślicki, M. Zieliński, P. Moskal
abstract
The polystyrene dopped with 2,5-diphenyloxazole as a primary fluor and 2-(4-styrylphenyl)benzoxazole as a wavelength shifter, prepared as a plastic scintillator was investigated using positronium probe in wide range of temperatures from 123 to 423 K. Three structural transitions at 260 K, 283 K and 370 K were found in the material. In the o-Ps intensity dependence on temperature, the significant hysteresis is observed. Heated to 370 K, the material exhibits the o-Ps intensity variations in time.
Processing optimization with parallel computing for the J-PET scanner
W. Krzemień, M. Bała, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, M. Gorgol, B. Jasińska, D. Kamińska, Ł. Kapłon, G. Korcyl, P. Kowalski, T. Kozik, E. Kubicz, Sz. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, N.G. Sharma, M. Silarski, A. Słomski, K. Stola, A. Strzelecki, D. Trybek, Anna Wieczorek, W. Wiślicki, M. Zieliński, B. K. Zgardzińska, P. Moskal
abstract
The Jagiellonian-PET (J-PET) collaboration is developing a prototype TOF-PET detector based on long polymer scintillators. This novel approach exploits the excellent time properties of the plastic scintillators, which permit very precise time measurements. The very fast, FPGA-based front-end electronics and the data acquisition system, as well as, low- and high-level reconstruction algorithms were specially developed to be used with the J-PET scanner. The TOF-PET data processing and reconstruction are time and resource demanding operations, especially in case of a large acceptance detector, which works in triggerless data acquisition mode. In this article, we discuss the parallel computing methods applied to optimize the data processing for the J-PET detector. We begin with general concepts of parallel computing and then we discuss several applications of those techniques in the J-PET data processing.
Multiple Scattering and Accidental Coincidences in the J-PET Detector Simulated Using GATE Package
P. Kowalski, P. Moskal, W. Wislicki, L. Raczynski, T. Bednarski, P. Bialas, J. Bulka, E. Czerwinski, A. Gajos, A. Gruntowski, D. Kaminska, L. Kaplon, A. Kochanowski, G. Korcyl, J. Kowal, T. Kozik, W. Krzemien, E. Kubicz, S. Niedzwiecki, M. Palka, Z. Rudy, P. Salabura, NG. Sharma, M. Silarski, A. Slomski, J. Smyrski, A. Strzelecki, A. Wieczorek, I. Wochlik, M. Zielinski, N. Zon
abstract
Novel positron emission tomography system, based on plastic scintillators, is developed by the J-PET collaboration. In order to optimize geometrical configuration of built device, advanced computer simulations are performed. Detailed study is presented of background given by accidental coincidences and multiple scattering of gamma quanta.
A pilot study of the novel J-PET plastic scintillator with 2-(4-styrylphenyl)benzoxazole as a wavelength shifter
A. Wieczorek, P. Moskal, Sz. Niedźwiecki, T. Bednarski, P. Białas, E. Czerwiński, A. Danel, A. Gajos, A. Gruntowski, D. Kamińska, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, M. Molenda, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, T. Uchacz, W. Wiślicki, M. Zieliński, N. Zoń
abstract
For the first time a molecule of 2-(4-styrylphenyl)benzoxazole containing benzoxazole and stilbene groups is applied as a scintillator dopant acting as a wavelength shifter. In this article a light yield of the plastic scintillator, prepared from styrene doped with 2 wt% of 2,5-diphenylbenzoxazole and 0.03 wt% of 2-(4-styrylphenyl)benzoxazole, is determined to be as large as 60% ? 2% of the anthracene light output. There is a potential to improve this value in the future by the optimization of the additives concentrations.
Compressive sensing of signals generated in plastic scintillators in a novel J-PET instrument
L. Raczyński, P. Moskal, P. Kowalski, W. Wiślicki, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, T. Kozik, W. Krzemień, E. Kubicz, Sz. Niedźwiecki, M. Pałka, Z. Rudy, O. Rundel, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, A. Wieczorek, M. Zieliński, N. Zoń
abstract
The J-PET scanner, which allows for single bed imaging of the whole human body, is currently under development at the Jagiellonian University. The discussed detector offers improvement of the Time of Flight (TOF) resolution due to the use of fast plastic scintillators and dedicated electronics allowing for sampling in the voltage domain of signals with durations of few nanoseconds. In this paper we show that recovery of the whole signal, based on only a few samples, is possible. In order to do that, we incorporate the training signals into the Tikhonov regularization framework and we perform the Principal Component Analysis decomposition, which is well known for its compaction properties. The method yields a simple closed form analytical solution that does not require iterative processing. Moreover, from the Bayes theory the properties of regularized solution, especially its covariance matrix, may be easily derived. This is the key to introduce and prove the formula for calculations of the signal recovery error. In this paper we show that an average recovery error is approximately inversely proportional to the number of acquired samples.
Analysis framework for the J-PET scanner
W. Krzemień, A. Gajos, A. Gruntowski, K. Stola, D. Trybek, T. Bednarski, P. Białas, E. Czerwiński, D. Kamińska, L. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, E. Kubicz, P. Moskal, Sz. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, P. Salabura, N. G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, A. Wieczorek, W. Wiślicki, M. Zieliński, N. Zoń
abstract
J-PET analysis framework is a flexible, lightweight, ROOT-based software package which provides the tools to develop reconstruction and calibration procedures for PET tomography. In this article we present the implementation of the full data-processing chain in the J-PET framework which is used for the data analysis of the J-PET tomography scanner. The Framework incorporates automated handling of PET setup parameters' database as well as high level tools for building data reconstruction procedures. Each of these components is briefly discussed.
Hit time and hit position reconstruction in the J-PET detector based on a library of averaged model signals
P. Moskal, N.G.Sharma, M.Silarski, T. Bednarski, P. Białas, J. Bułka, E. Czerwiński, A. Gajos, D. Kamińska, L. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, Sz. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, P. Salabura, A. Słomski, J. Smyrski, A. Strzelecki, A. Wieczorek, W. Wiślicki, I. Wochlik, M. Zieliński, N. Zoń
abstract
n this article we present a novel method of hit time and hit position reconstruction in long scintillator detectors. We take advantage of the fact that for this kind of detectors amplitude and shape of registered signals depends strongly on the position where particle hit the detector. The reconstruction is based on determination of the degree of similarity between measured and averaged signals stored in a library for a set of well-defined positions along the scintillator. Preliminary results of validation of the introduced method with experimental data obtained by means of the double strip prototype of the J-PET detector are presented.
GPU accelerated image reconstruction in a two-strip J-PET tomograph
P. Białas, J. Kowal, A. Strzelecki, T. Bednarski, E. Czerwiński, A. Gajos, D. Kamińska, Ł. Kapłon, A. Kochanowski, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, P. Moskal, Sz. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Wieczorek, W. Wiślicki, M. Zieliński, N. Zoń
abstract
We present a fast GPU implementation of the image reconstruction routine, for a novel two strip PET detector that relies solely on the time of flight measurements.
A novel method for the line-of-response and time-of-flight reconstruction in TOF-PET detectors based on a library of synchronized model signals
P. Moskal, N. Zoń, T. Bednarski, P. Białas, E. Czerwiński, A. Gajos, D. Kamińska, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, Sz. Niedźwiecki, M. Pałka, L. Raczyński, Z. Rudy, O. Rundel, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, A. Wieczorek, W. Wiślicki, M. Zieliński
abstract
A novel method of hit time and hit position reconstruction in scintillator detectors is described. The method is based on comparison of detector signals with results stored in a library of synchronized model signals registered for a set of well-defined positions of scintillation points. The hit position is reconstructed as the one corresponding to the signal from the library which is most similar to the measurement signal. The time of the interaction is determined as a relative time between the measured signal and the most similar one in the library. A degree of similarity of measured and model signals is defined as the distance between points representing the measurement- and model-signal in the multi-dimensional measurement space. Novelty of the method lies also in the proposed way of synchronization of model signals enabling direct determination of the difference between time-of-flights (TOF) of annihilation quanta from the annihilation point to the detectors. The introduced method was validated using experimental data obtained by means of the double strip prototype of the J-PET detector and 22Na sodium isotope as a source of annihilation gamma quanta.The detector was built out from plastic scintillator strips with dimensions of 5 mm x 19 mm x 300 mm, optically connected at both sides to photomultipliers,from which signals were sampled by means of the Serial Data Analyzer.Using the introduced method, the spatial and TOF resolution of about 1.3 cm (?) and 125 ps (?) were established, respectively.
Test of a single module of the J-PET scanner based on plastic scintillators
P. Moskal, Sz. Niedźwiecki, T. Bednarski, E. Czerwiński, Ł. Kapłon, E. Kubicz, I. Moskal, M. Pawlik-Niedźwiecka, N.G. Sharma, M. Silarski, M. Zieliński, N. Zoń, P. Białas, A. Gajos, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, M. Pałka, L. Raczyński, Z. Rudy, P. Salabura, A. Słomski, J. Smyrski, A. Strzelecki, A. Wieczorek, W. Wiślicki
abstract
Time of Flight Positron Emission Tomography scanner based on plastic scintillators is being developed at the Jagiellonian University by the J-PET collaboration. The main challenge of the conducted research lies in the elaboration of a method allowing application of plastic scintillators for the detection of low energy gamma quanta. In this article we report on tests of a single detection module built out from BC-420 plastic scintillator strip (with dimensions of 5x19x300mm^3) read out at two ends by Hamamatsu R5320 photomultipliers. The measurements were performed using collimated beam of annihilation quanta from the 68Ge isotope and applying the Serial Data Analyzer (Lecroy SDA6000A) which enabled sampling of signals with 50ps intervals. The time resolution of the prototype module was established to be better than 80ps (sigma) for a single level discrimination. The spatial resolution of the determination of the hit position along the strip was determined to be about 0.93cm (sigma) for the annihilation quanta. The fractional energy resolution for the energy E deposited by the annihilation quanta via the Compton scattering amounts to sigma(E)/E = 0.044/sqrt(E[MeV]) and corresponds to the sigma(E)/E of 7.5% at the Compton edge.
Novel method for hit-position reconstruction using voltage signals in plastic scintillators and its application to Positron Emission Tomography
L. Raczyński, P. Moskal, P. Kowalski, W. Wiślicki, T. Bednarski, P. Białas, E. Czerwiński, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, T. Kozik, W. Krzemień, E. Kubicz, M. Molenda, I. Moskal, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, Z. Rudy, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, A. Wieczorek, M. Zieliński, N. Zoń
abstract
Currently inorganic scintillator detectors are used in all commercial Time of Flight Positron Emission Tomograph (TOF-PET) devices. The J-PET collaboration investigates a possibility of construction of a PET scanner from plastic scintillators which would allow for single bed imaging of the whole human body. This paper describes a novel method of hit-position reconstruction based on sampled signals and an example of an application of the method for a single module with a 30 cm long plastic strip, read out on both ends by Hamamatsu R4998 photomultipliers. The sampling scheme to generate a vector with samples of a PET event waveform with respect to four user-defined amplitudes is introduced. The experimental setup provides irradiation of a chosen position in the plastic scintillator strip with an annihilation gamma quanta of energy 511 keV. The statistical test for a multivariate normal (MVN) distribution of measured vectors at a given position is developed, and it is shown that signals sampled at four thresholds in a voltage domain are approximately normally distributed variables. With the presented method of a vector analysis made out of waveform samples acquired with four thresholds, we obtain a spatial resolution of about 1 cm and a timing resolution of about 80 ps (sigma).
Computing support for advanced medical data analysis and imaging
W. Wiślicki, T. Bednarski, P. Białas, E. Czerwiński, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, P. Moskal, S. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, A. Wieczorek, M. Zieliński, N. Zoń
abstract
We discuss computing issues for data analysis and image reconstruction of PET-TOF medical scanner or other medical scanning devices producing large volumes of data. Service architecture based on the grid and cloud concepts for distributed processing is proposed and critically discussed.
A novel method based solely on FPGA units enabling measurement of time and charge of analog signals in Positron Emission Tomography
M. Pałka, T. Bednarski, P. Białas, E. Czerwiński, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, P. Moskal, Sz. Niedźwiecki, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, W. Wiślicki, M. Zieliński, N. Zoń
abstract
This article presents a novel technique for precise measurement of time and charge based solely on FPGA (Field Programmable Gate Array) device and few satellite discrete electronic components used in Positron Emission Tomography (PET). Described approach simplifies electronic circuits, reduces the power consumption, lowers costs, merges front-end electronics with digital electronics and also makes more compact final design. Furthermore, it allows to measure time when analog signals cross a reference voltage at different threshold levels with a very high precision of ? 10ps (rms) and thus enables sampling of signals in a voltage domain.
A novel method for calibration and monitoring of time synchronization of TOF-PET scanners by means of cosmic rays
M. Silarski, E. Czerwiński, T. Bednarski, P. Moskal, P. Białas, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N.G. Sharma, A. Słomski, J. Smyrski, A. Strzelecki, W. Wiślicki, M. Zieliński, N. Zoń
abstract
All of the present methods for calibration and monitoring of TOF-PET scanner detectors utilize radioactive isotopes such as e.g. 22Na or 68Ge, which are placed or rotate inside the scanner. In this article we describe a novel method based on the cosmic rays application to the PET calibration and monitoring methods. The concept allows to overcome many of the drawbacks of the present methods and it is well suited for newly developed TOF-PET scanners with a large longitudinal field of view. The method enables also monitoring of the quality of the scintillator materials and in general allows for the continuous quality assurance of the PET detector performance.
3D PET image reconstruction based on the maximum likelihood estimation method (MLEM) algorithm
A. Słomski, Z. Rudy, T. Bednarski, P. Białas, E. Czerwiński, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, P. Moskal, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, P. Salabura, N. G. Sharma, M. Silarski, J. Smyrski, A. Strzelecki, W. Wiślicki, M. Zieliński, N. Zoń
abstract
A positron emission tomography (PET) scan does not measure an image directly. Instead, a PET scan measures a sinogram at the boundary of the field-of-view that consists of measurements of the sums of all the counts along the lines connecting the two detectors. Because there is a multitude of detectors built in a typical PET structure, there are many possible detector pairs that pertain to the measurement. The problem is how to turn this measurement into an image (this is called imaging). Significant improvement in PET image quality was achieved with the introduction of iterative reconstruction techniques. This was realized approximately 20 years ago (with the advent of new powerful computing processors). However, three-dimensional imaging still remains a challenge. The purpose of the image reconstruction algorithm is to process this imperfect count data for a large number (many millions) of lines of response and millions of detected photons to produce an image showing the distribution of the labeled molecules in space.
Trigger-less and reconfigurable data acquisition system for positron emission tomography
G. Korcyl, P. Moskal, T. Bednarski, P. Białas, E. Czerwiński, Ł. Kapłon, A. Kochanowski, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N. G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, W. Wiślicki, M. Zieliński, N. Zoń
abstract
This article is focused on data acquisition system (DAQ) designed especially to be used in positron emission tomography (PET) or single-photon emission computed tomography. The system allows for continuous registration of analog signals during measurement. It has been designed to optimize registration and processing of the information carried by signals from the detector system in PET scanner. The processing does not require any rejection of data with a trigger system. The proposed system possesses also an ability to implement various data analysis algorithms that can be performed in real time during data collection.
Determination of the map of efficiency of the Jagiellonian Positron Emission Tomograph (J-PET) detector with the GATE package
P. Kowalski, L. Raczyński, T. Bednarski, P. Białas, E. Czerwiński, K. Giergiel, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, T. Kozik, W. Krzemień, M. Molenda, I. Moskal, P. Moskal, Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, Z. Rudy, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, K. Szymański, W. Wiślicki, P. Witkowski, M. Zieliński, N. Zoń
abstract
A novel PET detector consisting of strips of polymer scintillators is being developed by the J-PET Collaboration. The map of efficiency and the map of geometrical acceptance of the 2-strip J-PET scanner are presented. Map of efficiency was determined using the Monte Carlo simulation software GATE based on GEANT4. Both maps were compared using method based on the chi2 test.
Plastic scintillators for positron emission tomography obtained by the bulk polymerization method
Ł. Kapłon, A. Kochanowski, M. Molenda, P. Moskal, A. Wieczorek, T. Bednarski, P. Białas, E. Czerwiński, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N. G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, W. Wiślicki, M. Zieliński, N. Zoń
abstract
This paper describes three methods regarding the production of plastic scintillators. One method appears to be suitable for the manufacturing of plastic scintillators, revealing properties which fulfill the requirements of novel positron emission tomography scanners based on plastic scintillators. The key parameters of the manufacturing process are determined and discussed.
J-PET analysis framework for the prototype TOF-PET detector
W. Krzemień, M. Silarski, K. Stola, D. Trybek, T. Bednarski, P. Białas, E. Czerwiński, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, M. Molenda, P. Moskal, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N.G. Sharma, A. Słomski, J. Smyrski, A. Strzelecki, W. Wiślicki, M. Zieliński, N. Zoń
abstract
Novel TOF-PET scanner solutions demand, apart from the state of the art detectors, software for fast processing of the gathered data, monitoring of the whole scanner and reconstruction of the PET image. In this article we present an analysis framework for the novel STRIP-PET scanner developed by the J-PET collaboration in the Institute of Physics of the Jagiellonian University. This software is based on the ROOT package used in many particle physics experiments.
Database and data structure for the novel TOF-PET detector developed for J-PET project
E. Czerwiński, M. Zieliński, T. Bednarski, P. Białas, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, M. Molenda, P. Moskal, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N. G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, A. Wieczorek, W.Wiślicki, N. Zoń
abstract
The complexity of the hardware and the amount of data collected during the PET imaging process require application of modern methods of efficient data organization and processing. In this article we will discuss the data structures and the flow of collected data from the novel TOF-PET medical scanner which is being developed at the Jagiellonian University. The developed data format reflects: registration process of the gamma quanta emitted from positron-electron annihilation, Front-End Electronic (FEE) structure and required input information for the image reconstruction. In addition, the system database fulfills possible demands of the evolving J-PET project.
Calibration of photomultipliers gain used in the J-PET detector
T. Bednarski, E. Czerwiński, P. Moskal, P. Białas, K. Giergiel, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, I. Moskal, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, K. Szymański, W. Wiślicki, P. Witkowski, M. Zieliński, N. Zoń
abstract
Photomultipliers are commonly used in commercial PET scanner as devices which convert light produced in scintillator by gamma quanta from positron-electron annihilation into electrical signal. For proper analysis of obtained electrical signal, a photomultiplier gain curve must be known, since gain can be significantly different even between photomultipliers of the same model. In this article we describe single photoelectron method used for photomultipliers calibration applied for J-PET scanner, a novel PET detector being developed at the Jagiellonian University. Description of calibration method, an example of calibration curve and gain of few R4998 Hamamatsu photomultipliers are presented.
List-mode reconstruction in 2D strip PET
P. Białas, J. Kowal, A. Strzelecki, T. Bednarski, E. Czerwiński, K. Giergiel, Ł. Kapłon, A. Kochanowski, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, I. Moskal, P. Moskal, S. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, K. Szymański, W. Wiślicki, P. Witkowski, M. Zieliński, N. Zoń
abstract
Using a theory of list-mode maximum likelihood
expectation-maximization (MLEM) algorithm, in this contribution,
we present a derivation of the system response
kernel for a novel positron emission tomography (PET)
detector based on plastic scintillators.
Simulations of gamma quanta scattering in a single module of the J-PET detector
K. Szymański, P. Moskal, T. Bednarski, P. Białas, E. Czerwiński, K. Giergiel, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, I. Moskal, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, P. Witkowski, W. Wiślicki, M. Zieliński, N. Zoń
abstract
This article describes simulations of scattering of annihilation gamma quanta in a strip of plastic scintillator. Such strips constitute basic detection modules in a newly proposed Positron Emission Tomography which utilizes plastic scintillators instead of inorganic crystals. An algorithm simulating chain of Compton scatterings was elaborated and series of simulations have been conducted for the scintillator strip with the cross section of 5 mm x 19 mm. Obtained results indicate that secondary interactions occur only in the case of about 8% of events and out of them only 25% take place in the distance larger than 0.5 cm from the primary interaction. It was also established that light signals produced at primary and secondary interactions overlap with the delay which distribution is characterized by FWHM of about 40 ps.
Application of WLS strips for position determination in Strip PET tomograph based on plastic scintillators
J. Smyrski, P. Moskal, T. Bednarski, P. Białas, E. Czerwiński, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, A. Strzelecki, W. Wiślicki, M. Zieliński, N. Zoń
abstract
A method of determination of a gamma quantum absorption point in a plastic scintillator block using a matrix of wavelength-shifting (WLS) strips is proposed. Application of this method for improvement of position resolution in newly proposed PET detectors based on plastic scintillators is presented. The method enables to reduce parallax errors in reconstruction of images which occurs in the presently used Positron Emission Tomography scanners.
TOF-PET detector concept based on organic scintillators
P. Moskal, T. Bednarski, P. Białas, M. Ciszewska, E. Czerwiński, A. Heczko, M. Kajetanowicz, Ł. Kapłon, A. Kochanowski, G. Konopka-Cupiał, G. Korcyl, W. Krzemień, K. Łojek, J. Majewski, W. Migdał, M. Molenda, S. Niedźwiecki, M. Pałka, Z. Rudy, P. Salabura, M. Silarski, A. Słomski, J. Smyrski, J. Zdebik, M. Zieliński
abstract
In this contribution we present a new concept of the large acceptance detector systems based on organic scintillators which may allow for simultaneous diagnostic of large fraction of the human body. Novelty of the concept lies in employing large blocks of polymer scintillators instead of crystals as detectors of annihilation quanta, and in using predominantly the timing of signals instead of their amplitudes.
Strip-PET: a novel detector concept for the TOF-PET scanner
P. Moskal, T. Bednarski, P. Białas, M. Ciszewska, E. Czerwiński, A. Heczko, M. Kajetanowicz, Ł. Kapłon, A. Kochanowski, G. Konopka-Cupiał, G. Korcyl, W. Krzemień, K. Łojek, J. Majewski, W. Migdał, M. Molenda, S. Niedźwiecki, M. Pałka, Z. Rudy, P. Salabura, M. Silarski, A. Słomski, J. Smyrski, J. Zdebik, M. Zieliński
abstract
We briefly present a design of a new PET scanner based on
strips of polymer scintillators arranged in a barrel constituting
a large acceptance detector. The solution proposed is based on
the superior timing properties of the polymer scintillators. The
position and time of the reaction of the gamma quanta in the
detector material will be determined based on the time of arrival
of light signals to the edges of the scintillator strips.
Novel detector systems for the Positron Emission Tomography
P. Moskal, P. Salabura, M. Silarski, J. Smyrski, J. Zdebik, M. Zieliński
abstract
In this contribution we describe a novel solution for the construction of Positron Emission Tomograph. We present
the device allowing for determination of the impact position as well as time and depth of interaction of the annihilation gamma
quanta. The device is comprised of scintillation chamber consisting of organic scintillators surrounding the body of the patient.
We discuss two possible solutions: (i) the tomograph built out of scintillator strips, and (ii) the tomograph built out of the scintillator
plates. The application of the fast scintillators will enable to take advantage of the difference between time of the registration of
the annihilation quanta. The invented method will permit to use a thick layers of detector material with the possibility of measuring
the depth of the gamma quantum interaction (DOI) and the determination of their time of fl ight (TOF), and will allow for increasing
the size of the diagnostic chamber without a signifi cant increase of costs. The method is a subject of two patent applications
[1, 2] which are based on the techniques used in the particle physics experiments [3, 4].
Feasibility studies of Dark Photon searches with the J-PET detector
Justyna Mędrala-Sowa, Elena Perez del Rio, Wojciech Krzemień
abstract
Symposium on new trends in Nuclear and Medical Physics
Towards studies of rare decays of positronium with J-PET
P. Tanty, E. Perez del Rio, P. Moskal
abstract
The positronium system, a bound state of an electron and a positron, is suitable for testing the predictions of quantum electrodynamics (QED) as well as symmetry invariance. The Ps triple state, the ortho-Positronium (o-Ps), which mainly decays to three photons, is further studied to search for decays into 4gamma and 5gamma, the former C-violating decay and the latter never observed. The J-PET is a multi-purpose detector optimized for the detection of photons from positron?electron annihilation and can be used in a broad scope of interdisciplinary investigation. The large acceptance and high angular resolution of the J-PET detector will push the present limits in these forbidden and rare decays. The aim is to reach a sensitivity below O(10^?6) while reducing the uncertainties, thus increasing the sensitivity.
Feasibility studies of dark photon searches with the J-PET detector
J. Mędrala-Sowa, E. Perez del Rio, W. Krzemień
abstract
The positronium, a bound state of electron and positron, is a unique system to perform highly precise tests, due to no hadronic background and precise Quantum Electrodynamics (QED) predictions. Being a system of lepton and antilepton, its properties are precisely described by QED in the Standard Model (SM). The final events topology can be simulated using Monte Carlo techniques. The J-PET detector is a multi-purpose, large acceptance system that is very well-suitable to the studies of positronium decay due to its excellent angular (1?) and timing resolutions. We present preliminary results on the feasibility of searching for Dark Matter (DM) candidates in the decay o-Ps -> invisible with the J-PET, which is wellsuited for the detection of positronium-decay products. Toy Monte Carlo simulations have been prepared to incorporate DM decay models to the oPs decay expectations in order to assess the detector capabilities to search for such an elusive component of our Universe.
J-PET detector approach for testing CP symmetry in the ortho-positronium annihilation
K.V. Eliyan, M. Skurzok, P. Moskal
abstract
Positronium is a suitable leptonic system to test Charge-Parity (CP) discrete symmetry involving the correlations of photons momenta originating from ortho-positronium (o-Ps) annihilation. The photon?photon interaction in the final state due to the vacuum polarization may mimic CP symmetry violation of the order of 10^?9, while weak interaction effects lead to a violation of the order of 10^?14 according to the Standard Model prediction. So far, the experimental limits on CP symmetry violation in the o-Ps decay are set at the level of 10^?4. One of the unique features of the J-PET detector is its ability to measure the polarization direction of the annihilation photons without the magnetic field. The J-PET detector can be used to explore discrete symmetry by looking for probable non-zero expectation values of the symmetry-odd operators, constructed from spin of ortho-Positronium and momentum, and polarization vectors of gamma quanta resulting from o-Ps annihilation. In this work, the J-PET detector experimental and analysis method to improve the sensitivity level at least by one order for CP discrete symmetry studies in the o-Ps decay via symmetry odd operator (e_i k_j), where e_i and k_j are reconstructed polarization and momentum vectors of photons from the o-Ps decays, respectively, will be presented.
Test for non-relativistic QED in decays of positronium atoms
S. Sharma, K. Dulski, P. Moskal
abstract
Positronium (Ps) is a bound state of electron and positron governed by electromagnetic interactions. Precise measurement of its decay rate is an important observational parameter to test theoretical predictions derived from Non-Relativistic Quantum Electrodynamics (NRQED). In this work, we present a new method for measuring the decay rate of Ps atoms, which has the potential to improve the precision and thus the description of the behavior of particles in bound states and to provide insight into the non-relativistic regime of QED.
Exploring the limits of CPT symmetry in ortho-positronium decays with J-PET
N. Chug, On behalf of the J-PET Collaboration
abstract
The CPT symmetry is one of the most fundamental symmetries in physics. Any violation of this symmetry would have profound implications for our understanding of the universe. In this study, we report the CPT symmetry tests in 3? decays of polarised 3S1 positronium using the Jagiellonian Positron Emission Tomography device. The J-PET experiment allows sensitive and precise tests of CPT symmetry by measuring the angular correlation between the spin of ortho-positronium and the momenta direction of the annihilation photons emitted in ortho-positronium decay. The potential of J-PET in determining the full range of the expectation value of this correlation has improved the precision of the CPT symmetry test to 10?4 already. The accuracy of this previous measurement was limited by statistics only. The new test is based on the increased statistics due to the modified experimental setup aiming at the improvement of detection efficiency and due to the usage of different positronium production chambers. The high precision of this test would open the possibility of exploring the limits of CPT symmetry validity in the charged leptonic sector. In this work, we discuss the evaluation of background sources in the CPT symmetry test with J-PET which is a crucial factor in improving the precision of such studies.
Improved test of CPT invariance in ortho-positronium decays at J-PET
N. Chug and A. Gajos, On behalf of the J-PET collaboration
abstract
Symmetry violation under the combined transformation of charge (C), parity (P), and time reversal
(T) in the charged leptonic sector can be sought through the non-vanishing expectation value of
certain angular correlation operators that are odd under the CPT transformation. Here, we discuss
the experimental approach for a CPT symmetry test by measuring angular correlations between
the spin and momenta of photons originating from ortho-positronium (o-Ps?3????) decays. This
experiment is performed with the J-PET detector which measures a broad range of kinematical
configurations of ortho-positronium annihilation into three photons and is the first experiment
to determine the full range of the CPT-odd angular correlation. A novel technique to estimate
the spin of ortho-positronium and momenta of annihilation photons for a single recorded ortho-
positronium event allowed J-PET to measure the expectation value of CPT symmetry odd angular
correlation operator at the precision level of 10?4, a factor of three better than the previous best
result. There are new measures and perspectives for J-PET in improving the sensitivity to CPT
violating effects beyond the level of 10?4 by increasing the efficiency for detection of photons
from ortho-positronium decays by means of using a new modular J-PET detector and spherical
annihilation chamber.
Measuring the correlation between polarization of two photons originating from e+e ? annihilations for PET imaging using J-PET
D. Kumar, S. Sharma and P. Moskal on behalf of J-PET collaboration
abstract
Experimental observation of polarization correlation of entangled photons from positronium atom using J-PET detector
D. Kumar*, S. Sharma and P. Moskal
abstract
Quantum entanglement is one of the fundamental correlations between particles that has not yet been confirmed with high-energy photons. Quantum electrodynamics (QED) predicts that annihilation photons produced by the decay of the singlet state of positronium (Ps) atoms are entangled in their polarization. Since these photons have an energy of 511 keV, there is no polarizer to measure the polarization of these photons. However, the direction of the scattering photons when interacting with an electron via the Compton process depends strongly on the polarization of the photon. Therefore, Compton scattering can be used as a polarization analyser. The polarization direction of the photon can be defined as the cross product of the momentum vector of the incident and scattered photon. By measuring the polarization of annihilation photons originating from Ps decays, their polarization correlation can be determined. Measuring this correlation will for the first time, will answer the open question of studying quantum entanglement in high-energy photons. Moreover, it also have potential applications in PET imaging, where the quality of image reconstruction directly depends on the selection of pure annihilation photons, which can be separated based on the strength of the polarization correlation. In this paper, we report on the method for determining the polarization correlation of annihilation photons using the J-PET detector.
Feasibility study of positronium imaging with Biograph Vision Quadra and Modular J-PET
S. Parzych, J. Baran, E. Yitayew Beyene, M. Conti, A. Coussat, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, K. Valsan Eliyan, A. Gajos, B. Hiesmayr, A. Jędruszczak, K. Kacprzak, M. Kajetanowicz, T. Kaplanoglu, Ł. Kapłon, K. Klimaszewski, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, G. Łapkiewicz, L. Mercolli, W. Migdał, S. Moyo, W. Mryka, S. Niedźwiecki, E. Pérez Del Río, L. Raczyński, A. Rominger, H. Sari, S. Sharma, K. Shi, S. Shivani, R. Shopa, M. Skurzok, W.M. Steinberger, E. Stępień, P. Tanty, F. Tayefi, K. Tayefi Ardebili, W. Wiślicki, P. Moskal
abstract
Positronium Imaging is gaining interest as a new promising method that may improve the diagnostic specificity of Positron Emission Tomography. Recently, the first ex-vivo and in-vivo positronium lifetime images were demonstrated by means of the dedicated multi-photon J-PET system. The latest upgrades of the Biograph Vision Quadra (Siemens Healthineers) to the singles mode acquisition open the possibility of multi-photon imaging. In this simulation-based work, sensitivity of both systems has been assessed as a function of the energy window applied for registration of the prompt photon. The research was conducted using four radioisotopes: 124 I, 68 Ga, 44 Sc, 22 Na, which were chosen due to their medical or laboratory utilization. Simulations were performed with the GATE software. The result indicates that Biograph Vision Quadra provides about 400 times higher sensitivity with respect to the modular J-PET prototype used to demonstrate the first positronium images, assuming full energy acquisition of the prompt photon.
Performance of NEMA characteristics of Modular J-PET
F. Tayefi Ardebili, S. Niedźwiecki, J. Baran, E. Beyene, D. Borys, K. Brzezinski, N. Chug, A. Coussat, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, K. Eliyan, J. Gajewski, A. Gajos, B. Hiesmayr, A. Jędruszczak, K. Kacprzak, M. Kajetanowicz, T. Kaplanoglu, Ł. Kapłon, K. Klimaszewski, G. Korcyl, T. Kozik, W. Krzemień, D. Kumar, G. Łapkiewicz, W. Migdał, S. Moyo, W. Mryka, S. Parzych, E. Pérez del Río, L. Raczyński, S. Sharma, S. Shivani, R. Shopa, M. Skurzok, P. Tanty, K. Tayefi Ardebili, W. Wislicki, E. Stępień, P. Moskal
abstract
The Modular J-PET scanner, developed by the J-PET collaboration, is a new prototype PET scanner developed based on axially arranged plastic scintillators as a large axial field of view (50cm) affordable tomograph. In this study, the performance characteristics of the scanner were evaluated according to NEMA NU2-2018 standards using Monte Carlo simulation. In order to ensure the selection of true coincidence events, certain criteria were established. Specifically, each photon emitting from a single annihilation must deposit at least 200 keV within 4 ns of a coincidence time window. The preliminary results showed that the sensitivity profile peak was 4 cps/kBq at the center of the detector, While the scatter fraction was estimated to be 39% using the single slice rebinning algorithm. Spatial resolution was estimated around 4.5 mm in the radial and tangential direction and 18 mm in the axial direction.
Normalization and scatter corrections for the J-PET scanner
A. Coussat, W. Krzemień, J. Baran, S. Parzych, L. Raczyński, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, J. Gajewski, B. Hiesmayr, K. Valsan Eliyan, A. Jędruszczak, K. Kacprzak, A. Gajos, T. Kaplanoglu, Ł. Kapłon, K. Klimaszewski, T. Kozik, G. Łapkiewicz, G. Korcyl, S. Moyo, D. Kumar, W. Mryka, S. Niedźwiecki, S. Sharma, E. Pérez Del Río, S. Shivani, R. Shopa, P. Tanty, M. Skurzok, K. Tayefi, F. Tayefi, E. Stępień, W. Wiślicki, P. Moskal
abstract
The Jagiellonian PET scanner is a cost-effective large axial FOV Positron Emission Tomography technology that enables multi-photon imaging and is currently under development at the Jagiellonian University. The current 50 cm prototype, named Modular J-PET, is being investigated for various applications. It is well known that PET data can be affected by several effects during acquisition, such as scattered gamma photons or variations in detection efficiency. Consequently, achieving the reconstruction of images of satisfactory quality requires a set of corrections to be applied to each line-of-response. This summary discusses the implementation and performance of scatter and normalization corrections for the Modular J-PET, and their extension prior to the assembly of a total-body Jagiellonian PET scanner. Normalization correction is achieved using component-based normalization, a method particularly suitable for large scanners with a high number of lines-of-response. Scatter correction is achieved using an extension of the single scatter simulation technique that incorporates time-of-flight information. Reconstruction of reference phantoms based on Monte Carlo simulations highlight improvements in image quality. The application of normalization reduces the non-uniformity in the reconstructed image by a factor of 10 in the axial direction and 2 in the radial direction.
Positronium Lifetime Measurements using 82Rb in a Long-Axial FOV PET/CT Scanner
W.M. Steinberger, H. Sari, L. Mercolli, S. Parzych, S. Niedźwiecki, G. Łapkiewicz, P. Moskal, E. Stępień, A. Rominger, K. Shi, M. Conti
abstract
This work details results from two positronium (Ps) lifetime measurements performed in a long-axial FOV PET/CT scanner using 82 Rb. Ps lifetime measurements are of interest for PET because they can yield additional diagnostic information. The first measurement placed drops of a 82 Rb solution in between aluminum disks, quartz disks, and into a gelatin mixture. The extracted ortho-Ps (o-Ps) lifetime for the quartz sample was measured to be 1.53+/-0.04 ns, which agrees well with the previously published value of 1.56+/-0.08 ns. The lifetime of the aluminum is also compared with previous results, however, the lifetime exhibits a longer o-Ps lifetime due to positrons leaking into the surrounding plastic holder. The second measurement performed assessed the uniformity of the extracted lifetimes across a uniform cylinder (20?×30 cm3 ) filled with water and an activity of approximately 73.3 MBq. The resulting histo-image was sliced into 1.25 cm thick cross sections, which resulted in lifetime distributions containing on average 1.98×10 5 +/-1.06×10 4 counts. These lifetime distributions were integral normalized and compared to an averaged lifetime across the uniform cylinder. Overall average deviation in the lifetime measured across the cylinder was determined to be -0.015+/-1.53%.
Modular J-PET with Improved o-Ps Detection Efficiency for CPT Tests
N. Chug and A. Gajos, On behalf of the J-PET Collaboration
abstract
Ninth Meeting on CPT and Lorentz Symmetry, Bloomington, Indiana, May 17-26, 2022
J-PET is a photon detector built of plastic scintillators, which already has been commissioned for CPT studies in the decays of positronium. In the first experiment, J-PET has achieved a sensitivity to CPT violation at a level of 10^{-4}, and now it aims to reach a level of 10^{-5}. This will be done by enhancing the three-photon registration efficiency for ortho-positronium decays using a new layer of densely packed plastic scintillators termed Modular J-PET. We present the simulation studies performed for different experimental detection setups to be used for the next CPT test with the Modular J-PET detector.
Perspective of CP Violation Search by Modular J-PET Detector in the Ortho-Positronium Decay
K.V. Eliyan, M. Skurzok, P. Moskal
abstract
The positronium atom, a bound state of electron and positron, is a suitable
leptonic test site for Charge-Parity (CP) discrete symmetry research.
According to the Standard Model, the photon?photon interaction in the
final state due to the vacuum polarization may mimic CP violation of the
order of 10^-9, while weak interaction effects lead to a violation of the order
of 10^-14. So far, the experimental limits on CP symmetry violation
in the decay of o-Ps are set at the level of 10^-3. The J-PET detector can
be used to explore discrete symmetries by looking for probable non-zero
expectation values of the symmetry-odd operators, constructed from spin
of ortho-Positronium (o-Ps) and momentum, and polarization vectors of
gamma quanta resulting from o-Ps annihilation. The upgraded version
of the J-PET detector, with an additional fourth layer of detection modules
increases signal acceptance, which allows to triple the efficiency of
quanta detection for CP discrete symmetry studies.
Monte Carlo simulation platform and software stack in DOSE-3D project
J. Hajduga, B. Rachwał, T. Szumlak, M. Filipek, T. Fiutowski, W. Górska, P. Jurgielewicza, D. Kabat, K. Kalecińska, Ł. Kapłon, M. Kopeć, S. Koperny, D. Kulig, B. Mindur, J. Moroń, G. Moskal, A. Ruciński, P. Wiącek
abstract
We present building blocks that make up the software stack being developed as part of the Dose-3D project that aims at constructing a next-generation active medical phantom for spatial therapeutic dose distribution reconstruction. The architecture of the custom G4RT application is discussed, and Python-based packages for high-level data processing and analysis are introduced.
Estimation of 511 keV Gamma Scatter Fraction in WLS Layer in Total-Body J-PET; A Simulation Study
K. Tayefi Ardebili, S. Niedzwiecki, P. Moskal
abstract
Positron emission tomography (PET) is essential in medical diagnostics and monitoring therapy. The J-PET Collaboration at Jagiellonian University is developing a new generation of Total-Body PET scanners based on plastic scintillators. One of the Total-Body J-PET designs comprises seven rings, each consisting of 24 modules. A single module is built of 2 layers, each comprises of 16 axially arranged plastic scintillator strips of 330 mm length, read out by silicon photomultiplier (SiPM) arrays from both ends, and an additional layer of 50 wavelength shifter (WLS) bars, placed perpendicular to plastic layers. This study estimates the scatter fraction of the Total-Body J-PET manufactured from plastic scintillator strips according to the NEMA NU 2-2018 standards by using the GATE software. The scatter phantom was simulated as a solid cylinder with a length of 700 mm and an outside diameter equal to 203 mm. At the same time, at a radial distance of 45 mm, we have a hole with a diameter of 6.4 mm where a linear source with total activity of 1 MBq is placed. For data processing, sinograms were generated, and the Single Slice Rebinning (SSRB) algorithm was used for the scatter fraction calculation. As a result, we estimate that addition of the WLS layer is increasing the scatter fraction by 0.67%.
Towards Improving the Sensitivity of the CPT Symmetry in Positronium Decays with the Modular J-PET Detector
N. Chug, A. Gajos
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is the first plastic scintillator-based tomographic device used to test discrete symmetries in the charged leptonic sector. One of such tests is for the CPT symmetry, under the combined transformation of charge, parity, and time reversal in the decays of positronium atoms. J-PET performed its first measurement for the CPT symmetry test by searching for non-vanishing CPT-violating angular correlations between the spin and orientation of the decay plane of ortho-positronium (o-Ps) atoms, which is the triplet state of positronium. The sensitivity of testing CPT symmetry with the J-PET detector reaches the precision level of 10?4. Here, we will discuss the prospects of improving the sensitivity of this test beyond the level of 10?4 by enhancing the photon registration efficiency using a new layer of densely packed plastic scintillators and a spherical annihilation chamber as a positronium production medium.
Developing a phantom for the positronium imaging evaluation
G. Łapkiewicz, S. Niedźwiecki, P. Moskal
abstract
In this contribution, a concept for a new phantom for positronium imaging
with PET scanners is described. The proposed phantom is based on
the NEMA IEC phantom in which six high-activity spheres are filled with
solutions characterized by a different mean ortho-positronium lifetime. A
method for controlling ortho-positronium lifetime is discussed along with
preliminary results. The XAD4 suspended in various fractions of water was
tested as a potential model of a sample with a controlled mean lifetime of
ortho-positronium. The mean lifetime of ortho-positronium for six samples
was estimated by means of the Positronium Annihilation Lifetime Spectroscopy
(PALS). Obtained spectra were fitted with the PALS Avalanche
analysis program and components corresponding to the ortho-positronium
annihilation in the XAD4 pores were established. As a result, the correlations
between the lifetime and production intensity of ortho-positronium
and the concentration of XAD4 in water were determined.
Testing CPT symmetry in ortho-positronium decays with J-PET detector
A. Gajos
abstract
Search for possible violation of combined charge, parity, and time-reversal symmetries is yet another approach for a test of New Physics, therefore a bound state of electron and positron (positronium) as the lightest matter-antimatter system and at the same time an eigenstate of the C and P operators is an unique probe in such endeavour. The test is performed by measurement of angular correlations in the annihilations of the lightest leptonic bound system. With the Jagiellonian Positron Emission Tomograph (J-PET) we have collected an unprecedented range of kinematical configurations of exclusively-recorded annihilations of the positronium triplet state (ortho-positronium) into three photons. Employing a novel technique for estimation of positronium spin axis on the basis of a single event, we determined the complete distribution of an angular correlation between spin and annihilation plane of ortho-positronium. We present recently published result of determined expectation value of this correlation at the precision level of 10^{-4}, with an over three-fold improvement on the previous measurement. We discuss also the prospects for reaching the precision level of 10^{-5} with the CPT symmetry test at the J-PET detector.
Potential of modular J-PET for applications in the field of particle and medical physics
S. Sharma, K. Kacprzak, K. Dulski, S. Niedźwiecki, P. Moskal
abstract
Modular J-PET is the new prototype of the Jagiellonian Positron Emission Tomograph. The portability feature due to its modular design makes it a unique tomograph with a larger axial field of view of 50 cm. The complete ring is composed of 24 modules that can be configured as a diagnostic chamber with a diameter of approximately 76 cm or as a detection setup consisting of several modules for experimental studies where multiple photons are generated in a single event. The J-PET collaboration explicitly studies the decays of the positronium atom (Ps), which is a bound state of electron and positron that self-annihilate into multiple photons. The modular J-PET provides a significant phase space covrage for the registration of photons originating from the decays of Ps atoms. In this paper, we discuss the properties of the modular J-PET and its potential applications in medical and particle physics.
Positronium and Quantum Entanglement Imaging: A New Trend in Positron Emission Tomography
P. Moskal
abstract
We report on the progress in the development of positronium imaging and quantum entanglement imaging achieved
thus far by the J-PET collaboration. Positronium (a bound state of electron and positron) is copiously produced in the human
body during positron emission tomography. Its properties depend on the size of the intra-molecular voids and concentration in them of molecules as e.g. molecular oxygen. Therefore, positronium may serve as a biomarker of tissue pathology and hypoxia.
Recently, the positronium imaging method was developed and the first positronium images of phantoms comprised of tumor
cardiac myxoma and healthy adipose tissues were created by means of the J-PET tomograph. A significant difference in mean
positronium lifetime in cardiac myxoma and adipose tissues opens promising perspectives for the application of positronium
as a cancer diagnostic indicator. It is also important to note that photons originating from the decay of positronium are
quantum entangled in polarisation. Thus, it can be hypothesized that by measuring the degree of entanglement of photons from
positronium annihilation, additional information can be obtained about the molecular environment in which the positronium is
formed. J-PET is the first PET system enabling the determination of linear polarisation of annihilation photons. The measurements
performed with the J-PET detector confirm that the distribution of relative angle between the polarization of 511 keV back-toback
photons is consistent with the assumption that these photons are quantum entangled. These results open up prospects for the
study of quantum entanglement of photons from positronium annihilation in living organisms.
Quantum Sensing for Biomedical Applications
K. Shimazoe, H. Tomita, D. Watts, P. Moskal, A. Kagawa, P.G. Thirolf, D. Budker, C.S. Levin
abstract
Quantum technology, such as the quantum computers, has attracted significant attention in recent years. In nuclear medicine, powerful and highly sensitive molecular imaging modalities such as PET (Positron Emission Tomography), SPECT (Single Photon Emission CT) and MRI (Magnetic Resonance Imaging) provide accurate morphological and functional information. Exploiting certain aspects of quantum mechanics may bring further improvements in sensitivity, spatial resolution and enable novel capabilities in the field of biomedical imaging and sensing. In this workshop, the possibilities of biomedical applications inspired by quantum technology were discussed. The following exciting topics were covered: quantum entanglement in PET, dynamic nuclear polarization toward more sensitive MRI, quantum sensors based on the 229mTh nuclear clock, plans of an advanced high-energy gamma-ray source at CERN, laser-assisted radiation detection, solid-state quantum sensors such as those based on nitrogen vacancy centers in diamond, quantum sensing using cascade multi photons, and a laser-based radioactive isotope analysis.
Introduction of the DOI capable Total-Body J-PET, a simulation study
M. Dadgar, S. Parzych, F. Tayefi, P. Moskal, S. Vandenberghe
abstract
Positron Emission Tomography PET plays a fundamental role in medical diagnosis and oncological research. Due to exceptional performance of PET scanners and continuous advancement, their clinical availability is spreading [1]. The development of Total-Body PET technology is one of the most recent trends in the medical imaging field. Having large axial field of view (AFOV), they provide greater detection area and therefore an increased sensitivity [2]. Nevertheless, alongside many advantages over traditional PET tomographs they are more susceptible to the parallax error, which causes degradation of axial resolution. This is caused by the contribution of most oblique lines of response (LORs) in the acquired data. To overcome this problem the application of a cut ? angular acceptance criterion ? over such LORs has been recommended. Nonetheless, it causes a significant loss of scanner?s sensitivity [3].Jagiellonian PET (J-PET) collaboration from Krakow, Poland is currently developing novel PET tomographs based on the organic, plastic scintillators [4, 1]. Such unique design allows not only for the introduction of cost efficient Total-Body system, but also is able to solve challenges connected with such tomographs. The main aim of this study is to present a novel solution to overcoming the aforementioned problem of degradation in axial resolution in Total-Body scanners by introducing DOI capable detectors based on the J-PET technology.
Recent results on the positronium decay studies with the J-PET detector
E. Czerwinski, J. Raj
abstract
Positronium, as a bound state of electron and positron and the light- est matter-antimatter system and at the same time an eigenstate of the C and P operators is a unique probe to search for possible violation of combined charge, parity, and time-reversal symmetries (CPT). The test is performed by a measure- ment of angular correlations in the annihilations of the lightest leptonic bound system. The J-PET detector is the only device which enables the determina- tion of the polarization of photons from positronium annihilation together with the positronium spin axis on an event-by-event basis. This allows to explore a new class of discrete symmetry odd operators that were not investigated before. The first test of CPT symmetry at J-PET is presented together with preliminary results of CP, P and T symmetry test.
CPT symmetry test in positronium annihilations with the J-PET detector
N. Chug and A. Gajos, On behalf of the J-PET collaboration
abstract
Discrete symmetry under combined transformation of charge, parity and time reversal (CPT) can be tested in the decays of positronium atom, the lightest bound system built of charged leptons. Jagiellonian Positron Emission Tomograph (J-PET) device constructed from plastic scintillators, detects the photons originating from electron positron annihilation. This feature enables J-PET to
study CPT symmetry in the three photon annihilations of the triplet state of positronium. Signs of violation of the CPT symmetry can be sought as a non-vanishing expectation value of an angular correlation operator that is odd under CPT transformation. A technique to estimate the spin of ortho-positronium and momenta of annihilation photons for single recorded ortho-positronium
annihilation events allows J-PET to measure the expectation value of a CPT symmetry odd angular correlation operator. J-PET measures a broad range of kinematical configurations of ortho-positronium annihilation to three photons and is the first experiment to determine the full range of the CPT-odd angular correlation.
From tests of discrete symmetries to medical imaging with J-PET detector
P. Moskal, J. Baran, N. Chug, C. Curceanu, E. Czerwiński, M. Dadgar, K. Dulski, J. Gajewski, A. Gajos, M. Gorgol, B.C. Hiesmayr, B. Jasińska, K. Kacprzak, Ł. Kapłon, H. Karimi, K. Klimaszewski, P. Konieczka, G. Korcyl, T. Kozik, N. Krawczyk, W. Krzemień, E. Kubicz, D. Kumar, S. Niedźwiecki, D. Panek, S. Parzych, E. Perez del Rio, L. Raczyński, J. Raj, A. Ruciński, S. Sharma, Shivani, R.Y. Shopa, M. Silarski, M. Skurzok, E.Ł. Stępień, M. Szczepanek, F. Tayefi, W. Wiślicki
abstract
We present results on CPT symmetry tests in decays of positronium performed with the precision at the level of 10?4, and positronium images determined with the prototype of the J-PET tomograph. The first full-scale prototype apparatus consists of 192 plastic scintillator strips readout from both ends with vacuum tube photomultipliers. Signals produced by photomultipliers are probed in the amplitude domain and are digitized by FPGA-based readout boards in triggerless mode. In this contribution we report on the first two- and three-photon positronium images and tests of CPT symmetry in positronium decays.
Positronium life-time as a new approach for cardiac masses imaging
E. Stępień E. Kubicz, G. Grudzień, K. Dulski, B. Leszczyński, P. Moskal
abstract
Influence of Cosmic Radiation while Testing the Time Reversal Symmetry in the Decay of Ortho-Positronium Atoms using the J-PET detector
J. Raj, E. Czerwiński
abstract
This article reports the influence of cosmic radiation interaction while testing the T-symmetry in metastable triplet states of positronium with the Jagiellonian-Positron Emission Tomograph (J-PET) detector. The J-PET detector developed at Jagiellonian University in Krakow, Poland is one of its kind being based on organic scintillators. J-PET is an axially symmetric and high acceptance scanner that can be used as a multi-purpose detector system. It is well suited to pursue tests of discrete symmetries in decays of positronium in addition to medical imaging. Cosmic rays have been considered as a well known source of background
while performing test measurements with the J-PET detector. It is important to estimate and reject the significant contribution of the cosmic ray interactions within the J-PET detector in order to improve the sensitivity while testing T-symmetry violation. Therefore, the results of cosmic radiation uniquely being separated due to their large energy deposits in plastic scintillator detectors are shown in this article.
Tests of discrete symmetries in positronium decays with the J-PETdetector
E. Czerwiński
abstract
The newly constructed Jagiellonian Positron Emission Tomograph (J-PET) is the first tomograph built from plastic scintillators. As a detector optimized for the registration of photons from the electron-positron annihilations, it also capable to tests discrete symmetries in decays of positronium atoms via the determination of the expectation values of the discrete-symmetries-odd operators, which may be constructed from the spin of the ortho-positronium atom and the momenta and polarization vectors of photons originating from its annihilation.
Test of CPT Symmetry with Positronium at the J-PET Detector
E. Czerwiński
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is the first tomograph built from plastic scintillators capable to test CPT symmetry in decays of positronium atoms. This test is performed via the determination of the expectation value of operators that are odd under discrete symmetries. The J-PET detector is optimized for the registration of photons from electron-positron annihilations, and such operators may be constructed from the spin of ortho-positronium atoms and the momenta and polarization vectors of photons originating from its annihilation.
Positronium Imaging
P. Moskal
abstract
During the positron emission tomography about 40% of positrons annihilations occur through the creation of positronium which may be trapped within and between molecules. Positronium decays in the patient body are sensitive to the nanostructure and metabolism of the tissues. This phenomenon is not used in the present PET diagnostics, yet it is in principle possible to use environment modified properties of positronium as diagnostic biomarkers for cancer therapy. First in-vitro studies show differences of positronium mean lifetime and production probability in the healthy and cancerous tissues, indicating that they may be used as indicators for in-vivo cancer classification. Here we present a method of positronium lifetime imaging in which the lifetime and position of positronium atoms is determined on an event-by-event basis. The method requires application of beta+ decaying isotope emitting prompt gamma (e.g. 44 Sc). We discuss the possibility of determining the time and position of positronium annihilation from the back-to-back photons originating from the interaction of positronium with the surrounding atoms and bio-active molecules. The prompt gamma is used for the determination of the time of the formation of positronium. We estimate that with the total-body PET scanners the sensitivity of the positronium lifetime imaging, which requires coincident registration of the back-to-back annihilation photons and the prompt gamma is comparable to the sensitivities for the metabolic imaging with standard PET scanners.
Potential for biomedical applications of Positron Annihilation Lifetime Spectroscopy (PALS)
E. Kubicz for the J-PET collaboration
abstract
Positron Annihilation Lifetime Spectroscopy (PALS) allows examining structure of materials in nano and sub-nanometer
scale. This technique is based on the lifetime and intensity of ortho-positronium atoms in free volumes of given structures. It is
mostly used for studies in material sciences, but it can also be used for in vivo imaging of the cell morphology as proposed in [1],
[2]. Cancer cells are characterized by an altered macro structure in comparison to normal cells, thus the main objective of these
studies is to compare if these differences can be detected on sub-nanometer level with PALS technique. First studies on standard
PAL spectrometers conducted by Jean [3],[4] and J-PET collaboration [5], [6], give promising results showing differences between
normal and cancer tissues.
This perspective will allow for simultaneous determination of early and advanced stages of carcinogenesis, by observing
changes in biomechanical parameters between normal and tumour cells, and standard PET examination, which can be performed
with the Jagiellonian Positron Emission Tomograph (J-PET), a multi-purpose detector used for investigations with positronium
atoms in life-sciences as well as for development of medical diagnostics. Results of first PALS measurement of cardiac myxoma,
with J-PET detector is presented in this paper. Obtained o-Ps lifetime for tumor tissue is equal to 2.03(01)[ns] and its intensity
25.7(1)%.
Studies of the polarization of gamma photons originating from the decay of positronium atoms
S. Sharma, N. Krawczyk and J. Raj for the J-PET collaboration
abstract
The precise measurements of the Compton scatterings of photons originating from the decay of positronium atoms can reveal information about their polarizations. J-PET detector is constructed of 192 plastic scintillators and is unique to study the scattering correlations of the annihilation photons with an angular precision of several degrees. In this work, we present the first experimental evidence showing the feasibility of measuring the photons relative polarization using the J-PET detector.
Studies of J-PET detector to monitor range uncertainty in proton therapy
J. Baran, J. Gajewski, M. Pawlik-Niedzwiecka, P. Moskal, A. Ruciński on behalf of the J-PET Collaboration
abstract
2019 IEEE Nuclear Science Symposium and Medical Imaging Conference (NSS/MIC), IEEE Xplore 2019 | DOI: 10.1109/NSS/MIC42101.2019.9059793
A problem of range uncertainty is currently one the most challenging in proton radiotherapy. To tackle that issue, the new, affordable, modular, lightweight, portable and reconfigurable technology of plastic scintillator based positron emission tomography was investigated. Monte Carlo simulation study was performed to evaluate the feasibility of the J-PET technology for proton beam range monitoring. Various configurations (single-layer, multi-layer, full ring, dual-head) were considered. 3D PET images were reconstructed using open-source CASToR software and the expected detector signal, as a function of detector acceptance and efficiency, was estimated. A relationship between the dose and activity profiles was investigated. Experimental validation of the presented results is currently under the preparation.
Status and Prospects of Discrete Symmetries Tests in Positronium Decays with the J-PET Detector
M. Silarski
abstract
Positronium is a unique laboratory to study fundamental symmetries in the Standard Model, reflection in space (P), reversal in time (T ), charge conjugation (C) and their combinations. The experimental limits on the C, CP and CPT symmetries violation in the decays of positronium are still several orders of magnitude higher than the expectations. The newly constructed Jagiellonian Positron Emission Tomograph (J-PET) was optimized for the registration of photons from the electron-positron annihilations. It enables tests of discrete symmetries in decays of positronium atoms via the determination of the expectation values of the discrete-symmetries-odd operators. In this article we present the capabilities of the J-PET detector in improving the current precision of discrete symmetries tests and report on the progress of analysis data from the first data-taking runs.
Towards total-body modular PET for positronium and quantum entanglement imaging
P. Moskal
abstract
The purpose of the reported research is (i) the elaboration of the new imaging method based on the in-vivo measurement of properties of positronium produced inside patient during positron emission tomography, and determination of correlations between properties of positronium inside the cancer tissues and histopathological characteristics of cancers, as well as (ii) exploration of possibilities of the determination of the linear polarization of annihilation photons and development of novel prognostic indicators for cancer diagnostics based on the quantum information from (multipartite) entanglement of photons originating from the positronium decay.During PET diagnosis positronium may be trapped inside free volumes between and within molecules of the examined patient. Currently, in the PET technique, the phenomenon of positronium production is neither recorded nor used for imaging. Yet in about 40% cases, the electron-positron annihilation proceeds in the tissue via creation of positronium. The properties of positronium (such as e.g. mean lifetime or ratio of decay rates into two and three photons) depend on the size of the free volumes between atoms and there are indications that they are correlated with the stage of the development of metabolic disorders of the human tissues. Therefore, an image of properties of positronium formed inside the human body may deliver new information complementary to SUV index and useful for the diagnosis.Moreover, recent theoretical studies have proven that the entanglement in the three-photon state from the decay of ortho-positronium survives surprisingly also for mixed scenarios expected in human tissues. Hence, detecting entanglement of photons originating from positronium may enable the extraction of quantum properties of the surrounding tissue environment.We discuss (i) results of the feasibility studies of the positronium mean-lifetime image reconstruction with the total-body PET scanner from plastic scintillators, as well as (ii) results of pilot studies of the mean lifetime of positronium in the healthy and tumorous tissues operated from the patients. Performed experiments show that properties of positronium atoms in uterine tissues operated from human patients reveals meaningful differences between healthy and tumorous tissues. We also discuss results of the feasibility studies of the polarization of annihilation photons with the J-PET tomograph in which annihilation photons interact predominantly via Compton scattering. Registration of both primary and scattered photons enables to determinate the linear polarization of the primary photon on the event by event basis and hence enables to witness the entanglement of annihilation photons in polarization based on Mutually Unbiased Bases. The performed simulations indicate that in the future with the total-body PET and improved time resolution it shall be feasible to reconstruct images of positronium properties in-vivo during the routine PET diagnosis.
Plastic scintillator based PET detector technique for proton therapy range monitoring: A Monte Carlo study
A. Rucinski, J. Baran, M. Garbacz, M. Pawlik-Niedzwiecka, P. Moskal
abstract
Currently a positron emission tomography (PET) based on novel, cutting-edge technology is developed by the Jagiellonian-PET (J-PET) collaboration. In this contribution, the principle of plastic scintillator based detector system, J-PET and the investigation of its feasibility for proton beam therapy range monitoring will be presented. Results of Monte Carlo simulation studies aiming at the characterization of secondary radiation induced by a proton beam in a PMMA phantom and detected by the J-PET scanner will be shown. Accounting for detector acceptance and PET-gamma detection efficiency in the plastics the diagnostic J-PET scanner can acquire 1.7×10?5 PET gammas per primary proton. The J-PET detector configurations and signal acquisition during and after the therapy is discussed.
Tests of discrete symmetries in positronium decays with the J-PET detector
M. Silarski
abstract
As a relatively simple and purely leptonic state positronium consti-tutes a unique system to study discrete symmetries with precision limited onlyby the effects due to the weak interaction and photon-photon scattering. Theexperimental tests in the positronium decays were performed only on theC,CPandCPTsymmetries with sensitivity much smaller than the predictions whichopens a large window to search for phenomena beyond the Standard Model. Inthis article we present capability of the J-PET detector to improve the current precision of discrete symmetries tests in the decays of positronium atom.
Plastic-scintillator based PET detector for proton beam therapy range monitoring: preliminary study
A. Rucinski, J. Baran, M. Garbacz, M. Pawlik-Niedzwiecka, P. Moskal
abstract
The new ADAM?s tool demonstrates suitable performances to test, in realistic patient-like conditions, tracking systems based on soft tissue detection.
Study of the time reversal symmetry in the decay of ortho-Positronium atoms using the J-PET detector
J. Raj, M. Silarski
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is a novel device based on organic scintillators being developed at Jagiellonian University in Kraków, Poland. J-PET is an axially symmetric and high acceptance scanner that can be used as a multi-purpose detector system. It is well suited to pursue tests of discrete symmetries in decays of positronium in addition to medical imaging. J-PET enables measurement of both momenta and polarization vectors of annihilation photons. The latter is a unique feature of the J-PET detector which allows study of the time reversal symmetry violation operator constructed solely from the annihilation photons momenta before and after scattering within the detector.
Time Over Threshold as a measure of energy response of plastic scintillators used in the J-PET detector
S. Sharma
abstract
The Jagiellonian Positron Emission Tomograph (J-PET) is a multi-purpose detector being developed to provide an economical alternative of com-mercially available PETs as well as to perform the tests on the discrete sym-metries and entanglement. It is composed of 192 plastic scintillators axiallyarranged in three cylindrical layers. In the framework of J-PET detector, Time-Over-Threshold (TOT) approach is adopted for the signal readouts in order toutilize the excellent time resolution of the plastic scintillators. In this paper, wepresent a method elaborated for establishing a relation between TOT and energyloss.
The tests of CP and CPT symmetry using the J-PET detector
M. Mohammed, A Gajos
abstract
Symmetries under the parity transformation (P), charge-conjugation (C) and time reversal (T) are of fundamental importance in nuclear and elementary particle physics. Studies of the observables violating the combined CP symmetry constitute precise tests of the Standard Model. However, CP violation was observed to date only for systems involving quarks, raising the importance of searches its manifestations e.g. in purely leptonic systems. The 3? decay of spin-aligned ortho-positronium atoms (o-Ps) can be used to test CP invariance in such a purely leptonic system. The Jagiellonian Positron Emission Tomograph (J-PET) detection system enables experimental tests of CP and CPT through measurement of the expectation values of angular correlation operators odd under these transformations and constructed from (i) spin vector of the ortho-positronium atom, (ii) co-planar momentum vectors of photons originating from the decay of the positronium atom, and (iii) linear polarization direction of annihilation photons. Precise experimental symmetry tests with J-PET are possible thanks to a dedicated reconstruction technique of 3? ortho-positronium decays and a positronium production chamber including a highly porous aerogel target, whose setup allows for determining the orthopositronium spin polarization without the use of an external magnetic field.
Implementation of the conjugate gradient algorithm on FPGA devices
G. Korcyl, P. Korcyl
abstract
Results of porting parts of the Lattice Quantum Chromodynamics code to modern FPGA devices are presented. A single-node, double precision implementation of the Conjugate Gradient algorithm is used to invert numerically the Dirac-Wilson operator on a 4-dimensional grid on a Xilinx Zynq evaluation board. The code is divided into two software/hardware parts in such a way that the entire multiplication by the Dirac operator is performed in programmable logic, and the rest of the algorithm runs on the ARM cores. Optimized data blocks are used to efficiently use data movement infrastructure allowing to reach intervals of 1 clock cycle. We show that the FPGA implementation can offer a comparable performance compared to that obtained using Intel Xeon Phi KNL.
Studies of discrete symmetries in decays of positronium atoms
E. Czerwiński, C. Curceanu, K. Dulski, A. Gajos, M. Gorgol, A. Heczko, B. C. Hiesmayr, B. Jasińska, D. Kisielewska, G. Korcyl, B. Korzeniak, P. Kowalski, T. Kozik, W. Krzemień, E. Kubicz, W. Migdał, M. Mohammed, S. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczyński, J. Raj, Z. Rudy, S. Sharma, S. Shivani, R. Y. Shopa, M. Silarski, M. Skurzok, W. Wiślicki, B. Zgardzińska, M. Zieliński and P. Moskal
abstract
A positronium - a bound state of electron and positron - is an eigenstate of parity and charge conjugation operators which decays into photons. It is a unique laboratory to study discrete symmetries whose precision is limited, in principle, by the effects due to the weak interactions expected at the level of 10?14 and photon-photon interactions expected at the level of 10-9.
The Jagiellonian Positron Emission Tomograph (J-PET) is a detector for medical imaging as well as for physics studies involving detection of electronpositron annihilation into photons. The physics case covers the areas of discrete symmetries studies and genuine multipartite entanglement. The J-PET detector has high angular and time resolution and allows for determination of spin of the positronium and the momenta and polarization vectors of annihilation quanta. In this article, we present the potential of the J-PET system for studies of discrete symmetries in decays of positronium atoms.
Studies of the diecrete symmetries in Nature
P. Moskal
abstract
We exist, so there must also be some sort of asymmetry between matter and antimatter. Otherwise, the whole matter and antimatter would long ago have turned into photons, ie light, as a result of mutual annihilation of particles and antiparticles. The explanation of this asymmetry, essentially identical with the explanation of the existence of matter in general, is one of the most interesting cognitive challenges of modern physics and cosmology.
J-PET: A novel TOF-PET detector based on plastic scintillators
Paweł Moskal, Dominika Alfs, Tomasz Bednarski, Piotr Białas, Catalina Curceanu, Eryk Czerwiński, Kamil Dulski, Aleksander Gajos, Bartosz Głowacz, Marek Gorgol, Beatrix Hiesmayr, Bożena Jasińska, Daria Kamińska, Grzegorz Korcyl, Paweł Kowalski, Tomasz Kozik, Wojciech Krzemień, Ewelina Kubicz, Muhsin Mohammed, Monika Pawlik-Niedźwiecka, Szymon Niedźwiecki, Marek Pałka, Lech Raczyźski, Zbigniew Rudy, Oleksandr Rundel, Neha Gupta Sharma, Michał Silarski, Jerzy Smyrski, Adam Strzelecki, Anna Wieczorek, Wojciech Wiślicki, Bożena Zgardzińska, Marcin Zieliński
abstract
Statistical Analysis of Time Resolution of the J-PET Scanner
L. Raczyński, W. Wiślicki, P. Kowalski, W. Krzemień, D. Alfs, T. Bednarski, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, M. Gorgol, B. Hiesmayr, B. Jasińska, D. Kamińska, G. Korcyl, T. Kozik, N. Krawczyk, E. Kubicz, M. Mohammed, M. Pawlik-Niedźwiecka, S. Niedźwiecki, M. Pałka, Z. Rudy, O. Rundel, N. Gupta Sharma, M. Silarski, J. Smyrski, A. Strzelecki, A. Wieczorek, B. Zgardzińska, M. Zieliński, P. Moskal
abstract
Studies of discrete symmetries in a purely leptonic system using the Jagiellonian Positron Emission Tomograph
P. Moskal, D. Alfs, T. Bednarski, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, N. Gupta-Sharma, M. Gorgol, B. C. Hiesmayr, B. Jasińska, D. Kamińska, O. Khreptak, G. Korcyl, P. Kowalski, W. Krzemień, N. Krawczyk, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, M. Silarski, J. Smyrski, A. Wieczorek, W. Wiślicki, B. Zgardzińska, and M. Zieliński
abstract
Discrete symmetries such as parity (P), charge-conjugation (C) and time reversal (T) are of fundamental importance in physics and cosmology. Breaking of charge conjugation symmetry (C) and its combination with parity (CP) constitute necessary conditions for the existence of the asymmetry between matter and antimatter in the observed Universe. The presently known sources of discrete symmetries violations can account for only a tiny fraction of the excess of matter over antimatter. So far CP and T symmetries violations were observed only for systems involving quarks and they were never reported for the purely leptonic objects. In this article we describe briefly an experimental proposal for the test of discrete symmetries in the decays of positronium atom which is made exclusively of leptons. The experiments are conducted by means of the Jagiellonian Positron Emission Tomograph (J-PET) which is constructed from strips of plastic scintillators enabling registration of photons from the positronium annihilation. J-PET tomograph together with the positronium target system enable to measure expectation values for the discrete symmetries odd operators constructed from (i) spin vector of the ortho-positronium atom, (ii) momentum vectors of photons originating from the decay of positronium, and (iii) linear polarization direction of annihilation photons. Linearly polarized positronium will be produced in the highly porous aerogel or polymer targets, exploiting longitudinally polarized positrons emitted by the sodium 22Na isotope. Information about the polarization vector of orthopositronium will be available on the event by event basis and will be reconstructed from the known position of the positron source and the reconstructed position of the orthopositronium annihilation. In 2016 the first tests and calibration runs are planned, and the
data collection with high statistics will commence in the year 2017.
J-PET detector system for studies of the electron-positron annihilations
M. Pawlik-Niedźwiecka, O. Khreptak, A. Gajos, A. Wieczorek, D. Alfs, T. Bednarski, P. Białas, C. Curceanu, E. Czerwiński, K. Dulski, B. Głowacz, N. Gupta-Sharma, M. Gorgol, B. C. Hiesmayr, B. Jasińska, D. Kamińska, G. Korcyl, P. Kowalski, W. Krzmień, N. Krawczyk, E. Kubicz, M. Mohammed, Sz. Niedźwiecki, L. Raczyński, Z. Rudy, M. Silarski, W. Wiślicki, B. Zgardzińska, M. Zieliński, and P. Moskal
abstract
Jagiellonian Positron Emission Tomograph (J-PET) has been recently constructed at the Jagiellonian University as a prototype of a cost-effective scanner for the metabolic imaging of the whole human body. J-PET detector is optimized for the measurement of momentum and polarization of photons from the electron-positron annihilations. It is built out of strips of plastic scintillators, forming three cylindrical layers. As detector of gamma quanta it will be used for studies of discrete symmetries and multiparticle entanglement of photons originating from the decays of ortho-positronium atoms.
A novel TOF-PET detector based on plastic scintillators
W. Krzemien, D. Alfs, T. Bednarski, P. Białas, E. Czerwiński, K. Dulski, A. Gajos, B. Głowacz, M. Gorgol, ´ B. Jasińska, D. Kamińska, Ł. Kapłon, G. Korcyl, P. Kowalski, T. Kozik, E. Kubicz, M. Mohammed, ´ Sz. Niedźwiecki, M. Pałka, M. Pawlik-Niedźwiecka, L. Raczyński, Z. Rudy, O. Rundel, N.G. Sharma, M. Silarski, A. Słomski, K. Stola, A. Strzelecki, A. Wieczorek, W. Wiślicki, B. K. Zgradzińska, M. Zieliński, P. Moskal
abstract
The Jagiellonian-PET (J-PET) collaboration is developing
a novel TOF-PET tomography scanner based mainly
on the timing of signals instead of their amplitudes for the
reconstruction of Lines-of-Response, therefore a very precise time
resolution is one of the main challenges of the project. The
novelty of the concept lies in employing long strips of plastic
scintillators instead of crystals as detectors of the annihilation
quanta. The diagnostic chamber consists of plastic scintillator
strips readout by pairs of photomultipliers arranged axially
around a cylindrical surface. To take advantage of the superior
timing properties of plastic scintillators, the signals are sampled
in the voltage domain with an accuracy of 20 ps by novel ultrafast
electronics, and the data are collected by the FPGA-based
trigger-less data acquisition system. The hit-position and hittime
are reconstructed by the dedicated reconstruction methods
based on the compressing sensing theory and a library of
synchronized model signals. The solutions are subject of sixteen
patent applications. So far, a time-of-flight resolution of 125 ps
(?) was achieved for a double-strip prototype with 30 cm fieldof-view
(FOV). It is by more than a factor of two better than the
TOF resolution achievable in current TOF-PET modalities and
at the same time, the FOV of 30 cm long prototype is significantly
larger with respect to typical commercial PET devices. The axial
geometry gives unique possibilities of combining J-PET with
Computed Tomography or with Magnetic Resonance Imaging,
allowing to perform the simultaneous scan of the patient with
both methods.
System Response Kernel Calculation for List-mode Reconstruction in Strip PET Detector
P. Białas, J. Kowal, A. Strzelecki, T. Bednarski, E. Czerwiński, Ł. Kapłon, A. Kochanowski, G. Korcyl, P. Kowalski, T. Kozik, W. Krzemień, M. Molenda, P. Moskal, Sz. Niedźwiecki, M. Pałka, M. Pawlik, L. Raczyński, Z. Rudy, P. Salabura, N. Gupta-Sharma, M. Silarski, A. Słomski, J. Smyrski, W. Wiślicki, M. Zieliński
abstract
Reconstruction of the image in Positron Emission Tomographs (PET) requires the knowledge of the system response kernel which describes the contribution of each pixel (voxel) to each tube of response (TOR). This is especially important in list-mode reconstruction systems, where an efficient analytical approximation of such function is required. In this contribution, we present a derivation of the system response kernel for a novel 2D strip PET.
Application of Compressive Sensing Theory for the Reconstruction of Signals in Plastic Scintillators
L. Raczyński, P. Kowalski, T. Bednarski, P. Białas, E. Czerwiński, Ł. Kapłon, A. Kochanowski, G. Korcyl, J. Kowal, T. Kozik, W. Krzemień, M. Molenda, P. Moskal, Sz. Niedźwiecki, M. Pałka, M. Pawlik, Z. Rudy, P. Salabura, N.G. Sharma, M. Silarski, A. Słomski, J. Smyrski, A. Strzelecki, W. Wiślicki, M. Zieliński
abstract
Compressive Sensing theory says that it is possible to reconstruct a measured signal if an enough sparse representation of this signal exists in comparison to the number of random measurements. This theory was applied to reconstruct signals from measurements of plastic scintillators. Sparse representation of obtained signals was found using SVD transform.
MATRIX-PET: A novel PET detector concept based on large blocks of organic scintillators
P. Moskal, T. Bednarski, A. Heczko, M. Kajetanowicz, Ł. Kapłon, A. Kochanowski, G. Konopka - Cupiał, G. Korcyl, W. Krzemień, K. Łojek, W. Migdał, M. Molenda, S. Niedzwiecki, P. Salabura. M. Silarski, A. Słomski, J. Smyrski, Z. Rudy, J. Zdebik, M. Zieliński
abstract
Matrix-PET is a novel detector solution for the Positron Emission Tomography. It is one of the
two methods which is developed at present at the Jagiellonian University.
STRIP-PET: Concept of TOF-PET scanner based on polymer scintillator strips
P. Moskal, T. Bednarski, A. Heczko, M. Kajetanowicz, Ł. Kapłon, A. Kochanowski, G. Konopka - Cupiał, G. Korcyl, W. Krzemień, K. Łojek, W. Migdał, M. Molenda, S. Niedźwiecki, P. Salabura. M. Silarski, A. Słomski, J. Smyrski, Z. Rudy, J. Zdebik, M. Zieliński
abstract
The aim of the poster is to present an idea of a new PET scanner based on strips of polymer scintillators
arranged in a large acceptance detector system which may allow a simultaneous diagnostic
of a large fraction of (or even the whole) human body.
Polymer Scintillator Detectors for TOF-PET with Large Longitudinal Field of View
P. Moskal, T. Bednarski, A. Heczko, M. Kajetanowicz, Ł. Kapłon, A. Kochanowski, G. Konopka - Cupiał, G. Korcyl, W. Krzemień, K. Łojek, W. Migdał, M. Molenda, S. Niedzwiecki, P. Salabura. M. Silarski, A. Słomski, J. Smyrski, Z. Rudy, J. Zdebik, M. Zieliński
abstract
In this contribution we present a concept of the large acceptance detector systems based on
the organic scintillators which in the future may allow for simultaneous diagnostic of large fraction
of the human body.